You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Multilateral completions: Difference between revisions

PetroWiki
Jump to navigation Jump to search
m (Minor grammar edits)
m (Reverted edits by Victorianielsen (talk) to last revision by Artur Latypov (Arturlatypov))
Line 1: Line 1:
See Creating quality topic pages([http://petrowiki.org/Help:Creating_quality_topic_pages http://petrowiki.org/Help:Creating_quality_topic_pages]) for full details on how to make this a quality topic page
Multilateral completion systems allow the drilling and completion of multiple lateral boreholes within a single mainbore. This allows for alternative well-construction strategies for vertical, inclined, horizontal, and extended-reach wells. Multilaterals can be constructed in both new and existing oil and gas wells. A typical installation includes two laterals; the number of laterals would be determined by:
 
*The number of targets
*Depths/pressures
*Risk analysis
*Well-construction parameters.
 
== Advantages of multilateral completion systems ==
 
Multilateral systems combine the advantages of horizontal-drilling techniques with the ability to achieve multiple target zones. The advantages of horizontal drilling include:
 
*Higher production indices
*The possibility of draining relatively thin formation layers
*Decreased water and gas coning
*Increased exposure to natural fracture systems in the formation
*Better sweep efficiencies.
 
Depending on the type of multilateral design used, the target zones can be isolated and produced independently—or produced simultaneously, if commingled production is allowed or if a parallel string completion is used.
 
Installation of intelligent completion into multilateral well gives ability to monitor and control each leg separately which gives benefits of having several wells at cost of one. 
 
== TAML codes ==
<div>The various types of multilateral junctions have been categorized by the Technology Advancement of MultiLaterals (TAML), a group of operators and suppliers with experience in developing multilateral technology. The TAML system for multilateral junction&nbsp;classification is based on support and hydraulic integrity provided at the junction. There are six industry levels defined by TAML. This categorization system makes it easier for operators to recognize and compare the functionality and risk-to-reward evaluations of one multilateral completion design to another. As the TAML level increases, so does the complexity and cost of the system.<ref name="r1">Hogg, C. 1997. Comparison of Multilateral Completion Scenarios and Their Application. Presented at the Offshore Europe, Aberdeen, United Kingdom, 9-12 September. SPE-38493-MS. http://dx.doi.org/10.2118/38493-MS.</ref></div>
=== TAML level 1 ===
 
Basic multilateral junction consists of an openhole main bore with one or multiple drainage legs (or laterals) exiting from it ('''Fig 1'''). The junction in this design is left with no mechanical support or hydraulic isolation. The integrity of the junction is dependent on natural borehole stability, but it is possible to land a slotted liner in the lateral or the main bore to help keep the hole open during production. The production from a Level 1 system must be commingled, and zonal isolation or selective control of production is not possible. Re-entry into either the main bore or the lateral may be difficult or impossible should well intervention be required in the future.
 
<gallery widths="300px" heights="200px">
File:TAML1.jpg|'''Fig. 1—TAML Level 1: openhole main bore and lateral; unsupported slotted liner or screen may be set in lateral or main bore.'''
</gallery>
 
=== TAML level 2 ===
 
Level 2 junction consists of cased and cemented main bore with uncased lateral&nbsp;('''Fig 2'''). The cased main bore minimizes the chances of borehole collapse and provides a means of hydraulic isolation between zones. As with Level 1, there is no actual mechanical support of the lateral junction, but it is possible to run a slotted liner into the lateral to maintain borehole stability.
 
<gallery widths="375px" heights="300px">
File:TAML2.jpg|'''Fig. 2—TAML Level 2: cased and cemented main bore with an openhole lateral; an unsupported slotted liner or screen may be installed in the lateral.'''
</gallery>
 
=== TAML level 3 ===
 
The Level 3 junction&nbsp;uses a cased and cemented main bore with an openhole lateral ('''Fig 3'''). This system offers mechanical support of the lateral junction, and&nbsp;provides access into both laterals.
 
