You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Pages with the fewest revisions

Jump to navigation Jump to search

Showing below up to 250 results in range #1 to #250.

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

  1. Unfocused gamma ray density logging‏‎ (1 revision)
  2. Perforation‏‎ (1 revision)
  3. Equilibrium of water and hydrocarbon systems with hydrates‏‎ (1 revision)
  4. Multiphase pumping‏‎ (1 revision)
  5. Basic symbols in alphabetical order‏‎ (1 revision)
  6. Hydrogen sulfide (H2S) fields‏‎ (1 revision)
  7. Approximate conversion factors‏‎ (1 revision)
  8. Subscript symbols in alphabetical order‏‎ (1 revision)
  9. Gas-Liquid Two-Phase Flow in Pipes‏‎ (1 revision)
  10. Health, safety, and environment (HSE)‏‎ (1 revision)
  11. "internal diameter"‏‎ (1 revision)
  12. Conversion factors for the vara‏‎ (1 revision)
  13. Water-treating facilities in oil and gas operation‏‎ (1 revision)
  14. RFID‏‎ (1 revision)
  15. Production forecasting process‏‎ (1 revision)
  16. Operations Excellence‏‎ (1 revision)
  17. SPE symbols standard‏‎ (1 revision)
  18. OR&A‏‎ (1 revision)
  19. Biological process for wastewater treatment‏‎ (1 revision)
  20. API Standard ANSI/API RP 10B-2 1ST ED (E1)‏‎ (1 revision)
  21. D-factor‏‎ (1 revision)
  22. 4.11 Fundamental research in projects, facilities, and construction‏‎ (1 revision)
  23. Economics symbols in alphabetical order‏‎ (1 revision)
  24. Multiphase flow‏‎ (1 revision)
  25. Biological processes for wastewater treatment‏‎ (1 revision)
  26. Fluid flow in porous media‏‎ (1 revision)
  27. Burgan‏‎ (2 revisions)
  28. Floating roof tanks‏‎ (2 revisions)
  29. Positive displacement liquid meters‏‎ (2 revisions)
  30. Site considerations for production tanks‏‎ (2 revisions)
  31. Field applications of resin for conformance improvement‏‎ (2 revisions)
  32. Predicting behavior of in-situ combustion‏‎ (2 revisions)
  33. Fluid flow in horizontal wells‏‎ (2 revisions)
  34. Residual gas saturation testing‏‎ (2 revisions)
  35. Fixed steel and concrete gravity base structures‏‎ (2 revisions)
  36. Diverting spinner flowmeter‏‎ (2 revisions)
  37. Residual oil evaluation using single well chemical tracer test‏‎ (2 revisions)
  38. Gas to liquids (GTL)‏‎ (2 revisions)
  39. Siliciclastic reservoir geology‏‎ (2 revisions)
  40. Low shear valve‏‎ (2 revisions)
  41. Phase diagrams for reservoir fluid systems‏‎ (2 revisions)
  42. Real gases‏‎ (2 revisions)
  43. Edit‏‎ (2 revisions)
  44. Oil storage‏‎ (2 revisions)
  45. Phase behavior of pure fluids‏‎ (2 revisions)
  46. Design of uncertainty models‏‎ (2 revisions)
  47. Ternary phase diagrams‏‎ (2 revisions)
  48. Piping and pipeline systems‏‎ (2 revisions)
  49. Solving unsteady flow problems with Green's and source functions‏‎ (2 revisions)
  50. Gas pipelines‏‎ (2 revisions)
  51. Macroscopic displacement efficiency of a linear waterflood‏‎ (2 revisions)
  52. Second law of thermodynamics‏‎ (2 revisions)
  53. Asphaltene deposition and plugging‏‎ (2 revisions)
  54. Estimating permeability based on Kozeny-Carman equation‏‎ (2 revisions)
  55. Vapor pressure‏‎ (2 revisions)
  56. Reservoir simulation linear equation solver‏‎ (2 revisions)
  57. Gas as fertilizer feedstock‏‎ (2 revisions)
  58. Drilling fluid challenges‏‎ (2 revisions)
  59. Placement of conformance improvement gels‏‎ (2 revisions)
  60. Compaction drive reservoirs‏‎ (2 revisions)
