You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Pages without language links

Jump to navigation Jump to search

The following pages do not link to other language versions.

Showing below up to 500 results in range #1 to #500.

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)

  1. "internal diameter"
  2. 4.11 Fundamental research in projects, facilities, and construction
  3. AFE: cementing
  4. AFE: completion equipment
  5. AFE: drilling fluids
  6. AFE: drilling rig and tools
  7. AFE: location preparation
  8. AFE: projected drilling time
  9. AFE: rental equipment
  10. AFE: supervision and administration
  11. AFE: support services
  12. AFE: transportation
  13. AFE: tubulars
  14. AFE: wellhead equipment
  15. AFE and initial project cost estimate
  16. API Standard ANSI/API RP 10B-2 1ST ED (E1)
  17. Acid additives
  18. Acid fracturing
  19. Acid placement and coverage
  20. Acid treatment design
  21. Acidizing candidates
  22. Acidizing horizontal wells
  23. Acidizing preparations
  24. Acidizing safety and environmental protection
  25. Acoustic anisotropy in rock formation
  26. Acoustic logging
  27. Acoustic logging tools
  28. Acoustic logging while drilling
  29. Acoustic velocity dispersion and attenuation
  30. Acquiring bottomhole pressure and temperature data
  31. Actuator
  32. Additional causes of formation damage
  33. Advanced acoustic data analysis
  34. Aggregation of forecasts
  35. Air drilling
  36. Air emissions
  37. Alkaline-surfactant-polymer (ASP) flooding
  38. Alkaline flooding
  39. Alternate ESP configurations
  40. Alternate PCP system configurations
  41. Alternating current motor drives
  42. Alternating current motors
  43. American petroleum institute
  44. American petroleum institute (API) standards
  45. Anisotropy analysis
  46. Application of risk and decision analysis
  47. Applications of intelligent wells
  48. Applications of nanotechnology
  49. Approximate conversion factors
  50. Arctic well completions
  51. Areal displacement in a waterflood
  52. Artificial lift
  53. Artificial lift selection methods
  54. Asphaltene deposition and plugging
  55. Asphaltene precipitation
  56. Asphaltene problems in production
  57. Asphaltenes and waxes
  58. Assessing reservoir management
  59. Associated and nonassociated gas
  60. Authority for expenditures (AFE)
  61. Automated drilling
  62. Automated oilfield
  63. Automated well construction
  64. Autonomous vehicles
  65. Barite sag
  66. Basic elements of a reservoir characterization study
  67. Basic symbols in alphabetical order
  68. Basic vibration analysis
  69. Basins and fields
  70. Bessel functions in transient analysis
  71. Bifuel
  72. Binary phase diagrams
  73. Biodegradation
  74. Biological monitoring
  75. Biological process for wastewater treatment
  76. Biological processes for wastewater treatment
  77. Blockchain
  78. Borehole gravimetry
  79. Borehole imaging
  80. Borehole instability
  81. Borehole seismic applications
  82. Bottom hole assembly (BHA) design for directional control
  83. Bottomhole pressure and temperature gauges
  84. Boundary effects in diagnostic plots
  85. Building geomechanical models
  86. Burgan
  87. CBM basin assessment
  88. CBM case studies
  89. CBM economics
  90. CBM production operations
  91. CBM reservoir evaluation
  92. CBM reservoir fundamentals
  93. CBM well drilling and completion
  94. CHOPS case histories
  95. CHOPS operational and monitoring issues
  96. CHOPS physical mechanisms
  97. CHOPS production rate increase mechanisms
  98. CHOPS reservoir assessment and candidate screening
  99. CHOPS sand management
  100. CHOPS simulation
  101. CIRP
  102. CO2 miscible flooding case studies
  103. CO2 sequestration
  104. CT control and monitoring equipment
  105. Calculating PVT properties
  106. Calculating gas properties
  107. Calculation methods for directional survey
  108. Capillary pressure
  109. Capillary pressure models
  110. Carbon oxygen logs
  111. Carbonate reservoir geology
  112. Carbonate reservoir with waterflood and miscible injection
  113. Cased hole completions
  114. Casing-annulus-flow installation design
  115. Casing and tubing
  116. Casing and tubing buckling
  117. Casing collar locator
  118. Casing design
  119. Casing drilling
  120. Casing inspection logs
  121. Cement bond logs
  122. Cement composition and classification
  123. Cement hydration
  124. Cement slurry accelerators
  125. Cement slurry design
  126. Cement slurry design testing
  127. Cement slurry dispersants
  128. Cement slurry extenders
  129. Cement slurry fluid-loss-control additives (FLAs)
  130. Cement slurry retarders
  131. Cement slurry weighting agents
  132. Cementing hardware
