You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Pages with the most categories

Jump to navigation Jump to search

Showing below up to 500 results in range #1 to #500.

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)

  1. Health, safety, and environment (HSE)‏‎ (22 categories)
  2. Health, safety, and environment (HSE) treatment based safety approach‏‎ (17 categories)
  3. Health, safety, and environment (HSE) hurt based safety approach‏‎ (16 categories)
  4. Health, safety, and environment (HSE) risk-based standards‏‎ (16 categories)
  5. Remediation of salt affected soils‏‎ (10 categories)
  6. Relative advantages and disadvantages of artificial lift systems‏‎ (8 categories)
  7. Production risers‏‎ (8 categories)
  8. Uncertainty analysis in creating production forecast‏‎ (8 categories)
  9. Empirical methods in production forecasting‏‎ (8 categories)
  10. Production forecasting expectations‏‎ (7 categories)
  11. Types of decline analysis in production forecasting‏‎ (7 categories)
  12. Micelle‏‎ (7 categories)
  13. Reservoir simulation applications‏‎ (7 categories)
  14. Aggregation of forecasts‏‎ (7 categories)
  15. Production forecasting flowchart‏‎ (7 categories)
  16. Commercial and economic assumptions in production forecasting‏‎ (7 categories)
  17. Automated well construction‏‎ (7 categories)
  18. Controllable verses non controllable forecast factors‏‎ (7 categories)
  19. Oceaneering international‏‎ (7 categories)
  20. Production forecasting frequently asked questions and examples‏‎ (7 categories)
  21. Integrated asset modelling in production forecasting‏‎ (7 categories)
  22. Reservoir simulation models in production forecasting‏‎ (7 categories)
  23. Transportation management systems‏‎ (7 categories)
  24. Reamers‏‎ (7 categories)
  25. Production forecasting in the financial markets‏‎ (7 categories)
  26. Using multiple methodologies in production forecasting‏‎ (7 categories)
  27. Pipeline safety and reliability‏‎ (7 categories)
  28. Production forecasting principles and definition‏‎ (7 categories)
  29. Discounting and risking in production forecasting‏‎ (7 categories)
  30. Long term verses short term production forecast‏‎ (7 categories)
  31. Challenging the current barriers to forecast improvement‏‎ (7 categories)
  32. Production forecasting purpose‏‎ (7 categories)
  33. Uncertainty range in production forecasting‏‎ (7 categories)
  34. Look backs and forecast verification‏‎ (7 categories)
  35. Production forecasting activity scheduling‏‎ (7 categories)
  36. Quality assurance in forecast‏‎ (7 categories)
  37. Production forecasting system constraints‏‎ (7 categories)
  38. Probabilistic verses deterministic in production forecasting‏‎ (7 categories)
  39. Production forecasting analog methods‏‎ (7 categories)
  40. Establishing input for production forecasting‏‎ (7 categories)
  41. Vehicle safety‏‎ (7 categories)
  42. Production forecasting building blocks‏‎ (7 categories)
  43. Material balance models in production forecasting‏‎ (7 categories)
  44. Production forecasting decline curve analysis‏‎ (7 categories)
  45. Documentation and reporting in production forecasting‏‎ (7 categories)
  46. Applications of nanotechnology‏‎ (6 categories)
  47. Dynamic data‏‎ (6 categories)
  48. Barite sag‏‎ (6 categories)
  49. Well integrity‏‎ (6 categories)
  50. PEH:Fundamentals of Geophysics‏‎ (6 categories)
  51. Ghawar‏‎ (6 categories)
