Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information
Use the search box at upper right to find content of interest.
Use the Glossary to find terms and definitions. Glossary If searching for a specific term please type in "Glossary:" before the desired term in the search box.
Use the Help to locate guides, videos, and slideshows to explain editing.
PetroWiki is a living document and therefore the content should be enhanced to include newer technologies and current information.
Share your knowledge with others and help update PetroWiki at the same time! You can't "break" the wiki.
Follow these basic steps to get started:
Things to know:
Design for decommissioning (D4D)
The D4D Database provides feedback from late life and abandonment operations. It provides practical guidance to engineers when designing new facilities or modifying existing facilities
The challenges and issues encountered at the end of a facility's life may not be foreseen or correctly considered during the design phase. This lack of attention can make the eventual decommissioning work more technically challenging and costly. The purpose of the database is to identify decommissioning issues based on real industry lessons learnt and translate these into potential solutions which could be implemented in future designs. Read more...
PetroWiki was created from the seven volume Petroleum Engineering Handbook (PEH) published by the Society of Petroleum Engineers (SPE). PetroWiki preserves the PEH content in unaltered form (page names that start with PEH:), while allowing SPE's membership to update and expand content from the published version. Pages that do not have PEH: at the beginning may have started with content from the PEH, but have been modified over time by contributors to the wiki. Disclaimer