  133. Cementing operations
  134. Centrifugal compressor
  135. Centrifugal pumps
  136. Challenges in drilling salt formations and rubble zones
  137. Challenges with probabilistic models
  138. Challenging the current barriers to forecast improvement
  139. Chamber lift
  140. Champion page
  141. Chemical gas tracers
  142. Chemical water tracers
  143. Circulatability treatment in cementing
  144. Classification and registration of offshore drilling units
  145. Coalbed methane
  146. Coalescers
  147. Coiled tubing
  148. Coiled tubing applications
  149. Coiled tubing drilling
  150. Coiled tubing equipment design
  151. Coiled tubing fatigue
  152. Cold heavy oil production with sand
  153. Collecting data while drilling
  154. Combination completions
  155. Combining CHOPS and other production technologies
  156. Commercial and economic assumptions in production forecasting
  157. Compaction drive reservoirs
  158. Comparison of permeability estimation models
  159. Completing underbalanced wells
  160. Completion flow control accessories
  161. Completion systems
  162. Compliant and floating systems
  163. Compositional effects during immiscible gas injection
  164. Compositional simulation of miscible processes
  165. Compressed natural gas (CNG)
  166. Compressional and shear velocities
  167. Compressive strength of rocks
  168. Compressors
  169. Conducting the acidizing procedure
  170. Conformance improvement
  171. Conformance improvement gel treatment design
  172. Conformance problems
  173. Connate water saturation evaluation
  174. Contact time in cementing
  175. Continuous and fullbore spinner flowmeters
  176. Continuous vibration systems
  177. Contribute what you know is right
  178. Controllable verses non controllable forecast factors
  179. Controlling excess water production
  180. Controlling liquid leaks from tanks
  181. Controlling precipitates due to acidizing
  182. Conventional applications of acoustic logging
  183. Conventional ship and barge-shaped rigs
  184. Conversion factors for the vara
  185. Converting geothermal to electric power
  186. Core analyses in tight gas reservoirs
  187. Coriolis gas flowmeters
  188. Corrections to core measurements of permeability
  189. Corrosion problems in production
  190. Crude oil characterization
  191. Cuttings analysis during mud logging
  192. Cuttings transport
  193. Cyber security
  194. Cyclic CO2 injection
  195. Cyclic steam stimulation
  196. Cyclic steam stimulation design
  197. D-factor
  198. DNA fingerprinting for reservoir characterization
  199. DTSG Past Events
  200. Data collection for well planning
  201. Data driven approaches to production management
  202. Decision analysis: additional tools
  203. Decision tree analysis
  204. Deep hard-rock drilling
  205. Deepwater drilling
  206. Dehydration with deliquescing dessicants
  207. Dehydration with glycol
  208. Dehydration with refrigeration and hydrate suppression
  209. Deliverability testing of gas wells
  210. Demister
  211. Density logging
  212. Desalting
  213. Design considerations and overall comparisons of artificial lift
  214. Design for decommissioning
  215. Design of uncertainty models
  216. Designing 3D seismic surveys
  217. Designing a hydraulic pump installation
  218. Designing a miscible flood
  219. Designing an underbalanced drilling operation
  220. Designing single well chemical tracer test for residual oil
  221. Determination of flow efficiency and skin
  222. Determining depth to set casing
  223. Determining stress orientation
  224. Diagnostic plots
  225. Diagonalizing the permeability tensor
  226. Diatomite
  227. Differential-pressure pipe sticking
  228. Differential calculus refresher
  229. Digital oilfields
  230. Digital transformation
  231. Digital transformation study group (SPE-GCS)
  232. Directional deviation tools
  233. Directional drilling
  234. Directional survey
  235. Directional survey errors
  236. Directional survey for 3D reservoir modeling
  237. Directional survey instruments
  238. Directional well profile: overburden section
  239. Directional well profile: reservoir penetration section
  240. Directional well profile: surface-hole section
  241. Discounting and risking in production forecasting
  242. Displacement efficiency of immiscible gas injection
  243. Disproportionate permeability reduction
  244. Dissolved constituents in produced water
  245. Diverting spinner flowmeter
  246. Documentation and reporting in production forecasting
  247. Downhole CT tool connections
  248. Downhole PC pump selection and sizing
  249. Downhole PC pumps
  250. Downhole equipment for UBD operations
  251. Downhole fluid sampling
  252. Downhole hydraulic pump installations
