You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Electrical heating: Difference between revisions

PetroWiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
Enhanced oil recovery methods have proven results in unconventional (e.g. heavy oil, tar sands and bitumen) reservoirs. The high viscosity in these reservoirs is a major obstacle in the extraction process. While thermal recovery methods are often considered, there are reservoirs where long - term production from conventional thermal recovery methods can damage the formation. In these cases, electrical EOR (EEOR) methods should be used.
[[Enhanced oil recovery (EOR)|Enhanced oil recovery]] methods have proven results in unconventional (e.g. heavy oil, tar sands and bitumen) reservoirs. The high viscosity in these reservoirs is a major obstacle in the extraction process. While thermal recovery methods are often considered, there are reservoirs where long - term production from conventional thermal recovery methods can damage the formation. In these cases, electrical EOR (EEOR) methods should be used.


Electrical heating is an EEOR process that works on the principle of transferring heat into the reservoir via electrical means. These methods supply electrical energy to the reservoir, heating the area and causing an increase in oil temperature. Heating up the reservoir reduces the oil viscosity thus, making it easier for materials to flow. While electrical heating is a relatively new technique, advances in the past couple of years has allowed for testing by theoretic, laboratories, and field trial research in areas including, Russia, the United States of America, Canada and other countries.<ref name=":0">Mukhametshina, A., and Martynova, E. 2013. Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications. ''J. Pet. Engineering'' '''2013,''' 476519:1-7. http://dx.doi.org/10.1155/2013/476519</ref> Focus on EEOR processes is of great importance because of the abundance of heavy oil, tar sand and bitumen reserves in Canada, Venezuela, countries of the former USSR, the United States of America and China.<ref>Salager, J.L., Briceño, M.I., and Bracho, C.L. 2001. Heavy Hydrocarbons Emulsions. In Encyclopedic Handbook of Emulsion Technology, 455-495, ed. J. Sjöblom. New York City: Dekker</ref><ref>Smalley, C. 2000. Heavy Oil and Viscous Oil. In Modern Petroleum Technology, Vol. 1 Upstream, Ch. 11, 409-435, sixth edition, ed. R.A. Dawe. New York City: Wiley & Sons Inc.</ref><ref>Layrisse, I. 1999. Heavy Oil Production in Venezuela: Historical Recap and Scenarios for Next Century. Presented at the SPE International Symposium on Oilfield Chemistry, Houston, Texas, 16-19 February 1999. SPE-53464-MS. <nowiki>http://dx.doi.org/10.2118/53464-MS</nowiki></ref>
Electrical heating is an EEOR process that works on the principle of transferring heat into the reservoir via electrical means. These methods supply electrical energy to the reservoir, heating the area and causing an increase in oil temperature. Heating up the reservoir reduces the oil viscosity thus, making it easier for materials to flow. While electrical heating is a relatively new technique, advances in the past couple of years has allowed for testing by theoretic, laboratories, and field trial research in areas including, Russia, the United States of America, Canada and other countries.<ref name=":0">Mukhametshina, A., and Martynova, E. 2013. Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications. ''J. Pet. Engineering'' '''2013,''' 476519:1-7. http://dx.doi.org/10.1155/2013/476519</ref> Focus on EEOR processes is of great importance because of the abundance of heavy oil, tar sand and bitumen reserves in Canada, Venezuela, countries of the former USSR, the United States of America and China.<ref>Salager, J.L., Briceño, M.I., and Bracho, C.L. 2001. Heavy Hydrocarbons Emulsions. In Encyclopedic Handbook of Emulsion Technology, 455-495, ed. J. Sjöblom. New York City: Dekker</ref><ref>Smalley, C. 2000. Heavy Oil and Viscous Oil. In Modern Petroleum Technology, Vol. 1 Upstream, Ch. 11, 409-435, sixth edition, ed. R.A. Dawe. New York City: Wiley & Sons Inc.</ref><ref>Layrisse, I. 1999. Heavy Oil Production in Venezuela: Historical Recap and Scenarios for Next Century. Presented at the SPE International Symposium on Oilfield Chemistry, Houston, Texas, 16-19 February 1999. SPE-53464-MS. <nowiki>http://dx.doi.org/10.2118/53464-MS</nowiki></ref>
Line 29: Line 29:
</math>            , ....................(1)
</math>            , ....................(1)


where φ is porosity of the reservoir, Sw is the water saturation and Rw is the resistivity of brine given in ohm-m. The term Rw illustrates the dependance of water resistivity on temperature and is defined as:
where φ is porosity of the reservoir, Sw is the water saturation and Rw is the resistivity of brine given in ohm-m. The term Rw illustrates the dependence of water resistivity on temperature and is defined as:


<math>R_w = \frac{R_{wt}\bigl(T_r-251.65\bigr)}{T-251.65}</math>    , ....................(2)
<math>R_w = \frac{R_{wt}\bigl(T_r-251.65\bigr)}{T-251.65}</math>    , ....................(2)
Line 74: Line 74:


==Comparison between EEOR techniques and SAGD==
==Comparison between EEOR techniques and SAGD==
All thermal recovery methods for heavy oil, tar sands and bitumen reservoirs work on the principle of thermal energy being transferred to the oil, reducing the viscosity and allowing for flow towards the production well. The most popular thermal recovery method is Steam Assisted Gravity Drainage (SAGD), followed by CSS and steam floods. While often used in unconventional reservoirs, these methods have not been yet investigated in thinner, less permeable, heterogeneous reservoirs, or connected by water. <ref name=":5" /> For this reason, electrothermal methods have attracted more attention for the difficult reservoirs where conventional thermal methods are not expected to work. <ref name=":6">Wang, J., Bryan, J. L., & Kantzas, A. (2008, January). ''Comparative Investigation of thermal processes for marginal bitumen resources.'' In International Petroleum Technology Conference. International Petroleum Technology Conference.</ref>
All thermal recovery methods for heavy oil, tar sands and bitumen reservoirs work on the principle of thermal energy being transferred to the oil, reducing the viscosity and allowing for flow towards the production well. The most popular thermal recovery method is [[Steam assisted gravity drainage|Steam Assisted Gravity Drainage (SAGD)]], followed by CSS and steam floods. While often used in unconventional reservoirs, these methods have not been yet investigated in thinner, less permeable, heterogeneous reservoirs, or connected by water. <ref name=":5" /> For this reason, electrothermal methods have attracted more attention for the difficult reservoirs where conventional thermal methods are not expected to work. <ref name=":6">Wang, J., Bryan, J. L., & Kantzas, A. (2008, January). ''Comparative Investigation of thermal processes for marginal bitumen resources.'' In International Petroleum Technology Conference. International Petroleum Technology Conference.</ref>


Li (2019) published a comparison between the EEOR and SAGD in part of his dissertation. Reservoirs with different petrophysical properties of the Athabasca McMurray oil sands in Alberta, Canada were modeled using the Computer Modeling Group (CMG) STARS on bitumen reservoirs.
Li (2019) published a comparison between the EEOR and SAGD in part of his dissertation. Reservoirs with different petrophysical properties of the Athabasca McMurray oil sands in Alberta, Canada were modeled using the Computer Modeling Group (CMG) STARS on bitumen reservoirs.
Line 93: Line 93:


#'''''Oil production rate improvements''''' - Due to a reduction in water flowing in an oil reservoir because of elimination of water injection.
#'''''Oil production rate improvements''''' - Due to a reduction in water flowing in an oil reservoir because of elimination of water injection.
#'''''Improved volumetric sweep efficiency -''''' Effective heating occuring in low permeability zones.
#'''''Improved volumetric sweep efficiency -''''' Effective heating occurring in low permeability zones.
#'''''Applicability in deep reservoirs -''''' Overcoming the limitation caused by high reservoir pressures in steam injection processes.
#'''''Applicability in deep reservoirs -''''' Overcoming the limitation caused by high reservoir pressures in steam injection processes.
#'''''Reduced energy requirements -''''' Significantly lower operating temperatures equate to reduced energy requirements.
#'''''Reduced energy requirements -''''' Significantly lower operating temperatures equate to reduced energy requirements.
Line 153: Line 153:
Due to the favorable results of electric heating, technologies for electrical heating have grown quickly. Countries like Russia, USA, Canada and China have begun utilizing these methods for oil production in their unconventional reservoirs, since the mid - 1960's. Electrical field trials continue to be underway in these areas as technologies continue to advance and improve.
Due to the favorable results of electric heating, technologies for electrical heating have grown quickly. Countries like Russia, USA, Canada and China have begun utilizing these methods for oil production in their unconventional reservoirs, since the mid - 1960's. Electrical field trials continue to be underway in these areas as technologies continue to advance and improve.
===United States of America===
===United States of America===
In 1981, Bridges et al. <ref name=":2">] J. E. Bridges, J. J. Krstansky, A. Taflove, and G. C. Sresty, “The IITRI in situ RF fuel recovery process,” ''Journal of Microwave Power'', vol. 18, no. 1, pp. 3–14, 1983.</ref> conducted field tests on tar sands in Asphalt Ridge, Utah, USA. Even though this was a pilot test, the results from electrical heating were favorable in the tar sands field. Temperatures exceeded 473K and 30-35% recovery was achieved in just 20 days. <ref name=":2" /> These results were encouraging and exceeded the expectations of researchers, continuation of heating would result in a greater continuation of hydrocarbon production. Also noted, the power loss was minimal in all of the experiments, which proved the efficiency of the heating. <ref name=":2" />
In 1981, Bridges et al. <ref name=":2">] J. E. Bridges, J. J. Krstansky, A. Taflove, and G. C. Sresty, “The IITRI in situ RF fuel recovery process,” ''Journal of Microwave Power'', vol. 18, no. 1, pp. 3–14, 1983.</ref> conducted field tests on tar sands in Asphalt Ridge, Utah, USA. Even though this was a pilot test, the results from electrical heating were favorable in the tar sands field. Temperatures exceeded 473K and 30-35% recovery was achieved in just 20 days. <ref name=":2" /> These results were encouraging and exceeded the expectations of researchers; continuation of heating would result in a greater continuation of hydrocarbon production. Also noted, the power loss was minimal in all of the experiments, which proved the efficiency of the heating. <ref name=":2" />


Kasevich et al.<ref name=":3">R.S.Kasevich,S.L.Price,D.L.Faust,andM.F.Fontaine,“Pilot testing of a radio frequency heating system for enhanced oil recovery from diatomaceous earth,” in ''Proceedings of the SPE Annual Technical Conference & Exhibition'', pp. 105–113, New Orleans, La, USA, September 1994.</ref> conducted a series of qualitative field tests in Bakersfield, California, United States of America in early 1992 to better understand EEOR methods underground. While oil production rates were not reported, Kasevich et al. successfully proved that the radio frequency producer used could efficiently focus its radiation pattern into the desired region by measuring return loss and electromagnetic radiation. <ref name=":3" />
Kasevich et al.<ref name=":3">R.S.Kasevich,S.L.Price,D.L.Faust,andM.F.Fontaine,“Pilot testing of a radio frequency heating system for enhanced oil recovery from diatomaceous earth,” in ''Proceedings of the SPE Annual Technical Conference & Exhibition'', pp. 105–113, New Orleans, La, USA, September 1994.</ref> conducted a series of qualitative field tests in Bakersfield, California, United States of America in early 1992 to better understand EEOR methods underground. While oil production rates were not reported, Kasevich et al. successfully proved that the radio frequency producer used could efficiently focus its radiation pattern into the desired region by measuring return loss and electromagnetic radiation. <ref name=":3" />

Revision as of 12:32, 28 March 2021

Enhanced oil recovery methods have proven results in unconventional (e.g. heavy oil, tar sands and bitumen) reservoirs. The high viscosity in these reservoirs is a major obstacle in the extraction process. While thermal recovery methods are often considered, there are reservoirs where long - term production from conventional thermal recovery methods can damage the formation. In these cases, electrical EOR (EEOR) methods should be used.