  52. Well integrity lifecycle‏‎ (6 categories)
  53. Emissions from oil and gas production operations‏‎ (6 categories)
  54. Well integrity offshore‏‎ (6 categories)
  55. Well integrity onshore‏‎ (6 categories)
  56. Recognizing naturally fractured reservoirs‏‎ (6 categories)
  57. Well integrity sub sea‏‎ (6 categories)
  58. Well integrity thermal‏‎ (6 categories)
  59. Burgan‏‎ (6 categories)
  60. Levels of automation‏‎ (6 categories)
  61. Drilling waste management‏‎ (6 categories)
  62. Acid placement and coverage‏‎ (6 categories)
  63. Underbalanced drilling circulation designs‏‎ (6 categories)
  64. Petrophysical analysis case studies‏‎ (6 categories)
  65. Underbalanced drilling health and safety issues‏‎ (6 categories)
  66. Environment‏‎ (5 categories)
  67. PEH:Formation Damage‏‎ (5 categories)
  68. Designing an underbalanced drilling operation‏‎ (5 categories)
  69. Coiled tubing drilling‏‎ (5 categories)
  70. Dehydration with refrigeration and hydrate suppression‏‎ (5 categories)
  71. Facility operability‏‎ (5 categories)
  72. Directional deviation tools‏‎ (5 categories)
  73. Wilmington field‏‎ (5 categories)
  74. Data collection for well planning‏‎ (5 categories)
  75. Heavy oil‏‎ (5 categories)
  76. Roller cone bit design‏‎ (5 categories)
  77. CHOPS sand management‏‎ (5 categories)
  78. Design considerations and overall comparisons of artificial lift‏‎ (5 categories)
  79. Underbalanced drilling limitations‏‎ (4 categories)
  80. Well stimulation‏‎ (4 categories)
  81. PEH:Fluid Sampling‏‎ (4 categories)
  82. Kirkuk field‏‎ (4 categories)
  83. Hawkins field‏‎ (4 categories)
  84. Production logging tools‏‎ (4 categories)
  85. Prudhoe Bay field‏‎ (4 categories)
  86. Kriging and cokriging‏‎ (4 categories)
  87. Safety considerations during production logging‏‎ (4 categories)
  88. Geomechanics in reservoir simulation‏‎ (4 categories)
  89. Kuparuk River field‏‎ (4 categories)
  90. Formation integrity test‏‎ (4 categories)
  91. Acidizing safety and environmental protection‏‎ (4 categories)
  92. Relative permeability in shale gas‏‎ (4 categories)
  93. Hole cleaning‏‎ (4 categories)
  94. Bottom hole assembly (BHA) design for directional control‏‎ (4 categories)
  95. Gas in place and recoverable volumes‏‎ (4 categories)
  96. Drill bit hydraulics‏‎ (4 categories)
  97. Completing underbalanced wells‏‎ (4 categories)
  98. Producing crude oil from algae‏‎ (4 categories)
  99. Empire Abo field‏‎ (4 categories)
  100. Designing single well chemical tracer test for residual oil‏‎ (4 categories)
  101. Hole geometry‏‎ (4 categories)
  102. PEH:Well Production Problems‏‎ (4 categories)
  103. PEH:Emerging Drilling Technologies‏‎ (4 categories)
  104. West Texas carbonate fields‏‎ (4 categories)
  105. Coiled tubing fatigue‏‎ (4 categories)
  106. Prepacking perforations with gravel‏‎ (4 categories)
  107. Tight gas drilling and completion‏‎ (4 categories)
  108. Cold heavy oil production with sand‏‎ (4 categories)
  109. InSAR‏‎ (4 categories)
  110. Acquiring bottomhole pressure and temperature data‏‎ (4 categories)
  111. Downhole processing candidate screening‏‎ (4 categories)
  112. Formation damage from perforating and cementing‏‎ (4 categories)
  113. Collecting data while drilling‏‎ (4 categories)
  114. Recycling hydraulic fracturing wastewater‏‎ (4 categories)
  115. CHOPS reservoir assessment and candidate screening‏‎ (4 categories)
