You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Oldest pages

Jump to navigation Jump to search

Showing below up to 250 results in range #1 to #250.

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

  1. Subscript symbols in alphabetical order‏‎ (13:35, 19 September 2012)
  2. Economics symbols in alphabetical order‏‎ (13:38, 19 September 2012)
  3. Basic symbols in alphabetical order‏‎ (14:46, 19 September 2012)
  4. Unfocused gamma ray density logging‏‎ (10:59, 19 July 2013)
  5. SPE symbols standard‏‎ (14:19, 12 September 2013)
  6. Conversion factors for the vara‏‎ (14:23, 12 September 2013)
  7. Approximate conversion factors‏‎ (14:34, 12 September 2013)
  8. Equilibrium of water and hydrocarbon systems with hydrates‏‎ (14:23, 14 September 2013)
  9. Geological influences on acoustic impedance‏‎ (10:43, 24 July 2014)
  10. Frequency-wavelength relations for free space‏‎ (10:39, 14 August 2014)
  11. Guidelines for MMPs with different solvents‏‎ (12:14, 18 August 2014)
  12. Sand‏‎ (10:14, 20 August 2014)
  13. Dry gas reservoirs‏‎ (13:08, 17 September 2014)
  14. Stability of oil emulsions‏‎ (12:30, 22 October 2014)
  15. Hydrostatic testing‏‎ (09:25, 6 January 2015)
  16. Ghawar‏‎ (13:09, 12 January 2015)
  17. Burgan‏‎ (13:10, 12 January 2015)
  18. Glossaries‏‎ (11:50, 13 January 2015)
  19. Perforation‏‎ (12:11, 2 February 2015)
  20. Champion page‏‎ (12:09, 3 February 2015)
  21. Conformance improvement gel treatment design‏‎ (15:28, 11 February 2015)
  22. Hydrogen sulfide (H2S) fields‏‎ (15:04, 18 February 2015)
  23. Basins and fields‏‎ (16:08, 18 February 2015)
  24. Actuator‏‎ (16:50, 24 February 2015)
  25. SPE Bookstore‏‎ (14:46, 23 March 2015)
  26. RFID‏‎ (12:09, 21 April 2015)
  27. Liquid mud plant barge‏‎ (09:57, 15 May 2015)
  28. Autonomous vehicles‏‎ (00:28, 27 May 2015)
  29. Virtual flowmeters‏‎ (13:35, 1 June 2015)
  30. Alternating current motors‏‎ (18:33, 1 June 2015)
  31. Gas turbine engines‏‎ (18:34, 1 June 2015)
  32. Motor enclosures‏‎ (18:36, 1 June 2015)
  33. Prime mover for CT unit‏‎ (18:42, 1 June 2015)
  34. Prime movers‏‎ (18:43, 1 June 2015)
  35. Pump drivers‏‎ (18:43, 1 June 2015)
  36. Reciprocating engines‏‎ (18:44, 1 June 2015)
  37. Induction motors‏‎ (18:44, 1 June 2015)
  38. Inference liquid meters‏‎ (18:44, 1 June 2015)
  39. Rotary positive displacement compressors‏‎ (18:45, 1 June 2015)
  40. Centrifugal compressor‏‎ (18:45, 1 June 2015)
  41. Reciprocating compressor‏‎ (18:46, 1 June 2015)
  42. Compressors‏‎ (18:46, 1 June 2015)
  43. Power factor and capacitors‏‎ (18:57, 1 June 2015)
  44. Hazardous area classification for electrical systems‏‎ (19:03, 1 June 2015)
  45. Electrical systems‏‎ (19:40, 1 June 2015)
  46. Electrical grounding‏‎ (19:41, 1 June 2015)
  47. Electrical distribution systems‏‎ (19:44, 1 June 2015)
  48. NEMA motor characteristics‏‎ (20:12, 1 June 2015)
  49. Motor specifications‏‎ (20:13, 1 June 2015)
  50. Gas turbine meter‏‎ (20:15, 1 June 2015)
  51. Vent system design for storage tanks‏‎ (06:56, 2 June 2015)
  52. Tank breathing‏‎ (06:56, 2 June 2015)
  53. Tank battery‏‎ (06:57, 2 June 2015)
