You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Oldest pages

Jump to navigation Jump to search

Showing below up to 500 results in range #1 to #500.

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)

  1. Subscript symbols in alphabetical order‏‎ (13:35, 19 September 2012)
  2. Economics symbols in alphabetical order‏‎ (13:38, 19 September 2012)
  3. Basic symbols in alphabetical order‏‎ (14:46, 19 September 2012)
  4. Unfocused gamma ray density logging‏‎ (10:59, 19 July 2013)
  5. SPE symbols standard‏‎ (14:19, 12 September 2013)
  6. Conversion factors for the vara‏‎ (14:23, 12 September 2013)
  7. Approximate conversion factors‏‎ (14:34, 12 September 2013)
  8. Equilibrium of water and hydrocarbon systems with hydrates‏‎ (14:23, 14 September 2013)
  9. Geological influences on acoustic impedance‏‎ (10:43, 24 July 2014)
  10. Frequency-wavelength relations for free space‏‎ (10:39, 14 August 2014)
  11. Guidelines for MMPs with different solvents‏‎ (12:14, 18 August 2014)
  12. Sand‏‎ (10:14, 20 August 2014)
  13. Dry gas reservoirs‏‎ (13:08, 17 September 2014)
  14. Stability of oil emulsions‏‎ (12:30, 22 October 2014)
  15. Hydrostatic testing‏‎ (09:25, 6 January 2015)
  16. Ghawar‏‎ (13:09, 12 January 2015)
  17. Burgan‏‎ (13:10, 12 January 2015)
  18. Glossaries‏‎ (11:50, 13 January 2015)
  19. Perforation‏‎ (12:11, 2 February 2015)
  20. Champion page‏‎ (12:09, 3 February 2015)
  21. Conformance improvement gel treatment design‏‎ (15:28, 11 February 2015)
  22. Hydrogen sulfide (H2S) fields‏‎ (15:04, 18 February 2015)
  23. Basins and fields‏‎ (16:08, 18 February 2015)
  24. Actuator‏‎ (16:50, 24 February 2015)
  25. SPE Bookstore‏‎ (14:46, 23 March 2015)
  26. RFID‏‎ (12:09, 21 April 2015)
  27. Liquid mud plant barge‏‎ (09:57, 15 May 2015)
  28. Autonomous vehicles‏‎ (00:28, 27 May 2015)
  29. Virtual flowmeters‏‎ (13:35, 1 June 2015)
  30. Alternating current motors‏‎ (18:33, 1 June 2015)
  31. Gas turbine engines‏‎ (18:34, 1 June 2015)
  32. Motor enclosures‏‎ (18:36, 1 June 2015)
  33. Prime mover for CT unit‏‎ (18:42, 1 June 2015)
  34. Prime movers‏‎ (18:43, 1 June 2015)
  35. Pump drivers‏‎ (18:43, 1 June 2015)
  36. Reciprocating engines‏‎ (18:44, 1 June 2015)
  37. Induction motors‏‎ (18:44, 1 June 2015)
  38. Inference liquid meters‏‎ (18:44, 1 June 2015)
  39. Rotary positive displacement compressors‏‎ (18:45, 1 June 2015)
  40. Centrifugal compressor‏‎ (18:45, 1 June 2015)
  41. Reciprocating compressor‏‎ (18:46, 1 June 2015)
  42. Compressors‏‎ (18:46, 1 June 2015)
  43. Power factor and capacitors‏‎ (18:57, 1 June 2015)
  44. Hazardous area classification for electrical systems‏‎ (19:03, 1 June 2015)
  45. Electrical systems‏‎ (19:40, 1 June 2015)
  46. Electrical grounding‏‎ (19:41, 1 June 2015)
  47. Electrical distribution systems‏‎ (19:44, 1 June 2015)
  48. NEMA motor characteristics‏‎ (20:12, 1 June 2015)
  49. Motor specifications‏‎ (20:13, 1 June 2015)
  50. Gas turbine meter‏‎ (20:15, 1 June 2015)
  51. Vent system design for storage tanks‏‎ (06:56, 2 June 2015)
  52. Tank breathing‏‎ (06:56, 2 June 2015)
  53. Tank battery‏‎ (06:57, 2 June 2015)
  54. Site considerations for production tanks‏‎ (06:57, 2 June 2015)
  55. Floating roof tanks‏‎ (06:57, 2 June 2015)
  56. Fixed roof tanks‏‎ (06:57, 2 June 2015)
  57. Microwave-processed metals‏‎ (07:23, 2 June 2015)
  58. Resin composites‏‎ (07:24, 2 June 2015)
  59. Gas pipelines‏‎ (07:33, 2 June 2015)
  60. Piping and pipeline systems‏‎ (07:34, 2 June 2015)
  61. Pipelines‏‎ (07:52, 2 June 2015)
  62. Pipeline design consideration and standards‏‎ (08:09, 2 June 2015)
  63. Controlling liquid leaks from tanks‏‎ (08:11, 2 June 2015)
  64. Drilling fluid types‏‎ (08:52, 2 June 2015)
  65. Gas hydrates in nature‏‎ (09:07, 2 June 2015)
  66. Equilibrium of water and hydrocarbon systems without hydrates‏‎ (09:13, 2 June 2015)