  116. Nanotechnology in hydrogen sulfide detection‏‎ (4 categories)
  117. Circulatability treatment in cementing‏‎ (4 categories)
  118. Sand control techniques‏‎ (4 categories)
  119. Haft Kel field‏‎ (4 categories)
  120. Cementing hardware‏‎ (4 categories)
  121. Gas condensate properties‏‎ (4 categories)
  122. PEH:Underbalanced Drilling‏‎ (3 categories)
  123. Reserves estimation of shale gas‏‎ (3 categories)
  124. PEH:Artificial Lift Systems‏‎ (3 categories)
  125. PEH:Hydrate Emerging Technologies‏‎ (3 categories)
  126. Seismic attributes‏‎ (3 categories)
  127. PEH:Phase Behavior of H2O Hydrocarbon Systems‏‎ (3 categories)
  128. PEH:Relative Permeability and Capillary Pressure‏‎ (3 categories)
  129. Drilling fluid environmental considerations‏‎ (3 categories)
  130. PEH:Drilling-Data Acquisition‏‎ (3 categories)
  131. PEH:Liquid and Gas Measurement‏‎ (3 categories)
  132. PEH:Single-Phase Permeability‏‎ (3 categories)
  133. Tracer testing in geothermal reservoirs‏‎ (3 categories)
  134. Dual gradient drilling systems‏‎ (3 categories)
  135. Remote well monitoring‏‎ (3 categories)
  136. Field performance of polymer waterflooding‏‎ (3 categories)
  137. PEH:Offshore and Subsea Facilities‏‎ (3 categories)
  138. PEH:Valuation of Oil and Gas Reserves‏‎ (3 categories)
  139. Types of gels used for conformance improvement‏‎ (3 categories)
  140. Ekofisk field‏‎ (3 categories)
  141. Matrix acidizing‏‎ (3 categories)
  142. PEH:Asphaltenes and Waxes‏‎ (3 categories)
  143. Cement hydration‏‎ (3 categories)
  144. PEH:Hydraulic Fracturing‏‎ (3 categories)
  145. Formation evaluation during mud logging‏‎ (3 categories)
  146. Seismic attributes for reservoir studies‏‎ (3 categories)
  147. PEH:Phase Diagrams‏‎ (3 categories)
  148. PEH:Reservoir Geology‏‎ (3 categories)
  149. Preventing formation of hydrate plugs‏‎ (3 categories)
  150. Drilling fluid tests‏‎ (3 categories)
  151. Well control with one-circulation method‏‎ (3 categories)
  152. Microbial exploration technology‏‎ (3 categories)
  153. PEH:Drilling Fluids‏‎ (3 categories)
  154. PEH:Mathematics of Fluid Flow‏‎ (3 categories)
  155. PEH:Specialized Well-Logging Topics‏‎ (3 categories)
  156. Geomechanical analysis in real time‏‎ (3 categories)
  157. History of offshore drilling units‏‎ (3 categories)
  158. Sucker-rod lift‏‎ (3 categories)
  159. Air drilling‏‎ (3 categories)
  160. Risk-based casing design‏‎ (3 categories)
  161. PEH:Oil Reservoir Primary Drive Mechanisms‏‎ (3 categories)
  162. PEH:Water-Treating Facilities in Oil and Gas Operations‏‎ (3 categories)
  163. Swanson River field‏‎ (3 categories)
  164. Mature fields‏‎ (3 categories)
  165. PEH:Casing Design‏‎ (3 categories)
  166. PEH:Hydraulic Pumping in Oil Wells‏‎ (3 categories)
  167. Formation evaluation for acidizing‏‎ (3 categories)
  168. Seismic data acquisition equipment‏‎ (3 categories)
  169. PEH:Piping and Pipelines‏‎ (3 categories)
  170. PEH:Reservoir Geophysics‏‎ (3 categories)
  171. Deepwater drilling‏‎ (3 categories)
  172. Drilling fluid types‏‎ (3 categories)
  173. Electromagnetic logging while drilling‏‎ (3 categories)
  174. Log analyses in tight gas reservoirs‏‎ (3 categories)
  175. CO2 sequestration‏‎ (3 categories)
  176. PEH:Drilling Problems and Solutions‏‎ (3 categories)
  177. Fluid mechanics for drilling‏‎ (3 categories)
  178. PEH:Mathematics of Transient Analysis‏‎ (3 categories)
  179. PEH:Subsea and Downhole Processing‏‎ (3 categories)