  61. Pressure transducer technology‏‎ (2 revisions)
  62. Assessing reservoir management‏‎ (2 revisions)
  63. Nitrogen miscible flooding case studies‏‎ (2 revisions)
  64. Estimating horizontal well productivity‏‎ (2 revisions)
  65. Stability of oil emulsions‏‎ (2 revisions)
  66. Immiscible gas injection in oil reservoirs‏‎ (2 revisions)
  67. Layer thickness evaluation‏‎ (2 revisions)
  68. Low permeability sandstone waterflood‏‎ (2 revisions)
  69. Project execution of surface facilities‏‎ (2 revisions)
  70. Swanson River field‏‎ (2 revisions)
  71. Connate water saturation evaluation‏‎ (2 revisions)
  72. Sandstone field with waterflood, gas and miscible solvent injection‏‎ (2 revisions)
  73. Reservoir simulation applications‏‎ (2 revisions)
  74. Fluid flow in PCP systems‏‎ (2 revisions)
  75. Sandstone reservoir with combination drives and injection‏‎ (2 revisions)
  76. Sandstone reservoir with strong waterdrive and crestal gas injection‏‎ (2 revisions)
  77. Gas well deliverability‏‎ (2 revisions)
  78. Thermodynamics and phase behavior‏‎ (2 revisions)
  79. Glossaries‏‎ (2 revisions)
  80. Borehole gravimetry‏‎ (2 revisions)
  81. Haft Kel field‏‎ (2 revisions)
  82. Polymer impact on permeability‏‎ (2 revisions)
  83. Gravity stable miscible gas injection in steeply dipping sandstone reservoir‏‎ (2 revisions)
  84. Solution gas driven sandstone reservoir with water and gas injection‏‎ (2 revisions)
  85. Subsea systems‏‎ (2 revisions)
  86. Chamber lift‏‎ (2 revisions)
  87. Equilibrium of water and hydrocarbon systems without hydrates‏‎ (2 revisions)
  88. Nodal analysis‏‎ (2 revisions)
  89. Immiscible gas injection case studies‏‎ (2 revisions)
  90. Subsea processing technology‏‎ (2 revisions)
  91. Steam delivery systems for EOR‏‎ (2 revisions)
  92. Gel breakers‏‎ (2 revisions)
  93. Short circuit‏‎ (2 revisions)
  94. Phase behavior in reservoir simulation‏‎ (2 revisions)
  95. Low shear pumps‏‎ (2 revisions)
  96. Single phase permeability‏‎ (2 revisions)
  97. DTSG Past Events‏‎ (2 revisions)
  98. Homogeneous Two-Phase Flow‏‎ (2 revisions)
  99. Single-point tests for gas wells‏‎ (2 revisions)
  100. Isochronal tests for gas wells‏‎ (2 revisions)
  101. Horizontal well applications in steamflooding‏‎ (2 revisions)
  102. Heating oil emulsions‏‎ (2 revisions)
  103. Symbols in alphabetical order‏‎ (2 revisions)
  104. Fixed roof tanks‏‎ (2 revisions)
  105. Displacement efficiency of immiscible gas injection‏‎ (2 revisions)
  106. Acoustic anisotropy in rock formation‏‎ (2 revisions)
  107. Oil fluid characteristics‏‎ (2 revisions)
  108. Phase characterization of in-situ fluids‏‎ (2 revisions)
  109. Interfacial tension‏‎ (2 revisions)
  110. Gas cap drive reservoirs‏‎ (2 revisions)
  111. Conformance improvement gel treatment design‏‎ (2 revisions)
  112. Vent system design for storage tanks‏‎ (2 revisions)
  113. Geothermal reservoir characterization‏‎ (2 revisions)
  114. Drilling safety‏‎ (2 revisions)
  115. Conformance problems‏‎ (2 revisions)
  116. Tank battery‏‎ (2 revisions)
  117. Kirkuk field‏‎ (2 revisions)
  118. Solution gas drive reservoirs‏‎ (2 revisions)
  119. Hydrate plug removal‏‎ (2 revisions)
  120. Oilfield water compressibility‏‎ (2 revisions)
  121. Field applications of conformance improvement foams‏‎ (2 revisions)
  122. Controlling liquid leaks from tanks‏‎ (2 revisions)