  67. Hydrate plug removal‏‎ (09:21, 2 June 2015)
  68. Transporting stranded gas as hydrates‏‎ (09:38, 2 June 2015)
  69. Asphaltene deposition and plugging‏‎ (09:51, 2 June 2015)
  70. Formation damage from paraffins and asphaltenes‏‎ (10:36, 2 June 2015)
  71. Thermodynamic models for asphaltene precipitation‏‎ (11:01, 2 June 2015)
  72. Orifice gas meters‏‎ (11:37, 2 June 2015)
  73. Positive displacement liquid meters‏‎ (11:38, 2 June 2015)
  74. Pressure transducer technology‏‎ (11:41, 2 June 2015)
  75. Temperature sensors‏‎ (11:41, 2 June 2015)
  76. Ultrasonic gas meters‏‎ (11:47, 2 June 2015)
  77. Binary phase diagrams‏‎ (11:53, 2 June 2015)
  78. Fixed steel and concrete gravity base structures‏‎ (12:27, 2 June 2015)
  79. Flare and vent disposal systems‏‎ (12:32, 2 June 2015)
  80. Offshore and subsea facilities‏‎ (12:33, 2 June 2015)
  81. Subsea systems‏‎ (12:35, 2 June 2015)
  82. Remotely operated vehicles (ROVs)‏‎ (12:39, 2 June 2015)
  83. History of offshore drilling units‏‎ (12:42, 2 June 2015)
  84. Subsea processing benefits‏‎ (12:50, 2 June 2015)
  85. Subsea processing design‏‎ (12:51, 2 June 2015)
  86. Subsea processing overview‏‎ (13:01, 2 June 2015)
  87. Subsea processing technology‏‎ (13:05, 2 June 2015)
  88. Subsea separation‏‎ (13:06, 2 June 2015)
  89. Stranded gas‏‎ (13:21, 2 June 2015)
  90. Calculating gas properties‏‎ (13:59, 2 June 2015)
  91. Compressed natural gas (CNG)‏‎ (14:01, 2 June 2015)
  92. Asphaltene precipitation‏‎ (14:02, 2 June 2015)
  93. Compliant and floating systems‏‎ (22:32, 2 June 2015)
  94. Gas to methanol‏‎ (08:45, 3 June 2015)
  95. Gas to liquids (GTL)‏‎ (08:50, 3 June 2015)
  96. Project execution of surface facilities‏‎ (08:54, 3 June 2015)
  97. Pipeline pigging‏‎ (09:08, 3 June 2015)
  98. Connate water saturation evaluation‏‎ (09:12, 3 June 2015)
  99. Estimating permeability based on grain size‏‎ (09:23, 3 June 2015)
  100. Estimating permeability based on Kozeny-Carman equation‏‎ (09:45, 3 June 2015)
  101. Estimating permeability based on surface area and water saturation‏‎ (10:03, 3 June 2015)
  102. Estimating permeability from well log data‏‎ (10:08, 3 June 2015)
  103. Estimating reservoir properties with nonseismic techniques‏‎ (10:18, 3 June 2015)
  104. Isothermal compressibility of gases‏‎ (10:34, 3 June 2015)
  105. Isothermal compressibility of oil‏‎ (10:40, 3 June 2015)
  106. Reservoir pressure and temperature‏‎ (10:53, 3 June 2015)
  107. Reservoir pressure data interpretation‏‎ (10:57, 3 June 2015)
  108. Comparison of permeability estimation models‏‎ (11:29, 3 June 2015)
  109. Geothermal reservoir characterization‏‎ (11:50, 3 June 2015)
  110. Diatomite‏‎ (12:17, 3 June 2015)
  111. Siliciclastic reservoir geology‏‎ (12:18, 3 June 2015)
  112. Reservoir simulation applications‏‎ (12:29, 3 June 2015)
  113. Layer thickness evaluation‏‎ (12:41, 3 June 2015)
  114. Lithology and rock type determination‏‎ (12:47, 3 June 2015)
  115. Reservoir geology‏‎ (12:51, 3 June 2015)
  116. Geology impact on immiscible gas displacement‏‎ (13:17, 3 June 2015)
  117. Geology in reservoir models‏‎ (13:50, 3 June 2015)
  118. Seismic profiling‏‎ (13:55, 3 June 2015)
  119. Seismic wave propagation‏‎ (14:02, 3 June 2015)
  120. Acoustic velocity dispersion and attenuation‏‎ (14:07, 3 June 2015)
  121. Compressional and shear velocities‏‎ (14:12, 3 June 2015)
  122. Seismic time-lapse reservoir monitoring‏‎ (14:17, 3 June 2015)
  123. Crude oil characterization‏‎ (14:58, 3 June 2015)
  124. Solution gas drive reservoirs‏‎ (15:01, 3 June 2015)
  125. Gas properties‏‎ (15:03, 3 June 2015)
  126. Gas viscosity‏‎ (15:06, 3 June 2015)
  127. Oilfield water compressibility‏‎ (15:09, 3 June 2015)
  128. Solving unsteady flow problems with Laplace transform and source functions‏‎ (16:58, 3 June 2015)
  129. Pore fluid properties‏‎ (10:18, 4 June 2015)