<gallery widths="375px" heights="300px">
File:TAML3.jpg|'''Fig. 3—TAML Level 3: cased and cemented main bore with an openhole lateral, offering mechanical support of the junction.'''
</gallery>
 
=== TAML level 4 ===
 
Level 4 junction offers both a cased and a cemented main bore and lateral ('''Fig 4'''). This gives the lateral mechanical support, but the cement itself does not offer pressure integrity at the junction. There is a potential for failure if the junction is subjected to a pressure drawdown. Zonal isolation and selectivity is possible by installing packers above and below the junction in the main bore.
 
<gallery widths="400px" heights="200px">
File:TAML4.jpg|'''Fig. 4—TAML Level 4: cased and cemented main bore and lateral; cemented lateral provides mechanical support, but the cement does not provide pressure integrity for the junction.'''
</gallery>
 
=== TAML level 5 ===
 
The Level 5 multilateral junction has both cased main bore and lateral, which offers great level of mechanical integrity ('''Fig 5'''). Pressure integrity has been achieved by using completion&nbsp;to isolate the junction. This junction type offers full access to both the main bore and the lateral. The zones can be produced independent of one another, or the completion can be designed to allow them to be commingled.
 
<gallery widths="375px" heights="300px">
File:TAML 5.jpg|'''Fig. 5. TAML Level 5: cased main bore and lateral; pressure integrity across the junction is achieved through use of completion.'''
</gallery>
 
=== TAML level 6 ===
 
In the Level 6 multilateral system, both mechanical and pressure integrity are achieved by using the casing to seal the junction ('''Fig 6'''). Cementing the junction, as was done in the Level 4 system, is not acceptable. The Level 6 system uses a premanufactured junction. In one type of system, the junction is reformed downhole. TAML6 junction as of today are not considered to be viable because of significant loss of ID and complexity of installation. Contemporary TAML5 systems offer higher pressure ratings and IDs which almost made TAML 6 junctions expired technology.
 
<gallery widths="200px" heights="400px">
File:TAML6.JPG|'''Fig. 6—TAML Level 6: mechanical and pressure integrity at the junction is achieved by using casing to seal the junction.'''
</gallery>
 
== References ==
 
<references />
 
== Noteworthy papers in OnePetro ==
 
== External links ==
 
[http://taml-intl.org/wp-content/uploads/2012/03/tamlcomplexity.pdf Technology Advancement of MultiLaterals] (TAML)
 
== General references ==
 
Allen, T. and Roberts, A.P. 1993. ''Production Operations'', fourth edition, I and II.
 
Factors and Conditions Which Cause Seal Assemblies Used in Downhole Enviornments to Get Stuck. Baker Oil Tools—Engineering Tech Data Paper No. CS007.
 
Patton, L.D. and Abbott, W.A. 1985. ''Well Completions and Workovers: The Systems Approach'', second edition, 57–67. Dallas: Energy Publications.
 
== See also ==
 
[[Completion_systems|Completion systems]]
 
[[Combination_completions|Combination completions]]
 
[[PEH:Completion_Systems]]
 
== Category ==
[[Category:2 Well completion]] [[Category:YR]]

Revision as of 09:49, 31 October 2016

Multilateral completion systems allow the drilling and completion of multiple lateral boreholes within a single mainbore. This allows for alternative well-construction strategies for vertical, inclined, horizontal, and extended-reach wells. Multilaterals can be constructed in both new and existing oil and gas wells. A typical installation includes two laterals; the number of laterals would be determined by:

  • The number of targets
  • Depths/pressures
  • Risk analysis
  • Well-construction parameters.

Advantages of multilateral completion systems

Multilateral systems combine the advantages of horizontal-drilling techniques with the ability to achieve multiple target zones. The advantages of horizontal drilling include:

  • Higher production indices
  • The possibility of draining relatively thin formation layers
  • Decreased water and gas coning
  • Increased exposure to natural fracture systems in the formation
  • Better sweep efficiencies.