  180. Air emissions‏‎ (3 categories)
  181. Pseudo steady-state‏‎ (3 categories)
  182. Removing hydrocarbons from water‏‎ (3 categories)
  183. Risk analysis for the oil industry‏‎ (3 categories)
  184. PEH:Oil Storage‏‎ (3 categories)
  185. PEH:Waterflooding‏‎ (3 categories)
  186. Drill bit economics‏‎ (3 categories)
  187. Production forecasting glossary‏‎ (3 categories)
  188. PEH:Cementing‏‎ (3 categories)
  189. PEH:Immiscible Gas Injection in Oil Reservoirs‏‎ (3 categories)
  190. PEH:Plunger Lift‏‎ (3 categories)
  191. PEH:Reservoir Management Programs‏‎ (3 categories)
  192. Drilling fluids‏‎ (3 categories)
  193. Intellectual property‏‎ (3 categories)
  194. Extended reach wells‏‎ (3 categories)
  195. PEH:Electrical Submersible Pumps‏‎ (3 categories)
  196. PEH:Mathematics of Vibrating Systems‏‎ (3 categories)
  197. Geophysics‏‎ (3 categories)
  198. Downhole equipment for UBD operations‏‎ (3 categories)
  199. Hydraulic fracturing‏‎ (3 categories)
  200. Fixed platform rigs‏‎ (3 categories)
  201. PEH:Gas Lift‏‎ (3 categories)
  202. Coiled tubing applications‏‎ (3 categories)
  203. PEH:Oil System Correlations‏‎ (3 categories)
  204. PEH:Well-To-Well Tracer Tests‏‎ (3 categories)
  205. Predicting sand production‏‎ (3 categories)
  206. CBM well drilling and completion‏‎ (3 categories)
  207. Reservoir geophysics overview‏‎ (3 categories)
  208. PEH:Coalbed Methane‏‎ (3 categories)
  209. PEH:In-Situ Combustion‏‎ (3 categories)
  210. PEH:Polymers, Gels, Foams, and Resins‏‎ (3 categories)
  211. PEH:Reservoir Pressure and Temperature‏‎ (3 categories)
  212. Drilling induced formation damage‏‎ (3 categories)
  213. Logging while drilling (LWD)‏‎ (3 categories)
  214. External pressure loads on casing and tubing strings‏‎ (3 categories)
  215. PEH:Electrical Systems‏‎ (3 categories)
  216. PEH:Matrix Acidizing‏‎ (3 categories)
  217. Controlling precipitates due to acidizing‏‎ (3 categories)
  218. PEH:The 21st Century Energy Mix‏‎ (3 categories)
  219. Hydraulic fracturing in tight gas reservoirs‏‎ (3 categories)
  220. Water for hydraulic fracturing‏‎ (3 categories)
  221. Robotics‏‎ (3 categories)
  222. PEH:Gas Properties‏‎ (3 categories)
  223. Formation damage from completion workover fluids‏‎ (3 categories)
  224. Offshore decommissioning‏‎ (3 categories)
  225. PEH:Oil and Gas Processing‏‎ (3 categories)
  226. Cyber security‏‎ (3 categories)
  227. PEH:Well Control: Procedures and Principles‏‎ (3 categories)
  228. Waterflooding in carbonate reservoirs‏‎ (3 categories)
  229. PEH:Coiled-Tubing Well Intervention and Drilling Operations‏‎ (3 categories)
  230. PEH:Inflow and Outflow Performance‏‎ (3 categories)
  231. PEH:Prime Movers‏‎ (3 categories)
  232. PEH:Reservoir Simulation‏‎ (3 categories)
  233. Productivity index (J)‏‎ (3 categories)
  234. PEH:Electromagnetic Heating of Oil‏‎ (3 categories)
  235. PEH:Miscible Processes‏‎ (3 categories)
  236. PEH:The Single-Well Chemical Tracer Test - A Method For Measuring Reservoir Fluid Saturations In Situ‏‎ (3 categories)
  237. Managed pressure drilling‏‎ (3 categories)
  238. PEH:Gas Reservoirs‏‎ (3 categories)
  239. PEH:Oil and Gas Separators‏‎ (3 categories)
  240. Gas lift equipment‏‎ (3 categories)
  241. Drilling automation‏‎ (3 categories)
  242. Mechanical loads on casing and tubing strings‏‎ (3 categories)
  243. CHOPS operational and monitoring issues‏‎ (3 categories)
