You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Pages with the most categories

Jump to navigation Jump to search

Showing below up to 250 results in range #1 to #250.

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

  1. Health, safety, and environment (HSE)‏‎ (22 categories)
  2. Health, safety, and environment (HSE) treatment based safety approach‏‎ (17 categories)
  3. Health, safety, and environment (HSE) hurt based safety approach‏‎ (16 categories)
  4. Health, safety, and environment (HSE) risk-based standards‏‎ (16 categories)
  5. Remediation of salt affected soils‏‎ (10 categories)
  6. Relative advantages and disadvantages of artificial lift systems‏‎ (8 categories)
  7. Production risers‏‎ (8 categories)
  8. Uncertainty analysis in creating production forecast‏‎ (8 categories)
  9. Empirical methods in production forecasting‏‎ (8 categories)
  10. Production forecasting expectations‏‎ (7 categories)
  11. Types of decline analysis in production forecasting‏‎ (7 categories)
  12. Micelle‏‎ (7 categories)
  13. Reservoir simulation applications‏‎ (7 categories)
  14. Aggregation of forecasts‏‎ (7 categories)
  15. Production forecasting flowchart‏‎ (7 categories)
  16. Commercial and economic assumptions in production forecasting‏‎ (7 categories)
  17. Automated well construction‏‎ (7 categories)
  18. Controllable verses non controllable forecast factors‏‎ (7 categories)
  19. Oceaneering international‏‎ (7 categories)
  20. Production forecasting frequently asked questions and examples‏‎ (7 categories)
  21. Integrated asset modelling in production forecasting‏‎ (7 categories)
  22. Reservoir simulation models in production forecasting‏‎ (7 categories)
  23. Transportation management systems‏‎ (7 categories)
  24. Reamers‏‎ (7 categories)
  25. Production forecasting in the financial markets‏‎ (7 categories)
  26. Using multiple methodologies in production forecasting‏‎ (7 categories)
  27. Pipeline safety and reliability‏‎ (7 categories)
  28. Production forecasting principles and definition‏‎ (7 categories)
  29. Discounting and risking in production forecasting‏‎ (7 categories)
  30. Long term verses short term production forecast‏‎ (7 categories)
  31. Challenging the current barriers to forecast improvement‏‎ (7 categories)
  32. Production forecasting purpose‏‎ (7 categories)
  33. Uncertainty range in production forecasting‏‎ (7 categories)
  34. Look backs and forecast verification‏‎ (7 categories)
  35. Production forecasting activity scheduling‏‎ (7 categories)
  36. Quality assurance in forecast‏‎ (7 categories)
  37. Production forecasting system constraints‏‎ (7 categories)
  38. Probabilistic verses deterministic in production forecasting‏‎ (7 categories)
  39. Production forecasting analog methods‏‎ (7 categories)
  40. Establishing input for production forecasting‏‎ (7 categories)
  41. Vehicle safety‏‎ (7 categories)
  42. Production forecasting building blocks‏‎ (7 categories)
  43. Material balance models in production forecasting‏‎ (7 categories)
  44. Production forecasting decline curve analysis‏‎ (7 categories)
  45. Documentation and reporting in production forecasting‏‎ (7 categories)
  46. Applications of nanotechnology‏‎ (6 categories)
  47. Dynamic data‏‎ (6 categories)
  48. Barite sag‏‎ (6 categories)
  49. Well integrity‏‎ (6 categories)
  50. PEH:Fundamentals of Geophysics‏‎ (6 categories)
  51. Ghawar‏‎ (6 categories)
  52. Well integrity lifecycle‏‎ (6 categories)
  53. Emissions from oil and gas production operations‏‎ (6 categories)