  54. Site considerations for production tanks‏‎ (06:57, 2 June 2015)
  55. Floating roof tanks‏‎ (06:57, 2 June 2015)
  56. Fixed roof tanks‏‎ (06:57, 2 June 2015)
  57. Microwave-processed metals‏‎ (07:23, 2 June 2015)
  58. Resin composites‏‎ (07:24, 2 June 2015)
  59. Gas pipelines‏‎ (07:33, 2 June 2015)
  60. Piping and pipeline systems‏‎ (07:34, 2 June 2015)
  61. Pipelines‏‎ (07:52, 2 June 2015)
  62. Pipeline design consideration and standards‏‎ (08:09, 2 June 2015)
  63. Controlling liquid leaks from tanks‏‎ (08:11, 2 June 2015)
  64. Drilling fluid types‏‎ (08:52, 2 June 2015)
  65. Gas hydrates in nature‏‎ (09:07, 2 June 2015)
  66. Equilibrium of water and hydrocarbon systems without hydrates‏‎ (09:13, 2 June 2015)
  67. Hydrate plug removal‏‎ (09:21, 2 June 2015)
  68. Transporting stranded gas as hydrates‏‎ (09:38, 2 June 2015)
  69. Asphaltene deposition and plugging‏‎ (09:51, 2 June 2015)
  70. Formation damage from paraffins and asphaltenes‏‎ (10:36, 2 June 2015)
  71. Thermodynamic models for asphaltene precipitation‏‎ (11:01, 2 June 2015)
  72. Orifice gas meters‏‎ (11:37, 2 June 2015)
  73. Positive displacement liquid meters‏‎ (11:38, 2 June 2015)
  74. Pressure transducer technology‏‎ (11:41, 2 June 2015)
  75. Temperature sensors‏‎ (11:41, 2 June 2015)
  76. Ultrasonic gas meters‏‎ (11:47, 2 June 2015)
  77. Binary phase diagrams‏‎ (11:53, 2 June 2015)
  78. Fixed steel and concrete gravity base structures‏‎ (12:27, 2 June 2015)
  79. Flare and vent disposal systems‏‎ (12:32, 2 June 2015)
  80. Offshore and subsea facilities‏‎ (12:33, 2 June 2015)
  81. Subsea systems‏‎ (12:35, 2 June 2015)
  82. Remotely operated vehicles (ROVs)‏‎ (12:39, 2 June 2015)
  83. History of offshore drilling units‏‎ (12:42, 2 June 2015)
  84. Subsea processing benefits‏‎ (12:50, 2 June 2015)
  85. Subsea processing design‏‎ (12:51, 2 June 2015)
  86. Subsea processing overview‏‎ (13:01, 2 June 2015)
  87. Subsea processing technology‏‎ (13:05, 2 June 2015)
  88. Subsea separation‏‎ (13:06, 2 June 2015)
  89. Stranded gas‏‎ (13:21, 2 June 2015)
  90. Calculating gas properties‏‎ (13:59, 2 June 2015)
  91. Compressed natural gas (CNG)‏‎ (14:01, 2 June 2015)
  92. Asphaltene precipitation‏‎ (14:02, 2 June 2015)
  93. Compliant and floating systems‏‎ (22:32, 2 June 2015)
  94. Gas to methanol‏‎ (08:45, 3 June 2015)
  95. Gas to liquids (GTL)‏‎ (08:50, 3 June 2015)
  96. Project execution of surface facilities‏‎ (08:54, 3 June 2015)
  97. Pipeline pigging‏‎ (09:08, 3 June 2015)
  98. Connate water saturation evaluation‏‎ (09:12, 3 June 2015)
  99. Estimating permeability based on grain size‏‎ (09:23, 3 June 2015)
  100. Estimating permeability based on Kozeny-Carman equation‏‎ (09:45, 3 June 2015)
  101. Estimating permeability based on surface area and water saturation‏‎ (10:03, 3 June 2015)
  102. Estimating permeability from well log data‏‎ (10:08, 3 June 2015)
  103. Estimating reservoir properties with nonseismic techniques‏‎ (10:18, 3 June 2015)
  104. Isothermal compressibility of gases‏‎ (10:34, 3 June 2015)
  105. Isothermal compressibility of oil‏‎ (10:40, 3 June 2015)
  106. Reservoir pressure and temperature‏‎ (10:53, 3 June 2015)