  130. Quaternary phase diagrams‏‎ (10:20, 4 June 2015)
  131. Natural gas properties‏‎ (10:28, 4 June 2015)
  132. Oil fluid characteristics‏‎ (11:29, 4 June 2015)
  133. Oil fluid properties‏‎ (11:40, 4 June 2015)
  134. Oil formation volume factor‏‎ (11:51, 4 June 2015)
  135. Oil viscosity‏‎ (14:16, 4 June 2015)
  136. Phase behavior in reservoir simulation‏‎ (15:06, 4 June 2015)
  137. Phase behavior of water and hydrocarbon systems‏‎ (15:09, 4 June 2015)
  138. Phase diagrams‏‎ (15:11, 4 June 2015)
  139. Phase diagrams for EOR processes‏‎ (15:16, 4 June 2015)
  140. Phase diagrams for reservoir fluid systems‏‎ (15:18, 4 June 2015)
  141. Phase diagrams of miscible processes‏‎ (15:21, 4 June 2015)
  142. Real gases‏‎ (15:28, 4 June 2015)
  143. Ternary phase diagrams‏‎ (15:32, 4 June 2015)
  144. Thermodynamics and phase behavior‏‎ (15:35, 4 June 2015)
  145. Vapor pressure‏‎ (15:37, 4 June 2015)
  146. Compositional simulation of miscible processes‏‎ (15:42, 4 June 2015)
  147. Equations of state for miscible processes‏‎ (15:45, 4 June 2015)
  148. Phase behavior of mixtures‏‎ (15:49, 4 June 2015)
  149. Phase behavior of pure fluids‏‎ (15:51, 4 June 2015)
  150. Interfacial tension‏‎ (16:05, 4 June 2015)
  151. Equations of state‏‎ (16:08, 4 June 2015)
  152. Phase characterization of in-situ fluids‏‎ (18:26, 4 June 2015)
  153. Thermodynamic models for wax precipitation‏‎ (18:36, 4 June 2015)
  154. Compaction drive reservoirs‏‎ (18:40, 4 June 2015)
  155. Compressive strength of rocks‏‎ (18:46, 4 June 2015)
  156. Emulsion treating methods‏‎ (18:59, 4 June 2015)
  157. Fluid flow in horizontal wells‏‎ (19:01, 4 June 2015)
  158. Fluid flow in hydraulically fractured wells‏‎ (19:04, 4 June 2015)
  159. Fluid friction‏‎ (19:13, 4 June 2015)
  160. Mathematics of fluid flow‏‎ (19:17, 4 June 2015)
  161. Measurements affecting reservoir fluid sampling‏‎ (19:19, 4 June 2015)
  162. Nodal analysis‏‎ (19:21, 4 June 2015)
  163. Vector analysis of fluid flow‏‎ (19:22, 4 June 2015)
  164. Pressure transient testing‏‎ (08:33, 8 June 2015)
  165. Foam behavior in porous media‏‎ (08:45, 8 June 2015)
  166. Numerical methods analysis of fluid flow‏‎ (08:54, 8 June 2015)
  167. Permeability estimation in tight gas reservoirs‏‎ (09:02, 8 June 2015)
  168. Single phase permeability‏‎ (09:28, 8 June 2015)
  169. Solving unsteady flow problems with Green's and source functions‏‎ (09:29, 8 June 2015)
  170. Source function solutions of the diffusion equation‏‎ (09:32, 8 June 2015)
  171. Transient analysis mathematics‏‎ (09:33, 8 June 2015)
  172. Pressure drop evaluation along pipelines‏‎ (09:38, 8 June 2015)
  173. Fluid flow in PCP systems‏‎ (09:40, 8 June 2015)
  174. Diverting spinner flowmeter‏‎ (09:40, 8 June 2015)
  175. Horizontal well applications in steamflooding‏‎ (09:49, 8 June 2015)
  176. Microscopic efficiency of waterflooding‏‎ (09:54, 8 June 2015)
  177. Electrical engineering considerations for electromagnetic heating of oil‏‎ (10:03, 8 June 2015)
  178. Electromagnetic heating of oil‏‎ (10:14, 8 June 2015)
  179. Electromagnetic heating process‏‎ (10:16, 8 June 2015)
  180. Heating oil emulsions‏‎ (10:17, 8 June 2015)
  181. Sandstone reservoir with combination drives and injection‏‎ (10:18, 8 June 2015)
  182. Areal displacement in a waterflood‏‎ (10:26, 8 June 2015)
  183. Low permeability sandstone waterflood‏‎ (10:26, 8 June 2015)
  184. Macroscopic displacement efficiency of a linear waterflood‏‎ (10:28, 8 June 2015)
  185. Vertical displacement in a waterflood‏‎ (10:46, 8 June 2015)
  186. Sandstone reservoir with strong waterdrive and crestal gas injection‏‎ (11:39, 8 June 2015)
  187. Solution gas driven sandstone reservoir with water and gas injection‏‎ (11:39, 8 June 2015)
  188. Sandstone field with waterflood, gas and miscible solvent injection‏‎ (11:40, 8 June 2015)
  189. Field performance of polymer waterflooding‏‎ (11:43, 8 June 2015)