  54. Well integrity offshore‏‎ (6 categories)
  55. Well integrity onshore‏‎ (6 categories)
  56. Recognizing naturally fractured reservoirs‏‎ (6 categories)
  57. Well integrity sub sea‏‎ (6 categories)
  58. Well integrity thermal‏‎ (6 categories)
  59. Burgan‏‎ (6 categories)
  60. Levels of automation‏‎ (6 categories)
  61. Drilling waste management‏‎ (6 categories)
  62. Acid placement and coverage‏‎ (6 categories)
  63. Underbalanced drilling circulation designs‏‎ (6 categories)
  64. Petrophysical analysis case studies‏‎ (6 categories)
  65. Underbalanced drilling health and safety issues‏‎ (6 categories)
  66. Environment‏‎ (5 categories)
  67. PEH:Formation Damage‏‎ (5 categories)
  68. Designing an underbalanced drilling operation‏‎ (5 categories)
  69. Coiled tubing drilling‏‎ (5 categories)
  70. Dehydration with refrigeration and hydrate suppression‏‎ (5 categories)
  71. Facility operability‏‎ (5 categories)
  72. Directional deviation tools‏‎ (5 categories)
  73. Wilmington field‏‎ (5 categories)
  74. Data collection for well planning‏‎ (5 categories)
  75. Heavy oil‏‎ (5 categories)
  76. Roller cone bit design‏‎ (5 categories)
  77. CHOPS sand management‏‎ (5 categories)
  78. Design considerations and overall comparisons of artificial lift‏‎ (5 categories)
  79. Underbalanced drilling limitations‏‎ (4 categories)
  80. Well stimulation‏‎ (4 categories)
  81. PEH:Fluid Sampling‏‎ (4 categories)
  82. Kirkuk field‏‎ (4 categories)
  83. Hawkins field‏‎ (4 categories)
  84. Production logging tools‏‎ (4 categories)
  85. Prudhoe Bay field‏‎ (4 categories)
  86. Kriging and cokriging‏‎ (4 categories)
  87. Safety considerations during production logging‏‎ (4 categories)
  88. Geomechanics in reservoir simulation‏‎ (4 categories)
  89. Kuparuk River field‏‎ (4 categories)
  90. Formation integrity test‏‎ (4 categories)
  91. Acidizing safety and environmental protection‏‎ (4 categories)
  92. Relative permeability in shale gas‏‎ (4 categories)
  93. Hole cleaning‏‎ (4 categories)
  94. Bottom hole assembly (BHA) design for directional control‏‎ (4 categories)
  95. Gas in place and recoverable volumes‏‎ (4 categories)
  96. Drill bit hydraulics‏‎ (4 categories)
  97. Completing underbalanced wells‏‎ (4 categories)
  98. Producing crude oil from algae‏‎ (4 categories)
  99. Empire Abo field‏‎ (4 categories)
  100. Designing single well chemical tracer test for residual oil‏‎ (4 categories)
  101. Hole geometry‏‎ (4 categories)
  102. PEH:Well Production Problems‏‎ (4 categories)
  103. PEH:Emerging Drilling Technologies‏‎ (4 categories)
  104. West Texas carbonate fields‏‎ (4 categories)
  105. Coiled tubing fatigue‏‎ (4 categories)
  106. Prepacking perforations with gravel‏‎ (4 categories)
  107. Tight gas drilling and completion‏‎ (4 categories)
  108. Cold heavy oil production with sand‏‎ (4 categories)
  109. InSAR‏‎ (4 categories)
  110. Acquiring bottomhole pressure and temperature data‏‎ (4 categories)
  111. Downhole processing candidate screening‏‎ (4 categories)
  112. Formation damage from perforating and cementing‏‎ (4 categories)
  113. Collecting data while drilling‏‎ (4 categories)
  114. Recycling hydraulic fracturing wastewater‏‎ (4 categories)
  115. CHOPS reservoir assessment and candidate screening‏‎ (4 categories)
  116. Nanotechnology in hydrogen sulfide detection‏‎ (4 categories)
  117. Circulatability treatment in cementing‏‎ (4 categories)
  118. Sand control techniques‏‎ (4 categories)
  119. Haft Kel field‏‎ (4 categories)