  123. Steamflood heat management‏‎ (2 revisions)
  124. Gas viscosity‏‎ (2 revisions)
  125. Phase diagrams for EOR processes‏‎ (2 revisions)
  126. Isothermal compressibility of gases‏‎ (2 revisions)
  127. Hydrostatic testing‏‎ (2 revisions)
  128. Oil viscosity‏‎ (2 revisions)
  129. Binary phase diagrams‏‎ (2 revisions)
  130. Operating practices for in-situ combustion‏‎ (2 revisions)
  131. Quaternary phase diagrams‏‎ (2 revisions)
  132. Lithology and rock type determination‏‎ (2 revisions)
  133. Foam behavior in porous media‏‎ (2 revisions)
  134. Conformance improvement‏‎ (2 revisions)
  135. Moderator‏‎ (2 revisions)
  136. Surface casing vent flow (SCVF)‏‎ (2 revisions)
  137. Areal displacement in a waterflood‏‎ (2 revisions)
  138. Stranded gas‏‎ (2 revisions)
  139. Sandstone reservoir with polymer injection‏‎ (2 revisions)
  140. Miscible flooding‏‎ (2 revisions)
  141. Transporting stranded gas as hydrates‏‎ (2 revisions)
  142. Gas to methanol‏‎ (2 revisions)
  143. Subsea processing overview‏‎ (2 revisions)
  144. Estimating permeability based on surface area and water saturation‏‎ (2 revisions)
  145. Temperature sensors‏‎ (2 revisions)
  146. CO2 miscible flooding case studies‏‎ (2 revisions)
  147. Phase behavior of water and hydrocarbon systems‏‎ (2 revisions)
  148. High performance computing and reservoir simulation‏‎ (2 revisions)
  149. Subsea processing benefits‏‎ (2 revisions)
  150. Differential calculus refresher‏‎ (2 revisions)
  151. Profiling oil production under WAG recovery‏‎ (2 revisions)
  152. Isothermal compressibility of oil‏‎ (2 revisions)
  153. Petroleum engineering history‏‎ (2 revisions)
  154. Fluid flow in hydraulically fractured wells‏‎ (2 revisions)
  155. Carbonate reservoir with waterflood and miscible injection‏‎ (2 revisions)
  156. Pipeline design consideration and standards‏‎ (2 revisions)
  157. Field performance of polymer waterflooding‏‎ (2 revisions)
  158. Well log interpretation‏‎ (2 revisions)
  159. Subsea processing design‏‎ (2 revisions)
  160. Immiscible gas injection monitoring‏‎ (2 revisions)
  161. Formation damage from paraffins and asphaltenes‏‎ (2 revisions)
  162. Oil smearing‏‎ (2 revisions)
  163. Utica shale‏‎ (2 revisions)
  164. Upscaling of grid properties in reservoir simulation‏‎ (2 revisions)
  165. Thermodynamic models for asphaltene precipitation‏‎ (2 revisions)
  166. Acoustic velocity dispersion and attenuation‏‎ (2 revisions)
  167. Comparison of permeability estimation models‏‎ (2 revisions)
  168. ISO/TC 67‏‎ (2 revisions)
  169. Disproportionate permeability reduction‏‎ (2 revisions)
  170. Flare and vent disposal systems‏‎ (2 revisions)
  171. Sand‏‎ (2 revisions)
  172. Marcellus shale‏‎ (2 revisions)
  173. Tank breathing‏‎ (2 revisions)
  174. Equations of state‏‎ (2 revisions)
  175. Foams as blocking agents‏‎ (2 revisions)
  176. Reservoir pressure data interpretation‏‎ (2 revisions)
  177. Numerical methods analysis of fluid flow‏‎ (2 revisions)
  178. Challenges with probabilistic models‏‎ (2 revisions)
  179. Vertical or gravity drainage gas displacement‏‎ (2 revisions)
  180. Subsea separation‏‎ (2 revisions)
  181. Streamline simulation‏‎ (2 revisions)
  182. Predicting performance of in-situ combustion‏‎ (2 revisions)
  183. Material balance in waterdrive reservoirs‏‎ (2 revisions)
  184. Phase behavior of mixtures‏‎ (2 revisions)