  190. Carbonate reservoir with waterflood and miscible injection‏‎ (11:44, 8 June 2015)
  191. Immiscible gas injection monitoring‏‎ (14:56, 8 June 2015)
  192. Displacement efficiency of immiscible gas injection‏‎ (07:43, 9 June 2015)
  193. Gas cap drive reservoirs‏‎ (07:46, 9 June 2015)
  194. Gravity stable miscible gas injection in steeply dipping sandstone reservoir‏‎ (07:47, 9 June 2015)
  195. Immiscible gas injection case studies‏‎ (07:47, 9 June 2015)
  196. Immiscible gas injection in oil reservoirs‏‎ (07:52, 9 June 2015)
  197. Immiscible gas injection performance‏‎ (08:22, 9 June 2015)
  198. Swanson River field‏‎ (08:26, 9 June 2015)
  199. Vertical or gravity drainage gas displacement‏‎ (08:32, 9 June 2015)
  200. Chamber lift‏‎ (08:38, 9 June 2015)
  201. Profiling oil production under WAG recovery‏‎ (08:38, 9 June 2015)
  202. Residual gas saturation testing‏‎ (08:39, 9 June 2015)
  203. Monetizing stranded gas‏‎ (08:52, 9 June 2015)
  204. Residual oil evaluation using single well chemical tracer test‏‎ (08:54, 9 June 2015)
  205. Conformance problems‏‎ (08:59, 9 June 2015)
  206. Evaluation of conformance improvement gels‏‎ (09:22, 9 June 2015)
  207. Field applications of conformance improvement foams‏‎ (09:24, 9 June 2015)
  208. Field applications of resin for conformance improvement‏‎ (09:30, 9 June 2015)
  209. Gel breakers‏‎ (09:30, 9 June 2015)
  210. Gels for conformance improvement‏‎ (09:34, 9 June 2015)
  211. Field applications of conformance improvement gel treatments‏‎ (09:39, 9 June 2015)
  212. Placement of conformance improvement gels‏‎ (09:48, 9 June 2015)
  213. Foams as blocking agents‏‎ (09:56, 9 June 2015)
  214. Foams for conformance improvement‏‎ (10:01, 9 June 2015)
  215. Conformance improvement‏‎ (10:04, 9 June 2015)
  216. Preformed particle gel for conformance-improvement‏‎ (10:06, 9 June 2015)
  217. Steam delivery systems for EOR‏‎ (10:23, 9 June 2015)
  218. Steamflood heat management‏‎ (10:50, 9 June 2015)
  219. Operating practices for in-situ combustion‏‎ (10:56, 9 June 2015)
  220. Modeling fluid flow with electromagnetic heating‏‎ (11:01, 9 June 2015)
  221. Predicting behavior of in-situ combustion‏‎ (11:09, 9 June 2015)
  222. Predicting performance of in-situ combustion‏‎ (11:10, 9 June 2015)
  223. Thermal recovery by steam injection‏‎ (11:14, 9 June 2015)
  224. Disproportionate permeability reduction‏‎ (12:09, 9 June 2015)
  225. Polymer impact on permeability‏‎ (12:15, 9 June 2015)
  226. Polymer waterflooding design and implementation‏‎ (12:22, 9 June 2015)
  227. Sandstone reservoir with polymer injection‏‎ (12:22, 9 June 2015)
  228. Polymers for conformance improvement‏‎ (12:24, 9 June 2015)
  229. Drilling safety‏‎ (16:36, 11 June 2015)
  230. Enriched hydrocarbon miscible flooding case studies‏‎ (09:37, 12 June 2015)
  231. Scaleup to full field miscible flood behavior‏‎ (09:40, 12 June 2015)
  232. Nitrogen miscible flooding case studies‏‎ (09:43, 12 June 2015)
  233. Miscible flooding‏‎ (09:49, 12 June 2015)
  234. Designing a miscible flood‏‎ (09:50, 12 June 2015)
  235. CO2 miscible flooding case studies‏‎ (09:52, 12 June 2015)
  236. Boundary effects in diagnostic plots‏‎ (10:13, 12 June 2015)
  237. Challenges with probabilistic models‏‎ (10:13, 12 June 2015)
  238. Design of uncertainty models‏‎ (10:14, 12 June 2015)
  239. Diagonalizing the permeability tensor‏‎ (10:15, 12 June 2015)
  240. High performance computing and reservoir simulation‏‎ (10:32, 12 June 2015)
  241. Material balance in waterdrive reservoirs‏‎ (10:39, 12 June 2015)
  242. Reservoir simulation linear equation solver‏‎ (11:07, 12 June 2015)
  243. Upscaling of grid properties in reservoir simulation‏‎ (11:10, 12 June 2015)
  244. Waterdrive reservoirs‏‎ (12:11, 12 June 2015)
  245. Streamline simulation‏‎ (12:20, 12 June 2015)