  253. Downhole hydraulic pump types
  254. Downhole magnetic surveys
  255. Downhole processing candidate screening
  256. Downhole processing overview
  257. Downhole processing technology
  258. Downhole sucker-rod pumps
  259. Downhole tool communication
  260. Drake Well
  261. Drill bit economics
  262. Drill bit hydraulics
  263. Drillbotics
  264. Drilling HP/HT wells
  265. Drilling a well
  266. Drilling automation
  267. Drilling data management
  268. Drilling data management systems
  269. Drilling dynamics
  270. Drilling fluid challenges
  271. Drilling fluid environmental considerations
  272. Drilling fluid tests
  273. Drilling fluid types
  274. Drilling fluids
  275. Drilling induced formation damage
  276. Drilling microsystems
  277. Drilling problems
  278. Drilling safety
  279. Drilling waste management
  280. Drillpipe failures
  281. Dry dessicant dehydration
  282. Dry gas reservoirs
  283. Dual gradient drilling systems
  284. Dynamic data
  285. Dynamic wellbore pressure prediction
  286. ESP centrifugal pump
  287. ESP design
  288. ESP motors
  289. ESP optional components
  290. ESP power cable
  291. ESP surface motor controllers
  292. ESP system selection and performance calculations
  293. Economics of treating emulsions
  294. Economics symbols in alphabetical order
  295. Edit
  296. Ekofisk field
  297. Elastic wellbore stress concentration
  298. Elastomers
  299. Elastomers for PCP systems
  300. Electrical distribution systems
  301. Electrical engineering considerations for electromagnetic heating of oil
  302. Electrical grounding
  303. Electrical heating
  304. Electrical submersible pumps
  305. Electrical systems
  306. Electrode resistivity devices
  307. Electromagnetic heating of oil
  308. Electromagnetic heating process
  309. Electromagnetic logging while drilling
  310. Elevated temperature applications of PCP
  311. Emissions from oil and gas production operations
  312. Empire Abo field
  313. Empirical methods in production forecasting
  314. Emulsion treating methods
  315. Emulsion treating subsystems
  316. Energy dissipation rate
  317. Enhanced oil recovery (EOR)
  318. Enriched hydrocarbon miscible flooding case studies
  319. Environment
  320. Equations of state
  321. Equations of state for miscible processes
  322. Equilibrium of water and hydrocarbon systems with hydrates
  323. Equilibrium of water and hydrocarbon systems without hydrates
  324. Equipment and design for intelligent wells
  325. Equipment related drilling problems
  326. Establishing input for production forecasting
  327. Estimating average reservoir pressure from diagnostic plots
  328. Estimating cost and time
  329. Estimating horizontal well productivity
  330. Estimating mechanical properties with seismic
  331. Estimating permeability based on Kozeny-Carman equation
  332. Estimating permeability based on grain size
  333. Estimating permeability based on pore dimension
  334. Estimating permeability based on surface area and water saturation
  335. Estimating permeability considering mineralogy
  336. Estimating permeability from well log data
  337. Estimating reservoir properties with nonseismic techniques
  338. Evaluating IOR potential with single well chemical tracer test
  339. Evaluation of acid treatments
  340. Evaluation of conformance improvement gels
  341. Events related to digital transformation
  342. Expandable tubulars
  343. Extended reach wells
  344. External pressure loads on casing and tubing strings
  345. Facilities for steam generation
  346. Facility operability
  347. Field applications of conformance improvement foams
  348. Field applications of conformance improvement gel treatments
  349. Field applications of resin for conformance improvement
  350. Field experience with well to well tracer tests
  351. Field performance of polymer waterflooding
  352. Field tests of electromagnetic heating of oil
  353. First law of thermodynamics
  354. Fixed platform rigs
  355. Fixed roof tanks
  356. Fixed steel and concrete gravity base structures
  357. Flare and vent disposal systems
  358. Floating roof tanks
  359. Flow-after-flow tests for gas wells
  360. Flow assurance for offshore and subsea facilities
  361. Flow equations for gas and multiphase flow
  362. Flow through chokes
  363. Fluid capacitance logging
  364. Fluid contacts identification
  365. Fluid flow in PCP systems
  366. Fluid flow in horizontal wells
  367. Fluid flow in hydraulically fractured wells
  368. Fluid flow in naturally fractured reservoirs
  369. Fluid flow in porous media
  370. Fluid flow through permeable media
  371. Fluid flow with formation damage
  372. Fluid friction
  373. Fluid identification and characterization