  244. PEH:Cold Heavy-Oil Production With Sand‏‎ (3 categories)
  245. PEH:Intelligent Well Completions‏‎ (3 categories)
  246. Fractional flow evaluation‏‎ (3 categories)
  247. PEH:Production Logging‏‎ (3 categories)
  248. PEH:Resistivity and SP Logging‏‎ (3 categories)
  249. Intermittent-flow gas lift‏‎ (3 categories)
  250. Resin treatment for conformance improvement‏‎ (3 categories)
  251. Sand control‏‎ (3 categories)
  252. PEH:Monetizing Stranded Gas‏‎ (3 categories)
  253. PEH:Thermal Recovery by Steam Injection‏‎ (3 categories)
  254. Geostatistics‏‎ (3 categories)
  255. Reserves estimation of coalbed methane‏‎ (3 categories)
  256. Casing design‏‎ (3 categories)
  257. PEH:Gas Treating and Processing‏‎ (3 categories)
  258. Formation damage from fines migration‏‎ (3 categories)
  259. PEH:Perforating‏‎ (3 categories)
  260. DNA fingerprinting for reservoir characterization‏‎ (3 categories)
  261. Drilling data management‏‎ (3 categories)
  262. Acid additives‏‎ (3 categories)
  263. PEH:Completion Systems‏‎ (3 categories)
  264. Roller cone bit classification‏‎ (3 categories)
  265. PEH:International Oil and Gas Law‏‎ (3 categories)
  266. PEH:Progressing Cavity Pumping Systems‏‎ (3 categories)
  267. PEH:Risk and Decision Analysis‏‎ (3 categories)
  268. PetroWiki Workgroup Test Page‏‎ (3 categories)
  269. Lost circulation‏‎ (3 categories)
  270. Biodegradation‏‎ (3 categories)
  271. PEH:Emulsion Treating‏‎ (3 categories)
  272. PEH:Mud Logging‏‎ (3 categories)
  273. PEH:Thermodynamics and Phase Behavior‏‎ (3 categories)
  274. PEH:Geologically Based, Geostatistical Reservoir Modeling‏‎ (3 categories)
  275. PEH:Petroleum Economics‏‎ (3 categories)
  276. PEH:Project Management of Surface Facilities‏‎ (3 categories)
  277. Gas treating and processing‏‎ (3 categories)
  278. Directional drilling‏‎ (3 categories)
  279. PEH:Compressors‏‎ (3 categories)
  280. PEH:Introduction to Roller-Cone and Polycrystalline Diamond Drill Bits‏‎ (3 categories)
  281. PEH:Rock Properties‏‎ (3 categories)
  282. Biological monitoring‏‎ (3 categories)
  283. Resource classification‏‎ (3 categories)
  284. PEH:Estimation of Primary Reserves of Crude Oil, Natural Gas, and Condensate‏‎ (3 categories)
  285. Sand control in intelligent wells‏‎ (3 categories)
  286. PEH:Nuclear Logging‏‎ (3 categories)
  287. PEH:Tight Gas Reservoirs‏‎ (3 categories)
  288. Geothermal energy‏‎ (3 categories)
  289. Horizontal wells‏‎ (3 categories)
  290. Application of risk and decision analysis‏‎ (3 categories)
  291. Casing inspection logs‏‎ (3 categories)
  292. PEH:Geomechanics Applied to Drilling Engineering‏‎ (3 categories)
  293. Security‏‎ (3 categories)
  294. PEH:Petrophysical Applications‏‎ (3 categories)
  295. PEH:Properties of Produced Water‏‎ (3 categories)
  296. Data driven approaches to production management‏‎ (3 categories)
  297. Directional survey‏‎ (3 categories)
  298. Pressure drop evaluation along pipelines‏‎ (3 categories)
  299. Well construction‏‎ (3 categories)
  300. Evaluating IOR potential with single well chemical tracer test‏‎ (3 categories)
  301. PEH:Crude Oil Emulsions‏‎ (3 categories)
  302. Fluid flow with formation damage‏‎ (3 categories)
  303. PEH:Introduction to Well Planning‏‎ (3 categories)
  304. PEH:Safety Systems‏‎ (3 categories)
  305. Drillpipe failures‏‎ (3 categories)
  306. Well planning‏‎ (3 categories)
  307. PEH:Fluid Flow Through Permeable Media‏‎ (3 categories)