  120. Cementing hardware‏‎ (4 categories)
  121. Gas condensate properties‏‎ (4 categories)
  122. PEH:Underbalanced Drilling‏‎ (3 categories)
  123. Reserves estimation of shale gas‏‎ (3 categories)
  124. PEH:Artificial Lift Systems‏‎ (3 categories)
  125. PEH:Hydrate Emerging Technologies‏‎ (3 categories)
  126. Seismic attributes‏‎ (3 categories)
  127. PEH:Phase Behavior of H2O Hydrocarbon Systems‏‎ (3 categories)
  128. PEH:Relative Permeability and Capillary Pressure‏‎ (3 categories)
  129. Drilling fluid environmental considerations‏‎ (3 categories)
  130. PEH:Drilling-Data Acquisition‏‎ (3 categories)
  131. PEH:Liquid and Gas Measurement‏‎ (3 categories)
  132. PEH:Single-Phase Permeability‏‎ (3 categories)
  133. Tracer testing in geothermal reservoirs‏‎ (3 categories)
  134. Dual gradient drilling systems‏‎ (3 categories)
  135. Remote well monitoring‏‎ (3 categories)
  136. Field performance of polymer waterflooding‏‎ (3 categories)
  137. PEH:Offshore and Subsea Facilities‏‎ (3 categories)
  138. PEH:Valuation of Oil and Gas Reserves‏‎ (3 categories)
  139. Types of gels used for conformance improvement‏‎ (3 categories)
  140. Ekofisk field‏‎ (3 categories)
  141. Matrix acidizing‏‎ (3 categories)
  142. PEH:Asphaltenes and Waxes‏‎ (3 categories)
  143. Cement hydration‏‎ (3 categories)
  144. PEH:Hydraulic Fracturing‏‎ (3 categories)
  145. Formation evaluation during mud logging‏‎ (3 categories)
  146. Seismic attributes for reservoir studies‏‎ (3 categories)
  147. PEH:Phase Diagrams‏‎ (3 categories)
  148. PEH:Reservoir Geology‏‎ (3 categories)
  149. Preventing formation of hydrate plugs‏‎ (3 categories)
  150. Drilling fluid tests‏‎ (3 categories)
  151. Well control with one-circulation method‏‎ (3 categories)
  152. Microbial exploration technology‏‎ (3 categories)
  153. PEH:Drilling Fluids‏‎ (3 categories)
  154. PEH:Mathematics of Fluid Flow‏‎ (3 categories)
  155. PEH:Specialized Well-Logging Topics‏‎ (3 categories)
  156. Geomechanical analysis in real time‏‎ (3 categories)
  157. History of offshore drilling units‏‎ (3 categories)
  158. Sucker-rod lift‏‎ (3 categories)
  159. Air drilling‏‎ (3 categories)
  160. Risk-based casing design‏‎ (3 categories)
  161. PEH:Oil Reservoir Primary Drive Mechanisms‏‎ (3 categories)
  162. PEH:Water-Treating Facilities in Oil and Gas Operations‏‎ (3 categories)
  163. Swanson River field‏‎ (3 categories)
  164. Mature fields‏‎ (3 categories)
  165. PEH:Casing Design‏‎ (3 categories)
  166. PEH:Hydraulic Pumping in Oil Wells‏‎ (3 categories)
  167. Formation evaluation for acidizing‏‎ (3 categories)
  168. Seismic data acquisition equipment‏‎ (3 categories)
  169. PEH:Piping and Pipelines‏‎ (3 categories)
  170. PEH:Reservoir Geophysics‏‎ (3 categories)
  171. Deepwater drilling‏‎ (3 categories)
  172. Drilling fluid types‏‎ (3 categories)
  173. Electromagnetic logging while drilling‏‎ (3 categories)
  174. Log analyses in tight gas reservoirs‏‎ (3 categories)
  175. CO2 sequestration‏‎ (3 categories)
  176. PEH:Drilling Problems and Solutions‏‎ (3 categories)
  177. Fluid mechanics for drilling‏‎ (3 categories)
  178. PEH:Mathematics of Transient Analysis‏‎ (3 categories)
  179. PEH:Subsea and Downhole Processing‏‎ (3 categories)
  180. Air emissions‏‎ (3 categories)
  181. Pseudo steady-state‏‎ (3 categories)
  182. Removing hydrocarbons from water‏‎ (3 categories)
  183. Risk analysis for the oil industry‏‎ (3 categories)
  184. PEH:Oil Storage‏‎ (3 categories)
  185. PEH:Waterflooding‏‎ (3 categories)
  186. Drill bit economics‏‎ (3 categories)