  246. Assessing reservoir management‏‎ (12:27, 12 June 2015)
  247. Borehole gravimetry‏‎ (12:28, 12 June 2015)
  248. Estimating horizontal well productivity‏‎ (12:29, 12 June 2015)
  249. Gas well deliverability‏‎ (12:40, 12 June 2015)
  250. Isochronal tests for gas wells‏‎ (12:44, 12 June 2015)
  251. Well log interpretation‏‎ (12:45, 12 June 2015)
  252. Gas well performance‏‎ (12:49, 12 June 2015)
  253. Corrections to core measurements of permeability‏‎ (09:52, 15 June 2015)
  254. Material balance in oil reservoirs‏‎ (20:40, 18 June 2015)
  255. Primary drive mechanisms‏‎ (23:24, 18 June 2015)
  256. Acoustic logging‏‎ (10:37, 24 June 2015)
  257. Acoustic logging tools‏‎ (10:37, 24 June 2015)
  258. Density logging‏‎ (10:37, 24 June 2015)
  259. Fracture identification with acoustic logging‏‎ (10:37, 24 June 2015)
  260. Geochemical logs‏‎ (10:40, 24 June 2015)
  261. Geological applications of acoustic logging‏‎ (10:40, 24 June 2015)
  262. Induction logging‏‎ (10:40, 24 June 2015)
  263. Log analysis in shaly formations‏‎ (10:41, 24 June 2015)
  264. Microresistivity logs‏‎ (10:41, 24 June 2015)
  265. Multiple log interpretation‏‎ (10:41, 24 June 2015)
  266. Net pay determination‏‎ (10:44, 24 June 2015)
  267. Neutron porosity logs‏‎ (10:45, 24 June 2015)
  268. NMR applications‏‎ (10:45, 24 June 2015)
  269. NMR logging tools‏‎ (10:45, 24 June 2015)
  270. NMR logging while drilling‏‎ (10:45, 24 June 2015)
  271. NMR petrophysics‏‎ (10:45, 24 June 2015)
  272. NMR quality control‏‎ (10:45, 24 June 2015)
  273. Noise logging‏‎ (10:46, 24 June 2015)
  274. Nuclear log interpretation‏‎ (10:46, 24 June 2015)
  275. Nuclear logging‏‎ (10:46, 24 June 2015)
  276. Nuclear logging while drilling‏‎ (10:46, 24 June 2015)
  277. Nuclear magnetic resonance (NMR) logging‏‎ (10:46, 24 June 2015)
  278. Oil density‏‎ (10:50, 24 June 2015)
  279. Permeability determination‏‎ (10:50, 24 June 2015)
  280. Permeability estimation with Stoneley waves‏‎ (10:51, 24 June 2015)
  281. Petrophysical analysis case studies‏‎ (10:51, 24 June 2015)
  282. Petrophysical data sources‏‎ (10:51, 24 June 2015)
  283. Planning for NMR log data collection‏‎ (10:54, 24 June 2015)
  284. Porosity determination‏‎ (10:54, 24 June 2015)
  285. Porosity determination with NMR logging‏‎ (10:54, 24 June 2015)
  286. Porosity evaluation with acoustic logging‏‎ (10:54, 24 June 2015)
  287. Porosity for resource in place calculations‏‎ (10:55, 24 June 2015)
  288. Pulsed neutron lifetime logs‏‎ (10:55, 24 June 2015)
  289. Resistivity and spontaneous (SP) logging‏‎ (10:58, 24 June 2015)
  290. Saturation evaluation‏‎ (10:58, 24 June 2015)
  291. Spectral gamma ray logs‏‎ (10:58, 24 June 2015)
  292. Spontaneous (SP) log‏‎ (10:58, 24 June 2015)
  293. Temperature logging‏‎ (10:59, 24 June 2015)
  294. Temperature-depth profiles‏‎ (10:59, 24 June 2015)
  295. Type curves‏‎ (10:59, 24 June 2015)
  296. Water saturation determination‏‎ (10:59, 24 June 2015)
  297. Advanced acoustic data analysis‏‎ (11:03, 24 June 2015)
  298. Carbon oxygen logs‏‎ (11:04, 24 June 2015)
  299. Conventional applications of acoustic logging‏‎ (11:04, 24 June 2015)
  300. Electrode resistivity devices‏‎ (11:04, 24 June 2015)
  301. Fluid typing with NMR logging‏‎ (11:04, 24 June 2015)
  302. Gamma ray logs‏‎ (11:04, 24 June 2015)
  303. Openhole caliper logs‏‎ (11:04, 24 June 2015)
  304. Petrophysical properties of gas reservoirs‏‎ (11:05, 24 June 2015)
  305. Sand control in intelligent wells‏‎ (13:18, 24 June 2015)
  306. AFE: cementing‏‎ (10:02, 25 June 2015)
  307. AFE: completion equipment‏‎ (10:03, 25 June 2015)
  308. AFE: drilling fluids‏‎ (10:05, 25 June 2015)
  309. AFE: drilling rig and tools‏‎ (10:06, 25 June 2015)
  310. AFE: location preparation‏‎ (10:08, 25 June 2015)
  311. AFE: projected drilling time‏‎ (10:10, 25 June 2015)
  312. AFE: rental equipment‏‎ (10:10, 25 June 2015)