  107. Reservoir pressure data interpretation‏‎ (10:57, 3 June 2015)
  108. Comparison of permeability estimation models‏‎ (11:29, 3 June 2015)
  109. Geothermal reservoir characterization‏‎ (11:50, 3 June 2015)
  110. Diatomite‏‎ (12:17, 3 June 2015)
  111. Siliciclastic reservoir geology‏‎ (12:18, 3 June 2015)
  112. Reservoir simulation applications‏‎ (12:29, 3 June 2015)
  113. Layer thickness evaluation‏‎ (12:41, 3 June 2015)
  114. Lithology and rock type determination‏‎ (12:47, 3 June 2015)
  115. Reservoir geology‏‎ (12:51, 3 June 2015)
  116. Geology impact on immiscible gas displacement‏‎ (13:17, 3 June 2015)
  117. Geology in reservoir models‏‎ (13:50, 3 June 2015)
  118. Seismic profiling‏‎ (13:55, 3 June 2015)
  119. Seismic wave propagation‏‎ (14:02, 3 June 2015)
  120. Acoustic velocity dispersion and attenuation‏‎ (14:07, 3 June 2015)
  121. Compressional and shear velocities‏‎ (14:12, 3 June 2015)
  122. Seismic time-lapse reservoir monitoring‏‎ (14:17, 3 June 2015)
  123. Crude oil characterization‏‎ (14:58, 3 June 2015)
  124. Solution gas drive reservoirs‏‎ (15:01, 3 June 2015)
  125. Gas properties‏‎ (15:03, 3 June 2015)
  126. Gas viscosity‏‎ (15:06, 3 June 2015)
  127. Oilfield water compressibility‏‎ (15:09, 3 June 2015)
  128. Solving unsteady flow problems with Laplace transform and source functions‏‎ (16:58, 3 June 2015)
  129. Pore fluid properties‏‎ (10:18, 4 June 2015)
  130. Quaternary phase diagrams‏‎ (10:20, 4 June 2015)
  131. Natural gas properties‏‎ (10:28, 4 June 2015)
  132. Oil fluid characteristics‏‎ (11:29, 4 June 2015)
  133. Oil fluid properties‏‎ (11:40, 4 June 2015)
  134. Oil formation volume factor‏‎ (11:51, 4 June 2015)
  135. Oil viscosity‏‎ (14:16, 4 June 2015)
  136. Phase behavior in reservoir simulation‏‎ (15:06, 4 June 2015)
  137. Phase behavior of water and hydrocarbon systems‏‎ (15:09, 4 June 2015)
  138. Phase diagrams‏‎ (15:11, 4 June 2015)
  139. Phase diagrams for EOR processes‏‎ (15:16, 4 June 2015)
  140. Phase diagrams for reservoir fluid systems‏‎ (15:18, 4 June 2015)
  141. Phase diagrams of miscible processes‏‎ (15:21, 4 June 2015)
  142. Real gases‏‎ (15:28, 4 June 2015)
  143. Ternary phase diagrams‏‎ (15:32, 4 June 2015)
  144. Thermodynamics and phase behavior‏‎ (15:35, 4 June 2015)
  145. Vapor pressure‏‎ (15:37, 4 June 2015)
  146. Compositional simulation of miscible processes‏‎ (15:42, 4 June 2015)
  147. Equations of state for miscible processes‏‎ (15:45, 4 June 2015)
  148. Phase behavior of mixtures‏‎ (15:49, 4 June 2015)
  149. Phase behavior of pure fluids‏‎ (15:51, 4 June 2015)
  150. Interfacial tension‏‎ (16:05, 4 June 2015)
  151. Equations of state‏‎ (16:08, 4 June 2015)
  152. Phase characterization of in-situ fluids‏‎ (18:26, 4 June 2015)
  153. Thermodynamic models for wax precipitation‏‎ (18:36, 4 June 2015)
  154. Compaction drive reservoirs‏‎ (18:40, 4 June 2015)
  155. Compressive strength of rocks‏‎ (18:46, 4 June 2015)
  156. Emulsion treating methods‏‎ (18:59, 4 June 2015)
  157. Fluid flow in horizontal wells‏‎ (19:01, 4 June 2015)
  158. Fluid flow in hydraulically fractured wells‏‎ (19:04, 4 June 2015)
  159. Fluid friction‏‎ (19:13, 4 June 2015)
