You must log in to edit PetroWiki. Help with editing
Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information
Message: PetroWiki content is moving to OnePetro! Please note that all projects need to be complete by November 1, 2024, to ensure a smooth transition. Online editing will be turned off on this date.
Gate valve
Gate valve is defined in API SPEC 6A as a valve assembly with a closure mechanism operating within the body, 90° to the conduit, to affect a closure.[1] Gate valves are commonly used in the wellhead section of the well either as a side outlet valve in the spools or in the Christmas tree.
Gate valves have two modes, either fully open or fully closed. This distinguish the gate valve from the chole valve. The gate valve will allow the fluid to follow or it will completely stop it. On the other hand, a choke valve will restrict the flow.
Gate valves have several components including but not limited to:
- Gate
- Seat
- Stem
- Stem Packing (Seal)
- Bearings
- Grease fitting
- Studs and nuts
- Hand wheel