  313. AFE: supervision and administration‏‎ (10:10, 25 June 2015)
  314. AFE: support services‏‎ (10:11, 25 June 2015)
  315. AFE: transportation‏‎ (10:11, 25 June 2015)
  316. AFE: wellhead equipment‏‎ (10:15, 25 June 2015)
  317. AFE and initial project cost estimate‏‎ (10:15, 25 June 2015)
  318. Conventional ship and barge-shaped rigs‏‎ (10:16, 25 June 2015)
  319. Service reel for CT unit‏‎ (10:17, 25 June 2015)
  320. Expandable tubulars‏‎ (10:19, 25 June 2015)
  321. Metallurgy for downhole equipment‏‎ (10:28, 25 June 2015)
  322. Authority for expenditures (AFE)‏‎ (10:29, 25 June 2015)
  323. Designing an underbalanced drilling operation‏‎ (10:34, 25 June 2015)
  324. Predicting CT fatigue‏‎ (10:34, 25 June 2015)
  325. CT control and monitoring equipment‏‎ (10:35, 25 June 2015)
  326. Vibrating systems with multiple sources of motion‏‎ (10:38, 25 June 2015)
  327. Vibration theory‏‎ (10:41, 25 June 2015)
  328. Hole cleaning‏‎ (10:47, 25 June 2015)
  329. Offshore rig crews‏‎ (12:18, 25 June 2015)
  330. Submersibles‏‎ (12:18, 25 June 2015)
  331. Semisubmersibles‏‎ (12:18, 25 June 2015)
  332. MODU types‏‎ (12:18, 25 June 2015)
  333. MODU equipment and capabilities‏‎ (12:19, 25 June 2015)
  334. Jackups‏‎ (12:19, 25 June 2015)
  335. MODU riser and mooring systems‏‎ (12:23, 25 June 2015)
  336. Classification and registration of offshore drilling units‏‎ (12:29, 25 June 2015)
  337. Fixed platform rigs‏‎ (12:29, 25 June 2015)
  338. Functions of drilling fluid‏‎ (12:29, 25 June 2015)
  339. Mud contamination‏‎ (12:29, 25 June 2015)
  340. Mudline suspension system‏‎ (12:29, 25 June 2015)
  341. Underbalanced drilling circulation designs‏‎ (12:33, 25 June 2015)
  342. Magnetic-resonance-image (MRI) logging while drilling‏‎ (12:39, 25 June 2015)
  343. Measurement while drilling (MWD)‏‎ (12:41, 25 June 2015)
  344. Acoustic logging while drilling‏‎ (12:45, 25 June 2015)
  345. Formation resistivity determination‏‎ (12:48, 25 June 2015)
  346. LWD induction tools‏‎ (12:50, 25 June 2015)
  347. Mud logging‏‎ (12:51, 25 June 2015)
  348. Internal pressure loads on casing and tubing strings‏‎ (12:55, 25 June 2015)
  349. Foamed cement‏‎ (12:56, 25 June 2015)
  350. Hole preparation in cementing‏‎ (12:56, 25 June 2015)
  351. Rigsite data systems‏‎ (12:57, 25 June 2015)
  352. Contact time in cementing‏‎ (13:03, 25 June 2015)
  353. International standards for tubing‏‎ (13:06, 25 June 2015)
  354. Casing and tubing buckling‏‎ (13:10, 25 June 2015)
  355. Remedial cementing placement techniques‏‎ (13:10, 25 June 2015)
  356. Primary cementing placement design‏‎ (13:11, 25 June 2015)
  357. Spacers and flushers in cementing‏‎ (13:14, 25 June 2015)
  358. Sweep pills in hole cleanup for cementing‏‎ (13:15, 25 June 2015)
  359. Casing collar locator‏‎ (13:16, 25 June 2015)
  360. Casing-annulus-flow installation design‏‎ (13:16, 25 June 2015)
  361. Hole geometry‏‎ (13:23, 25 June 2015)
  362. Thermal loads on casing and tubing strings‏‎ (13:23, 25 June 2015)
  363. Casing design‏‎ (13:24, 25 June 2015)
  364. Water insoluble materials in cementing‏‎ (13:24, 25 June 2015)
  365. Water soluble materials in cementing‏‎ (13:24, 25 June 2015)
  366. Cement slurry accelerators‏‎ (13:24, 25 June 2015)
  367. Cement slurry design testing‏‎ (13:24, 25 June 2015)
  368. Cement slurry dispersants‏‎ (13:24, 25 June 2015)
  369. Cement composition and classification‏‎ (13:31, 25 June 2015)
  370. Cement slurry design‏‎ (13:31, 25 June 2015)
  371. Risk-based casing design‏‎ (13:32, 25 June 2015)
  372. External pressure loads on casing and tubing strings‏‎ (13:38, 25 June 2015)
  373. Cement slurry fluid-loss-control additives (FLAs)‏‎ (13:39, 25 June 2015)
  374. Cement slurry weighting agents‏‎ (13:39, 25 June 2015)
  375. Cement slurry extenders‏‎ (13:50, 25 June 2015)
  376. Specialty cements‏‎ (13:50, 25 June 2015)