  160. Mathematics of fluid flow‏‎ (19:17, 4 June 2015)
  161. Measurements affecting reservoir fluid sampling‏‎ (19:19, 4 June 2015)
  162. Nodal analysis‏‎ (19:21, 4 June 2015)
  163. Vector analysis of fluid flow‏‎ (19:22, 4 June 2015)
  164. Pressure transient testing‏‎ (08:33, 8 June 2015)
  165. Foam behavior in porous media‏‎ (08:45, 8 June 2015)
  166. Numerical methods analysis of fluid flow‏‎ (08:54, 8 June 2015)
  167. Permeability estimation in tight gas reservoirs‏‎ (09:02, 8 June 2015)
  168. Single phase permeability‏‎ (09:28, 8 June 2015)
  169. Solving unsteady flow problems with Green's and source functions‏‎ (09:29, 8 June 2015)
  170. Source function solutions of the diffusion equation‏‎ (09:32, 8 June 2015)
  171. Transient analysis mathematics‏‎ (09:33, 8 June 2015)
  172. Pressure drop evaluation along pipelines‏‎ (09:38, 8 June 2015)
  173. Fluid flow in PCP systems‏‎ (09:40, 8 June 2015)
  174. Diverting spinner flowmeter‏‎ (09:40, 8 June 2015)
  175. Horizontal well applications in steamflooding‏‎ (09:49, 8 June 2015)
  176. Microscopic efficiency of waterflooding‏‎ (09:54, 8 June 2015)
  177. Electrical engineering considerations for electromagnetic heating of oil‏‎ (10:03, 8 June 2015)
  178. Electromagnetic heating of oil‏‎ (10:14, 8 June 2015)
  179. Electromagnetic heating process‏‎ (10:16, 8 June 2015)
  180. Heating oil emulsions‏‎ (10:17, 8 June 2015)
  181. Sandstone reservoir with combination drives and injection‏‎ (10:18, 8 June 2015)
  182. Areal displacement in a waterflood‏‎ (10:26, 8 June 2015)
  183. Low permeability sandstone waterflood‏‎ (10:26, 8 June 2015)
  184. Macroscopic displacement efficiency of a linear waterflood‏‎ (10:28, 8 June 2015)
  185. Vertical displacement in a waterflood‏‎ (10:46, 8 June 2015)
  186. Sandstone reservoir with strong waterdrive and crestal gas injection‏‎ (11:39, 8 June 2015)
  187. Solution gas driven sandstone reservoir with water and gas injection‏‎ (11:39, 8 June 2015)
  188. Sandstone field with waterflood, gas and miscible solvent injection‏‎ (11:40, 8 June 2015)
  189. Field performance of polymer waterflooding‏‎ (11:43, 8 June 2015)
  190. Carbonate reservoir with waterflood and miscible injection‏‎ (11:44, 8 June 2015)
  191. Immiscible gas injection monitoring‏‎ (14:56, 8 June 2015)
  192. Displacement efficiency of immiscible gas injection‏‎ (07:43, 9 June 2015)
  193. Gas cap drive reservoirs‏‎ (07:46, 9 June 2015)
  194. Gravity stable miscible gas injection in steeply dipping sandstone reservoir‏‎ (07:47, 9 June 2015)
  195. Immiscible gas injection case studies‏‎ (07:47, 9 June 2015)
  196. Immiscible gas injection in oil reservoirs‏‎ (07:52, 9 June 2015)
  197. Immiscible gas injection performance‏‎ (08:22, 9 June 2015)
  198. Swanson River field‏‎ (08:26, 9 June 2015)
  199. Vertical or gravity drainage gas displacement‏‎ (08:32, 9 June 2015)
  200. Chamber lift‏‎ (08:38, 9 June 2015)
  201. Profiling oil production under WAG recovery‏‎ (08:38, 9 June 2015)
  202. Residual gas saturation testing‏‎ (08:39, 9 June 2015)
  203. Monetizing stranded gas‏‎ (08:52, 9 June 2015)
  204. Residual oil evaluation using single well chemical tracer test‏‎ (08:54, 9 June 2015)