  374. Fluid identification logging in high angle wells
  375. Fluid mechanics for drilling
  376. Fluid sampling
  377. Fluid sampling safety hazards
  378. Fluid typing with NMR logging
  379. Foam behavior in porous media
  380. Foam properties
  381. Foamed cement
  382. Foams as blocking agents
  383. Foams as mobility control agents
  384. Foams for conformance improvement
  385. Focused gamma ray density logging
  386. Forecasting gas production
  387. Formation damage
  388. Formation damage from completion workover fluids
  389. Formation damage from condensate banking
  390. Formation damage from fines migration
  391. Formation damage from paraffins and asphaltenes
  392. Formation damage from perforating and cementing
  393. Formation damage from swelling clays
  394. Formation damage in injection wells
  395. Formation evaluation during mud logging
  396. Formation evaluation for acidizing
  397. Formation integrity test
  398. Formation resistivity determination
  399. Formation testing while drilling (FTWD)
  400. Fractional flow evaluation
  401. Fracture diagnostic techniques
  402. Fracture identification with acoustic logging
  403. Fracture mechanics
  404. Fracture propagation models
  405. Fracture statistical analysis and characterization
  406. Fracture treatment design
  407. Fracturing fluids and additives
  408. Fracturing high-permeability formations
  409. Frequency-wavelength relations for free space
  410. Functions of drilling fluid
  411. Fundamentals of gas for gas lift design
  412. Gamma ray logs
  413. Gas-Liquid Two-Phase Flow in Pipes
  414. Gas as fertilizer feedstock
  415. Gas blowout after abandonment
  416. Gas cap drive reservoirs
  417. Gas chromatography
  418. Gas condensate properties
  419. Gas facility
  420. Gas foam flooding
  421. Gas formation volume factor and density
  422. Gas hydrates in nature
  423. Gas in place and recoverable volumes
  424. Gas lift
  425. Gas lift equipment
  426. Gas lift equipment and facilities
  427. Gas lift for unusual environments
  428. Gas lift installation design
  429. Gas lift installation design methods
  430. Gas lift operations
  431. Gas lift system design
  432. Gas lift valve mechanics
  433. Gas meters
  434. Gas pipelines
  435. Gas properties
  436. Gas to liquids (GTL)
  437. Gas to methanol
  438. Gas to power
  439. Gas treating and processing
  440. Gas turbine engines
  441. Gas turbine meter
  442. Gas utilization options
  443. Gas viscosity
  444. Gas well deliverability
  445. Gas well performance
  446. Gassmann's equation for fluid substitution
  447. Gel breakers
  448. Gels for conformance improvement
  449. Generation of hydrocarbon accumulations
  450. Geochemical logs
  451. Geological applications of acoustic logging
  452. Geological influences on acoustic impedance
  453. Geology impact on immiscible gas displacement
  454. Geology in reservoir models
  455. Geomechanical analysis in real time
  456. Geomechanics in reservoir simulation
  457. Geophysics
  458. Geostatistical conditional simulation
  459. Geostatistical reservoir modeling
  460. Geostatistics
  461. Geothermal drilling and completion
  462. Geothermal energy
  463. Geothermal exploration
  464. Geothermal production measurement
  465. Geothermal reservoir characterization
  466. Geothermal reservoir engineering
  467. Ghawar
  468. Glossaries
  469. Graphalloy
  470. Gravel pack design
  471. Gravel pack equipment and tools
  472. Gravel placement techniques
  473. Gravity stable miscible gas injection in steeply dipping sandstone reservoir
  474. Green’s function for solving transient flow problems
  475. Gridding in reservoir simulation
  476. Guidelines for MMPs with different solvents
  477. Haft Kel field
  478. Handling uncertainty in geomechanical design
  479. Hawkins field
  480. Hazardous area classification for electrical systems
  481. Health, safety, and environment (HSE)
  482. Health, safety, and environment (HSE) hurt based safety approach
  483. Health, safety, and environment (HSE) risk-based standards
  484. Health, safety, and environment (HSE) treatment based safety approach
  485. Heating oil emulsions
  486. Heavy oil
  487. High performance computing and reservoir simulation
  488. History of coiled tubing technology
  489. History of gravel packs
  490. History of offshore drilling units
  491. History of produced water
  492. Hole cleaning
  493. Hole deviation
  494. Hole geometry
  495. Hole preparation in cementing
  496. Homogeneous Two-Phase Flow
  497. Horizontal well applications in steamflooding
  498. Horizontal wells
  499. Hot waterflooding
  500. How to Manage a Wiki Project

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)