  185. Boundary effects in diagnostic plots‏‎ (2 revisions)
  186. Gas properties‏‎ (2 revisions)
  187. Oil formation volume factor‏‎ (2 revisions)
  188. Remotely operated vehicles (ROVs)‏‎ (2 revisions)
  189. Microscopic efficiency of waterflooding‏‎ (2 revisions)
  190. Gels for conformance improvement‏‎ (2 revisions)
  191. First law of thermodynamics‏‎ (2 revisions)
  192. Operations Readiness‏‎ (2 revisions)
  193. Bifuel‏‎ (2 revisions)
  194. Hawkins field‏‎ (2 revisions)
  195. Thermodynamic models for wax precipitation‏‎ (2 revisions)
  196. Ultrasonic gas meters‏‎ (2 revisions)
  197. Foam properties‏‎ (2 revisions)
  198. Wax precipitation‏‎ (3 revisions)
  199. Electrical distribution systems‏‎ (3 revisions)
  200. Gas formation volume factor and density‏‎ (3 revisions)
  201. Geophysics‏‎ (3 revisions)
  202. Decision tree analysis‏‎ (3 revisions)
  203. Crude oil characterization‏‎ (3 revisions)
  204. Safety systems‏‎ (3 revisions)
  205. History of offshore drilling units‏‎ (3 revisions)
  206. Well planning‏‎ (3 revisions)
  207. CT control and monitoring equipment‏‎ (3 revisions)
  208. Statistical concepts in risk analysis‏‎ (3 revisions)
  209. MODU riser and mooring systems‏‎ (3 revisions)
  210. Overpressure prediction using acoustic logging‏‎ (3 revisions)
  211. Prudhoe Bay field‏‎ (3 revisions)
  212. Fluid sampling‏‎ (3 revisions)
  213. Quality control during reservoir fluid sampling‏‎ (3 revisions)
  214. AFE: wellhead equipment‏‎ (3 revisions)
  215. Gas to power‏‎ (3 revisions)
  216. Basic vibration analysis‏‎ (3 revisions)
  217. AFE: transportation‏‎ (3 revisions)
  218. Cased hole completions‏‎ (3 revisions)
  219. Geochemical logs‏‎ (3 revisions)
  220. PEH:Artificial Lift Systems‏‎ (3 revisions)
  221. LWD induction tools‏‎ (3 revisions)
  222. Directional survey‏‎ (3 revisions)
  223. PEH:Rock Properties‏‎ (3 revisions)
  224. External pressure loads on casing and tubing strings‏‎ (3 revisions)
  225. Jackups‏‎ (3 revisions)
  226. Neutron porosity logs‏‎ (3 revisions)
  227. Mechanical loads on casing and tubing strings‏‎ (3 revisions)
  228. Prime mover for CT unit‏‎ (3 revisions)
  229. Surface data sensors during drilling‏‎ (3 revisions)
  230. Underbalanced drilling health and safety issues‏‎ (3 revisions)
  231. Estimating average reservoir pressure from diagnostic plots‏‎ (3 revisions)
  232. Prime movers‏‎ (3 revisions)
  233. Hydrate problems in production‏‎ (3 revisions)
  234. Ultradeepwater drilling units‏‎ (3 revisions)
  235. Evaluation of conformance improvement gels‏‎ (3 revisions)
  236. AFE: support services‏‎ (3 revisions)
  237. Log analysis in shaly formations‏‎ (3 revisions)
  238. Coiled tubing equipment design‏‎ (3 revisions)
  239. Carbonate reservoir geology‏‎ (3 revisions)
  240. PEH:Mathematics of Vibrating Systems‏‎ (3 revisions)
  241. Dehydration with deliquescing dessicants‏‎ (3 revisions)
  242. Polymers for conformance improvement‏‎ (3 revisions)
  243. Nuclear log interpretation‏‎ (3 revisions)
  244. Geostatistics‏‎ (3 revisions)
  245. CBM reservoir evaluation‏‎ (3 revisions)
  246. AFE: drilling rig and tools‏‎ (3 revisions)
  247. Oilfield water sampling‏‎ (3 revisions)
  248. Sand control in intelligent wells‏‎ (3 revisions)
  249. Predicting rock properties‏‎ (3 revisions)
  250. Compressional and shear velocities‏‎ (3 revisions)

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)