  308. PEH:Nuclear Magnetic Resonance Applications in Petrophysics and Formation Evaluation‏‎ (3 categories)
  309. Gas chromatography‏‎ (3 categories)
  310. PEH:Tubing Selection, Design, and Installation‏‎ (3 categories)
  311. Human factors‏‎ (3 categories)
  312. Downhole processing overview‏‎ (3 categories)
  313. PEH:Acoustic Logging‏‎ (3 categories)
  314. Cement bond logs‏‎ (3 categories)
  315. PEH:Geothermal Engineering‏‎ (3 categories)
  316. PEH:Petrophysics‏‎ (3 categories)
  317. PEH:Pumps‏‎ (3 categories)
  318. Directional survey errors‏‎ (3 categories)
  319. Drilling fluid challenges‏‎ (3 categories)
  320. Acid treatment design‏‎ (3 categories)
  321. Production logging‏‎ (3 categories)
  322. Liquid meters‏‎ (3 categories)
  323. Evaluation of acid treatments‏‎ (3 categories)
  324. PEH:Directional Drilling‏‎ (3 categories)
  325. Rotary drill bits‏‎ (3 categories)
  326. PEH:Introduction to Wellhead Systems‏‎ (3 categories)
  327. PEH:Sand Control‏‎ (3 categories)
  328. Tracer flow in porous reservoir rock‏‎ (3 categories)
  329. Dry dessicant dehydration‏‎ (3 categories)
  330. Well preparation for gravel packing‏‎ (3 categories)
  331. PEH:Fluid Mechanics for Drilling‏‎ (3 categories)
  332. Classification and registration of offshore drilling units‏‎ (3 categories)
  333. Sandstone field with waterflood, gas and miscible solvent injection‏‎ (3 categories)
  334. PEH:Offshore Drilling Units‏‎ (3 categories)
  335. PCP systems for low productivity wells‏‎ (2 categories)
  336. Sour gas sweetening‏‎ (2 categories)
  337. Geothermal production measurement‏‎ (2 categories)
  338. Suspended solids in produced water‏‎ (2 categories)
  339. Downhole processing technology‏‎ (2 categories)
  340. AFE: rental equipment‏‎ (2 categories)
  341. Economics of treating emulsions‏‎ (2 categories)
  342. Kicks‏‎ (2 categories)
  343. Radioactive tracer logging‏‎ (2 categories)
  344. Water treating facilities‏‎ (2 categories)
  345. CBM economics‏‎ (2 categories)
  346. Flow equations for gas and multiphase flow‏‎ (2 categories)
  347. Multilateral completions‏‎ (2 categories)
  348. Cement composition and classification‏‎ (2 categories)
  349. Rock failure relationships‏‎ (2 categories)
  350. Formation damage in injection wells‏‎ (2 categories)
  351. Gas lift operations‏‎ (2 categories)
  352. Separator process control‏‎ (2 categories)
  353. Gas utilization options‏‎ (2 categories)
  354. Perforating design‏‎ (2 categories)
  355. Decision tree analysis‏‎ (2 categories)
  356. Handling uncertainty in geomechanical design‏‎ (2 categories)
  357. Plunger design considerations and selection‏‎ (2 categories)
  358. Directional survey for 3D reservoir modeling‏‎ (2 categories)
  359. Pressure transient testing‏‎ (2 categories)
  360. Tender assist drilling (TAD) units‏‎ (2 categories)
  361. Acidizing candidates‏‎ (2 categories)
  362. Production logging application tables‏‎ (2 categories)
  363. Liquified natural gas (LNG)‏‎ (2 categories)
  364. Authority for expenditures (AFE)‏‎ (2 categories)
  365. Well control stack for CT operations‏‎ (2 categories)
  366. Fluid identification and characterization‏‎ (2 categories)
  367. Cementing operations‏‎ (2 categories)
  368. Fracture treatment design‏‎ (2 categories)
  369. Single well chemical tracer test‏‎ (2 categories)
  370. Submersibles‏‎ (2 categories)
  371. History of gravel packs‏‎ (2 categories)
  372. Pore pressure prediction using seismic‏‎ (2 categories)