  377. Cement slurry retarders‏‎ (13:50, 25 June 2015)
  378. Casing inspection logs‏‎ (13:55, 25 June 2015)
  379. Cement bond logs‏‎ (14:04, 25 June 2015)
  380. Cementing hardware‏‎ (14:06, 25 June 2015)
  381. Estimating mechanical properties with seismic‏‎ (14:32, 25 June 2015)
  382. Estimating permeability considering mineralogy‏‎ (14:34, 25 June 2015)
  383. Isotropic elastic properties of minerals‏‎ (14:34, 25 June 2015)
  384. Predicting rock properties‏‎ (15:05, 25 June 2015)
  385. Rock acoustic velocities and in-situ stress‏‎ (15:06, 25 June 2015)
  386. Rock acoustic velocities and pressure‏‎ (15:09, 25 June 2015)
  387. Rock acoustic velocities and porosity‏‎ (15:12, 25 June 2015)
  388. Rock acoustic velocities and temperature‏‎ (15:15, 25 June 2015)
  389. Rock density and porosity‏‎ (15:21, 25 June 2015)
  390. Rock failure relationships‏‎ (15:23, 25 June 2015)
  391. Rock moduli boundary constraints‏‎ (15:32, 25 June 2015)
  392. Rock strength from log parameters‏‎ (15:33, 25 June 2015)
  393. Rock type influence on permeability‏‎ (15:36, 25 June 2015)
  394. Rock types‏‎ (15:38, 25 June 2015)
  395. Stress strain relationships in rocks‏‎ (15:39, 25 June 2015)
  396. Unitized wellhead‏‎ (11:42, 26 June 2015)
  397. Wellhead systems‏‎ (11:42, 26 June 2015)
  398. Wellhead systems for land drilling‏‎ (11:42, 26 June 2015)
  399. Subsea wellhead systems‏‎ (11:43, 26 June 2015)
  400. Basic vibration analysis‏‎ (11:50, 26 June 2015)
  401. Differential-pressure pipe sticking‏‎ (12:06, 26 June 2015)
  402. Offshore drilling agreements‏‎ (12:14, 26 June 2015)
  403. Mechanical pipe sticking‏‎ (12:14, 26 June 2015)
  404. Kicks‏‎ (12:15, 26 June 2015)
  405. Equipment related drilling problems‏‎ (12:17, 26 June 2015)
  406. Borehole instability‏‎ (12:24, 26 June 2015)
  407. Surface data sensors during drilling‏‎ (12:32, 26 June 2015)
  408. Drilling problems‏‎ (12:33, 26 June 2015)
  409. Challenges in drilling salt formations and rubble zones‏‎ (12:36, 26 June 2015)
  410. Riserless interval‏‎ (12:36, 26 June 2015)
  411. Deep hard-rock drilling‏‎ (12:38, 26 June 2015)
  412. Drilling HP/HT wells‏‎ (12:39, 26 June 2015)
  413. Drilling microsystems‏‎ (12:41, 26 June 2015)
  414. Drilling dynamics‏‎ (12:43, 26 June 2015)
  415. Casing drilling‏‎ (12:44, 26 June 2015)
  416. Underbalanced drilling limitations‏‎ (12:54, 26 June 2015)
  417. Drilling fluid challenges‏‎ (12:56, 26 June 2015)
  418. Drillpipe failures‏‎ (12:57, 26 June 2015)
  419. Ultradeepwater drilling units‏‎ (12:58, 26 June 2015)
  420. Electromagnetic logging while drilling‏‎ (13:06, 26 June 2015)
  421. Directional deviation tools‏‎ (13:07, 26 June 2015)
  422. Drilling fluids‏‎ (13:09, 26 June 2015)
  423. Downhole equipment for UBD operations‏‎ (13:17, 26 June 2015)
  424. Collecting data while drilling‏‎ (13:18, 26 June 2015)
  425. Directional drilling‏‎ (13:19, 26 June 2015)
  426. Completing underbalanced wells‏‎ (13:20, 26 June 2015)
  427. Fluid mechanics for drilling‏‎ (13:24, 26 June 2015)
  428. Mechanical loads on casing and tubing strings‏‎ (13:42, 26 June 2015)
  429. Determining depth to set casing‏‎ (13:43, 26 June 2015)
  430. Acquiring bottomhole pressure and temperature data‏‎ (13:59, 26 June 2015)
  431. Circulatability treatment in cementing‏‎ (13:59, 26 June 2015)
  432. Stuck pipe‏‎ (14:00, 26 June 2015)
  433. Drilling induced formation damage‏‎ (14:03, 26 June 2015)
  434. Directional well profile: overburden section‏‎ (14:28, 26 June 2015)
  435. Directional well profile: reservoir penetration section‏‎ (14:28, 26 June 2015)
  436. Surface equipment for UBD operations‏‎ (14:29, 26 June 2015)
  437. Underbalanced drilling (UBD)‏‎ (14:29, 26 June 2015)
  438. Workover of a UBD well‏‎ (14:29, 26 June 2015)
  439. Reservoir inflow in underbalanced drilling‏‎ (14:30, 26 June 2015)
