You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Environment: Difference between revisions

PetroWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 43: Line 43:
== References ==
== References ==


<references /><br/>
<references />


== Noteworthy papers in OnePetro ==
== Noteworthy papers in OnePetro ==

Revision as of 11:41, 19 August 2015

In the context of E&P, environment is a subsection of HSE that focuses on the effects E&P has on the external environment. Typically,the discipline deals with those effects that occur outside the E&P footprint. Included are the effects of air emissions, waste water discharges, and disposal of waste.

Air emissions

Recently, global climate change and air quality have become increasingly important environmental concerns.[1] Consequently, there has been a rise in collaborative international efforts to reduce the concentration of greenhouse gases and criteria pollutants. Greenhouse gases include carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O), occuring naturally and as the result of human activity. Criteria pollutants include emissions of nitrogen oxide, sulfur dioxide, carbon monoxide, and total unburned hydrocarbons. Drilling contractors can play an important role in environmental stewardship by reporting carbon emissions from drilling operations, eliminating redundant emission measurements, and leading the industry in efforts to reduce these emissions.

Methane emissions

Carbon emissions

Reducing air emissions

Water use, produced water discharge and disposal

Water use and conservation

As water conservation becomes a more popular issue--in the oilfield and in other industries--many governments are creating new regulations to control the treatment, disposal, and storage of produced water. As if often the case with new regulations, the unintended consequences of the regulations can be beneficial, but sometimes worse than the original problem they were designed to alleviate. The importance of investigating the effects of regulatory requirements before implementation cannot be overstated.

Waste management

As a general trend in the industry and particularly in oil and gas activities, the problem of the waste disposal is becoming a key element of a good environmental management system.

Four principal factors contribute to this:

  • Regulatory constraints are becoming stricter, both on an international and regional level, and all countries have now environmental regulations, that are revised regularly.
  • A basic principle that has common practice, is the accountability of the producer of waste "from cradle to grave", i.e. full responsibility for wastes from time they are produced through their elimination or recovery.
  • Ever stronger pressure from the media on the theme that is ultra-sensitive and where the explicit but restrictive concept of "zero discharge" is evident.
  • Greater scientific knowledge, making it possible to really grasp the true environmental impact, especially trough increasingly effective analytical techniques, with a finely tuned ecotoxicological approach.

Wastewater disposal

Naturally ocurring radioactive materials

Oil and chemical spills

Remediation and land reclamation

After an area of land is used for petroleum production, that land must be returned to a condition as close to its original state as possible. That can prove difficult because incidents like saline or oil spills can cause soil contamination that takes time and effort to repair. 

The incorrect remediation of oil and gas field wastes can, at the very least, cause tension between the land owner and the production operator.[2] Unsatisfactory remediation could also  lead to legal conflicts, wasting natural and capital resources. Fortunately, agricultural techniques are available by which most hydrocarbon releases and adverse environmental impacts can be corrected.

Traditional hydrocarbon [TPH] remediation methods include biotreating, composting, dilution, dilution burial, road spreading, reuseable resource technology, and ultra-violet ray treatment. This paper discusses land treatment and dilution only, because of the authors' desire to provide an in-depth presentation. 

References

  1. Cadigan, M.F., Peyton, K. 2005. Baselining and Reducing Air Emissions from an Offshore Drilling Contractor's Perspective. Presented at the SPE/EPA/DOE Exploration and Production Environmental Conference, Galveston, TX, 7-9 March. http://dx.doi.org/10.2118/94432-MSDocument IDSPE-94432-MS.
  2. Deuel, L.E.E., Holliday, G.H. 2003. Hydrocarbon Impacted Soil and Waste Remediation. Presented at the SPE/EPA/DOE Exploration and Production Environmental Conference, San Antonio, TX, 10-12 March. SPE-80596-MS. http://dx.doi.org/10.2118/80596-MS.

Noteworthy papers in OnePetro

External links

See also

Category