  373. Downhole CT tool connections‏‎ (2 categories)
  374. Produced water compressibility‏‎ (2 categories)
  375. Propping agents and fracture conductivity‏‎ (2 categories)
  376. Enriched hydrocarbon miscible flooding case studies‏‎ (2 categories)
  377. MODU riser and mooring systems‏‎ (2 categories)
  378. Borehole imaging‏‎ (2 categories)
  379. Models for wellbore stability‏‎ (2 categories)
  380. Carbonate reservoir with waterflood and miscible injection‏‎ (2 categories)
  381. Riserless interval‏‎ (2 categories)
  382. Coalbed methane‏‎ (2 categories)
  383. Gas facility‏‎ (2 categories)
  384. PCP sizing practices‏‎ (2 categories)
  385. PDC bit classification‏‎ (2 categories)
  386. Geothermal reservoir characterization‏‎ (2 categories)
  387. Predicting hydrate formation‏‎ (2 categories)
  388. Sustainability‏‎ (2 categories)
  389. Downhole sucker-rod pumps‏‎ (2 categories)
  390. Hydrogen sulfide‏‎ (2 categories)
  391. AFE: supervision and administration‏‎ (2 categories)
  392. Arctic well completions‏‎ (2 categories)
  393. Radioactive water tracers‏‎ (2 categories)
  394. Estimating mechanical properties with seismic‏‎ (2 categories)
  395. CBM production operations‏‎ (2 categories)
  396. Reserves estimation of thin oil columns‏‎ (2 categories)
  397. Flow through chokes‏‎ (2 categories)
  398. Multilateral wells‏‎ (2 categories)
  399. Rock mechanical properties‏‎ (2 categories)
  400. Oil demulsification‏‎ (2 categories)
  401. Separator sizing‏‎ (2 categories)
  402. Perforating equipment‏‎ (2 categories)
  403. Deep hard-rock drilling‏‎ (2 categories)
  404. Plunger lift‏‎ (2 categories)
  405. Directional survey instruments‏‎ (2 categories)
  406. Inlet‏‎ (2 categories)
  407. Acidizing horizontal wells‏‎ (2 categories)
  408. Unitized wellhead‏‎ (2 categories)
  409. Fluid identification logging in high angle wells‏‎ (2 categories)
  410. Centrifugal compressor‏‎ (2 categories)
  411. SI metric conversion factors‏‎ (2 categories)
  412. Fracturing fluids and additives‏‎ (2 categories)
  413. Oilfield water sampling‏‎ (2 categories)
  414. Compressive strength of rocks‏‎ (2 categories)
  415. Subsea completion systems‏‎ (2 categories)
  416. Downhole PC pump selection and sizing‏‎ (2 categories)
  417. Produced water density‏‎ (2 categories)
  418. Interpreting data collected during a single well chemical tracer test‏‎ (2 categories)
  419. Vibrating systems with multiple sources of motion‏‎ (2 categories)
  420. MODU selection‏‎ (2 categories)
  421. Borehole instability‏‎ (2 categories)
  422. Well to well tracer tests‏‎ (2 categories)
  423. Field tests of electromagnetic heating of oil‏‎ (2 categories)
  424. Modified isochronal tests for gas wells‏‎ (2 categories)
  425. Cased hole completions‏‎ (2 categories)
  426. Coalescers‏‎ (2 categories)
  427. Gas formation volume factor and density‏‎ (2 categories)
  428. PCP system components‏‎ (2 categories)
  429. Gas lift valve mechanics‏‎ (2 categories)
  430. PDC bit configurations‏‎ (2 categories)
  431. Spacers and flushers in cementing‏‎ (2 categories)
  432. Geothermal reservoir engineering‏‎ (2 categories)
  433. Pipe cutoff methods‏‎ (2 categories)
  434. Differential-pressure pipe sticking‏‎ (2 categories)
  435. Downhole tool communication‏‎ (2 categories)
  436. Ideal gases‏‎ (2 categories)
  437. AFE: support services‏‎ (2 categories)
  438. Types of logs‏‎ (2 categories)