  187. Production forecasting glossary‏‎ (3 categories)
  188. PEH:Cementing‏‎ (3 categories)
  189. PEH:Immiscible Gas Injection in Oil Reservoirs‏‎ (3 categories)
  190. PEH:Plunger Lift‏‎ (3 categories)
  191. PEH:Reservoir Management Programs‏‎ (3 categories)
  192. Drilling fluids‏‎ (3 categories)
  193. Intellectual property‏‎ (3 categories)
  194. Extended reach wells‏‎ (3 categories)
  195. PEH:Electrical Submersible Pumps‏‎ (3 categories)
  196. PEH:Mathematics of Vibrating Systems‏‎ (3 categories)
  197. Geophysics‏‎ (3 categories)
  198. Downhole equipment for UBD operations‏‎ (3 categories)
  199. Hydraulic fracturing‏‎ (3 categories)
  200. Fixed platform rigs‏‎ (3 categories)
  201. PEH:Gas Lift‏‎ (3 categories)
  202. Coiled tubing applications‏‎ (3 categories)
  203. PEH:Oil System Correlations‏‎ (3 categories)
  204. PEH:Well-To-Well Tracer Tests‏‎ (3 categories)
  205. Predicting sand production‏‎ (3 categories)
  206. CBM well drilling and completion‏‎ (3 categories)
  207. Reservoir geophysics overview‏‎ (3 categories)
  208. PEH:Coalbed Methane‏‎ (3 categories)
  209. PEH:In-Situ Combustion‏‎ (3 categories)
  210. PEH:Polymers, Gels, Foams, and Resins‏‎ (3 categories)
  211. PEH:Reservoir Pressure and Temperature‏‎ (3 categories)
  212. Drilling induced formation damage‏‎ (3 categories)
  213. Logging while drilling (LWD)‏‎ (3 categories)
  214. External pressure loads on casing and tubing strings‏‎ (3 categories)
  215. PEH:Electrical Systems‏‎ (3 categories)
  216. PEH:Matrix Acidizing‏‎ (3 categories)
  217. Controlling precipitates due to acidizing‏‎ (3 categories)
  218. PEH:The 21st Century Energy Mix‏‎ (3 categories)
  219. Hydraulic fracturing in tight gas reservoirs‏‎ (3 categories)
  220. Water for hydraulic fracturing‏‎ (3 categories)
  221. Robotics‏‎ (3 categories)
  222. PEH:Gas Properties‏‎ (3 categories)
  223. Formation damage from completion workover fluids‏‎ (3 categories)
  224. Offshore decommissioning‏‎ (3 categories)
  225. PEH:Oil and Gas Processing‏‎ (3 categories)
  226. Cyber security‏‎ (3 categories)
  227. PEH:Well Control: Procedures and Principles‏‎ (3 categories)
  228. Waterflooding in carbonate reservoirs‏‎ (3 categories)
  229. PEH:Coiled-Tubing Well Intervention and Drilling Operations‏‎ (3 categories)
  230. PEH:Inflow and Outflow Performance‏‎ (3 categories)
  231. PEH:Prime Movers‏‎ (3 categories)
  232. PEH:Reservoir Simulation‏‎ (3 categories)
  233. Productivity index (J)‏‎ (3 categories)
  234. PEH:Electromagnetic Heating of Oil‏‎ (3 categories)
  235. PEH:Miscible Processes‏‎ (3 categories)
  236. PEH:The Single-Well Chemical Tracer Test - A Method For Measuring Reservoir Fluid Saturations In Situ‏‎ (3 categories)
  237. Managed pressure drilling‏‎ (3 categories)
  238. PEH:Gas Reservoirs‏‎ (3 categories)
  239. PEH:Oil and Gas Separators‏‎ (3 categories)
  240. Gas lift equipment‏‎ (3 categories)
  241. Drilling automation‏‎ (3 categories)
  242. Mechanical loads on casing and tubing strings‏‎ (3 categories)
  243. CHOPS operational and monitoring issues‏‎ (3 categories)
  244. PEH:Cold Heavy-Oil Production With Sand‏‎ (3 categories)
  245. PEH:Intelligent Well Completions‏‎ (3 categories)
  246. Fractional flow evaluation‏‎ (3 categories)
  247. PEH:Production Logging‏‎ (3 categories)
  248. PEH:Resistivity and SP Logging‏‎ (3 categories)
  249. Intermittent-flow gas lift‏‎ (3 categories)
  250. Resin treatment for conformance improvement‏‎ (3 categories)

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)