  440. Directional well profile: surface-hole section‏‎ (14:36, 26 June 2015)
  441. Dynamic wellbore pressure prediction‏‎ (14:37, 26 June 2015)
  442. Shut-in procedures for well control‏‎ (14:45, 26 June 2015)
  443. Static wellbore pressure equations‏‎ (14:45, 26 June 2015)
  444. Variables affecting kill procedures‏‎ (14:45, 26 June 2015)
  445. Well control stack for CT operations‏‎ (14:46, 26 June 2015)
  446. Well control with one-circulation method‏‎ (14:46, 26 June 2015)
  447. Bottomhole pressure and temperature gauges‏‎ (14:47, 26 June 2015)
  448. Surge pressure prediction for wellbore flow‏‎ (14:50, 26 June 2015)
  449. Coiled tubing fatigue‏‎ (14:51, 26 June 2015)
  450. Overpressure prediction using acoustic logging‏‎ (14:56, 26 June 2015)
  451. Pore pressure prediction using seismic‏‎ (09:50, 29 June 2015)
  452. Determination of flow efficiency and skin‏‎ (09:51, 29 June 2015)
  453. Formation damage in injection wells‏‎ (09:51, 29 June 2015)
  454. Additional causes of formation damage‏‎ (09:54, 29 June 2015)
  455. Formation damage from condensate banking‏‎ (10:07, 29 June 2015)
  456. Fluid flow with formation damage‏‎ (10:10, 29 June 2015)
  457. Formation damage from perforating and cementing‏‎ (10:15, 29 June 2015)
  458. Data collection for well planning‏‎ (10:29, 29 June 2015)
  459. Hole deviation‏‎ (10:30, 29 June 2015)
  460. Formation damage from fines migration‏‎ (10:52, 29 June 2015)
  461. Calculation methods for directional survey‏‎ (10:54, 29 June 2015)
  462. Directional survey for 3D reservoir modeling‏‎ (10:56, 29 June 2015)
  463. Cuttings analysis during mud logging‏‎ (10:58, 29 June 2015)
  464. Hydrocarbon analysis during mud logging‏‎ (10:59, 29 June 2015)
  465. Directional survey‏‎ (11:06, 29 June 2015)
  466. Arctic well completions‏‎ (11:07, 29 June 2015)
  467. Well completion strategy in sandstone reservoir with strong waterdrive‏‎ (11:07, 29 June 2015)
  468. Packer standards and classifications‏‎ (11:12, 29 June 2015)
  469. Cased hole completions‏‎ (11:13, 29 June 2015)
  470. Cement hydration‏‎ (11:17, 29 June 2015)
  471. Downhole processing overview‏‎ (12:37, 29 June 2015)
  472. Elastomers‏‎ (12:44, 29 June 2015)
  473. Subsea completion systems‏‎ (12:47, 29 June 2015)
  474. Perforating design‏‎ (12:57, 29 June 2015)
  475. Perforating equipment‏‎ (12:58, 29 June 2015)
  476. Perforating methods‏‎ (12:59, 29 June 2015)
  477. Combination completions‏‎ (13:04, 29 June 2015)
  478. Gravel pack equipment and tools‏‎ (13:10, 29 June 2015)
  479. Slotted liners and wire wrapped screens‏‎ (13:17, 29 June 2015)
  480. History of gravel packs‏‎ (13:23, 29 June 2015)
  481. Openhole gravel packing‏‎ (13:23, 29 June 2015)
  482. Gravel placement techniques‏‎ (13:24, 29 June 2015)
  483. Well preparation for gravel packing‏‎ (13:25, 29 June 2015)
  484. Sand control techniques‏‎ (13:26, 29 June 2015)
  485. Prepacking perforations with gravel‏‎ (13:33, 29 June 2015)
  486. Sand control in horizontal and deviated wells‏‎ (13:34, 29 June 2015)
  487. Applications of intelligent wells‏‎ (13:41, 29 June 2015)
  488. Remote well monitoring‏‎ (13:46, 29 June 2015)
  489. Deepwater drilling‏‎ (13:51, 29 June 2015)
  490. Completion flow control accessories‏‎ (13:52, 29 June 2015)
  491. Tubing injector for CT unit‏‎ (14:11, 29 June 2015)
  492. Tubing‏‎ (14:41, 29 June 2015)
  493. Tubing changes from pressure and temperature‏‎ (14:47, 29 June 2015)
  494. Tubing design factors‏‎ (14:54, 29 June 2015)
  495. Tubing inspection and handling‏‎ (15:01, 29 June 2015)
  496. Cuttings transport‏‎ (16:17, 29 June 2015)
  497. Production forecasts‏‎ (10:21, 30 June 2015)
  498. Offshore production operations‏‎ (10:22, 30 June 2015)
  499. Offshore Arctic operations‏‎ (10:23, 30 June 2015)
  500. Formation damage from completion workover fluids‏‎ (10:29, 30 June 2015)

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)