Depending on the type of multilateral design used, the target zones can be isolated and produced independently—or produced simultaneously, if commingled production is allowed or if a parallel string completion is used.

Installation of intelligent completion into multilateral well gives ability to monitor and control each leg separately which gives benefits of having several wells at cost of one. 

TAML codes

The various types of multilateral junctions have been categorized by the Technology Advancement of MultiLaterals (TAML), a group of operators and suppliers with experience in developing multilateral technology. The TAML system for multilateral junction classification is based on support and hydraulic integrity provided at the junction. There are six industry levels defined by TAML. This categorization system makes it easier for operators to recognize and compare the functionality and risk-to-reward evaluations of one multilateral completion design to another. As the TAML level increases, so does the complexity and cost of the system.[1]

TAML level 1

Basic multilateral junction consists of an openhole main bore with one or multiple drainage legs (or laterals) exiting from it (Fig 1). The junction in this design is left with no mechanical support or hydraulic isolation. The integrity of the junction is dependent on natural borehole stability, but it is possible to land a slotted liner in the lateral or the main bore to help keep the hole open during production. The production from a Level 1 system must be commingled, and zonal isolation or selective control of production is not possible. Re-entry into either the main bore or the lateral may be difficult or impossible should well intervention be required in the future.

TAML level 2

Level 2 junction consists of cased and cemented main bore with uncased lateral (Fig 2). The cased main bore minimizes the chances of borehole collapse and provides a means of hydraulic isolation between zones. As with Level 1, there is no actual mechanical support of the lateral junction, but it is possible to run a slotted liner into the lateral to maintain borehole stability.

TAML level 3

The Level 3 junction uses a cased and cemented main bore with an openhole lateral (Fig 3). This system offers mechanical support of the lateral junction, and provides access into both laterals.

TAML level 4

Level 4 junction offers both a cased and a cemented main bore and lateral (Fig 4). This gives the lateral mechanical support, but the cement itself does not offer pressure integrity at the junction. There is a potential for failure if the junction is subjected to a pressure drawdown. Zonal isolation and selectivity is possible by installing packers above and below the junction in the main bore.

TAML level 5

The Level 5 multilateral junction has both cased main bore and lateral, which offers great level of mechanical integrity (Fig 5). Pressure integrity has been achieved by using completion to isolate the junction. This junction type offers full access to both the main bore and the lateral. The zones can be produced independent of one another, or the completion can be designed to allow them to be commingled.

TAML level 6

In the Level 6 multilateral system, both mechanical and pressure integrity are achieved by using the casing to seal the junction (Fig 6). Cementing the junction, as was done in the Level 4 system, is not acceptable. The Level 6 system uses a premanufactured junction. In one type of system, the junction is reformed downhole. TAML6 junction as of today are not considered to be viable because of significant loss of ID and complexity of installation. Contemporary TAML5 systems offer higher pressure ratings and IDs which almost made TAML 6 junctions expired technology.

References

  1. Hogg, C. 1997. Comparison of Multilateral Completion Scenarios and Their Application. Presented at the Offshore Europe, Aberdeen, United Kingdom, 9-12 September. SPE-38493-MS. http://dx.doi.org/10.2118/38493-MS.

Noteworthy papers in OnePetro

External links

Technology Advancement of MultiLaterals (TAML)

General references

Allen, T. and Roberts, A.P. 1993. Production Operations, fourth edition, I and II.

Factors and Conditions Which Cause Seal Assemblies Used in Downhole Enviornments to Get Stuck. Baker Oil Tools—Engineering Tech Data Paper No. CS007.

Patton, L.D. and Abbott, W.A. 1985. Well Completions and Workovers: The Systems Approach, second edition, 57–67. Dallas: Energy Publications.

See also

Completion systems

Combination completions

PEH:Completion_Systems

Category