  205. Conformance problems‏‎ (08:59, 9 June 2015)
  206. Evaluation of conformance improvement gels‏‎ (09:22, 9 June 2015)
  207. Field applications of conformance improvement foams‏‎ (09:24, 9 June 2015)
  208. Field applications of resin for conformance improvement‏‎ (09:30, 9 June 2015)
  209. Gel breakers‏‎ (09:30, 9 June 2015)
  210. Gels for conformance improvement‏‎ (09:34, 9 June 2015)
  211. Field applications of conformance improvement gel treatments‏‎ (09:39, 9 June 2015)
  212. Placement of conformance improvement gels‏‎ (09:48, 9 June 2015)
  213. Foams as blocking agents‏‎ (09:56, 9 June 2015)
  214. Foams for conformance improvement‏‎ (10:01, 9 June 2015)
  215. Conformance improvement‏‎ (10:04, 9 June 2015)
  216. Preformed particle gel for conformance-improvement‏‎ (10:06, 9 June 2015)
  217. Steam delivery systems for EOR‏‎ (10:23, 9 June 2015)
  218. Steamflood heat management‏‎ (10:50, 9 June 2015)
  219. Operating practices for in-situ combustion‏‎ (10:56, 9 June 2015)
  220. Modeling fluid flow with electromagnetic heating‏‎ (11:01, 9 June 2015)
  221. Predicting behavior of in-situ combustion‏‎ (11:09, 9 June 2015)
  222. Predicting performance of in-situ combustion‏‎ (11:10, 9 June 2015)
  223. Thermal recovery by steam injection‏‎ (11:14, 9 June 2015)
  224. Disproportionate permeability reduction‏‎ (12:09, 9 June 2015)
  225. Polymer impact on permeability‏‎ (12:15, 9 June 2015)
  226. Polymer waterflooding design and implementation‏‎ (12:22, 9 June 2015)
  227. Sandstone reservoir with polymer injection‏‎ (12:22, 9 June 2015)
  228. Polymers for conformance improvement‏‎ (12:24, 9 June 2015)
  229. Drilling safety‏‎ (16:36, 11 June 2015)
  230. Enriched hydrocarbon miscible flooding case studies‏‎ (09:37, 12 June 2015)
  231. Scaleup to full field miscible flood behavior‏‎ (09:40, 12 June 2015)
  232. Nitrogen miscible flooding case studies‏‎ (09:43, 12 June 2015)
  233. Miscible flooding‏‎ (09:49, 12 June 2015)
  234. Designing a miscible flood‏‎ (09:50, 12 June 2015)
  235. CO2 miscible flooding case studies‏‎ (09:52, 12 June 2015)
  236. Boundary effects in diagnostic plots‏‎ (10:13, 12 June 2015)
  237. Challenges with probabilistic models‏‎ (10:13, 12 June 2015)
  238. Design of uncertainty models‏‎ (10:14, 12 June 2015)
  239. Diagonalizing the permeability tensor‏‎ (10:15, 12 June 2015)
  240. High performance computing and reservoir simulation‏‎ (10:32, 12 June 2015)
  241. Material balance in waterdrive reservoirs‏‎ (10:39, 12 June 2015)
  242. Reservoir simulation linear equation solver‏‎ (11:07, 12 June 2015)
  243. Upscaling of grid properties in reservoir simulation‏‎ (11:10, 12 June 2015)
  244. Waterdrive reservoirs‏‎ (12:11, 12 June 2015)
  245. Streamline simulation‏‎ (12:20, 12 June 2015)
  246. Assessing reservoir management‏‎ (12:27, 12 June 2015)
  247. Borehole gravimetry‏‎ (12:28, 12 June 2015)
  248. Estimating horizontal well productivity‏‎ (12:29, 12 June 2015)
  249. Gas well deliverability‏‎ (12:40, 12 June 2015)
  250. Isochronal tests for gas wells‏‎ (12:44, 12 June 2015)

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)