  439. Elastic wellbore stress concentration‏‎ (2 categories)
  440. Real options analysis‏‎ (2 categories)
  441. CBM reservoir evaluation‏‎ (2 categories)
  442. Reserves estimation of tight gas reservoirs‏‎ (2 categories)
  443. Fluid capacitance logging‏‎ (2 categories)
  444. Cement slurry accelerators‏‎ (2 categories)
  445. Rock moduli boundary constraints‏‎ (2 categories)
  446. Oil demulsifier selection and optimization‏‎ (2 categories)
  447. Separator types‏‎ (2 categories)
  448. Perforating methods‏‎ (2 categories)
  449. Plunger lift applications‏‎ (2 categories)
  450. Directional well profile: overburden section‏‎ (2 categories)
  451. Primary cementing placement design‏‎ (2 categories)
  452. Thermal loads on casing and tubing strings‏‎ (2 categories)
  453. Acidizing preparations‏‎ (2 categories)
  454. Production logs to assess gas kick‏‎ (2 categories)
  455. Expandable tubulars‏‎ (2 categories)
  456. Fracturing high-permeability formations‏‎ (2 categories)
  457. Controlling excess water production‏‎ (2 categories)
  458. Slotted liners and wire wrapped screens‏‎ (2 categories)
  459. Designing 3D seismic surveys‏‎ (2 categories)
  460. History of produced water‏‎ (2 categories)
  461. Sucker-rod pumping units‏‎ (2 categories)
  462. Downhole PC pumps‏‎ (2 categories)
  463. Produced water formation volume factor‏‎ (2 categories)
  464. Dynamic wellbore pressure prediction‏‎ (2 categories)
  465. Interpreting data from well to well tracer tests‏‎ (2 categories)
  466. Vibration theory‏‎ (2 categories)
  467. MODU types‏‎ (2 categories)
  468. Borehole seismic applications‏‎ (2 categories)
  469. Wellbore flow performance‏‎ (2 categories)
  470. First law of thermodynamics‏‎ (2 categories)
  471. Casing-annulus-flow installation design‏‎ (2 categories)
  472. Forecasting gas production‏‎ (2 categories)
  473. Offshore Arctic operations‏‎ (2 categories)
  474. Coiled tubing‏‎ (2 categories)
  475. Sandstone reservoir with strong waterdrive and crestal gas injection‏‎ (2 categories)
  476. Gas hydrates in nature‏‎ (2 categories)
  477. PCP system design‏‎ (2 categories)
  478. PDC bit design‏‎ (2 categories)
  479. Cuttings analysis during mud logging‏‎ (2 categories)
  480. Spatial statistics‏‎ (2 categories)
  481. Differential calculus refresher‏‎ (2 categories)
  482. Predicting rock properties‏‎ (2 categories)
  483. Sweep pills in hole cleanup for cementing‏‎ (2 categories)
  484. AFE: transportation‏‎ (2 categories)
  485. Ultradeepwater drilling units‏‎ (2 categories)
  486. Elastomers‏‎ (2 categories)
  487. Artificial lift‏‎ (2 categories)
  488. CBM reservoir fundamentals‏‎ (2 categories)
  489. Cement slurry design‏‎ (2 categories)
  490. Rock strength from log parameters‏‎ (2 categories)
  491. Seismic interpretation‏‎ (2 categories)
  492. Service reel for CT unit‏‎ (2 categories)
  493. Dehydration with deliquescing dessicants‏‎ (2 categories)
  494. Plunger lift design and models‏‎ (2 categories)
  495. Directional well profile: reservoir penetration section‏‎ (2 categories)
  496. Use of ESPs in harsh environments‏‎ (2 categories)
  497. Elevated temperature applications of PCP‏‎ (2 categories)
  498. Basic elements of a reservoir characterization study‏‎ (2 categories)
  499. Microscopic efficiency of waterflooding‏‎ (2 categories)
  500. CT control and monitoring equipment‏‎ (2 categories)

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)