Electrical heating is an EEOR process that works on the principle of transferring heat into the reservoir via electrical means. These methods supply electrical energy to the reservoir, heating the area and causing an increase in oil temperature. Heating up the reservoir reduces the oil viscosity thus, making it easier for materials to flow. While electrical heating is a relatively new technique, advances in the past couple of years has allowed for testing by theoretic, laboratories, and field trial research in areas including, Russia, the United States of America, Canada and other countries.[1] Focus on EEOR processes is of great importance because of the abundance of heavy oil, tar sand and bitumen reserves in Canada, Venezuela, countries of the former USSR, the United States of America and China.[2][3][4]

Basic processes

The EEOR technique works on the basis of using electrical means (e.g. sound waves, radiofrequency (RF) waves, inductive heating and DC heating). The primary function of this processes is to increase the mobility of oil for it to flow easily towards the production well. The electrical energy that is supplied either raises the temperature of the reservoir or creates vibrations in the hydrocarbon molecules. [5]

Heating the reservoir is either done by a steam chamber or direct heating into the near-wellbore. The amount of power required for each well and formation is dictated by the production rate and operational requirements. The frequency of the electric current determines the mode of electrical heating.The alternating electric field causes polar molecules to align and relax. The molecular movement could cause a lot of heat. Electrical heating design's key goal is to reduce electrical losses while localizing heating.

The four critical components of electric heating applications are:

  1. Power conditioning unit.
  2. Power supply system.
  3. Electrode assembly.
  4. Ground return system.

Major mechanisms

Electric heating can be divided into three categories depending on the frequency of the electrical current being used. These include:

  1. Low frequency electric heating (also referred to as resistive).
  2. High frequency electric heating (commonly called microwave heating).
  3. Inductive heating (IH).

Low frequency electric heating

Fig. 1 - Schematic of low frequency electric heating mechanism. [5]

Low frequency electric heating is often referred to as Ohmic/Joule heating. Electric current is passed through the formation and due to power dissipation [5] heat is produced resulting in an increased reservoir temperature. This method is employed by using two wells drilled into the formation. One well represents the anode and the other the cathode. The electrodes are cased and effectively insulated in the adjacent formations. A potential difference is provided between the two electrodes and a current is allowed to pass through the formation. The current frequency ranges from 0.1 to 60 cycles/sec. [6] The interstitial salty water present in the formation conducts electricity well increasing hydrocarbon vibration ultimately increasing the local reservoir temperature. The heat produced near the electrodes can easily vaporize the salinated water, increasing the resistance of the conducting path and impeding heat transfer. Calculating an accurate yet optimal electrical conductivity for the formation is therefore vital in these operations.

The electrical conductivity in the formation can be calculated by the Archie and Humble's relation [5]:

, ....................(1)

where φ is porosity of the reservoir, Sw is the water saturation and Rw is the resistivity of brine given in ohm-m. The term Rw illustrates the dependence of water resistivity on temperature and is defined as:

, ....................(2)

where T is the initial temperature of reservoir in Kelvin while Tr is the reservoir temperature after passage of electric current through it.  

Fig. 2 - Schematic of high frequency electric heating mechanism. [7]

High frequency electric heating

High frequency electric heating operates within frequency ranges of 300 to 300,000 MHz. Such high frequencies with short wavelengths are classified as microwaves. This is why high frequency electric heating is commonly referred to as microwave heating.

In microwave heating, microwaves interact with the water molecules present in the formation. These molecules are set into circulatory and oscillatory motion[8] generating frictional heat which then may be transferred to its neighbours (mainly the matrix and the oil) ultimately elevating the temperature of the reservoir. The extent of temperature elevation is determined by the amount of microwave energy absorbed by the oil. [9]

Shown in Fig.2., an oil reservoir is heated up under radiation of microwaves emitted from an antenna located in the wellbore and the oil is being produced to the surface through a production well.

Fig. 3 - Schematic of Inductive electric heating mechanism. [10]

Inductive heating

Inductive heating and hydrocarbons have been known since at least 1929.[11] It was not until the early 1980's, that the Fisher brothers engineered a way to implement this process for in-situ recovery on a larger scale.[12]

The frequency for inductive heating ranges from low to medium (10 kHz or more). Inductive heating generates heat near the wellbore typically in vertical wells. A large diameter coil is intertwined among the well (either vertically or horizontally) and heats the oil sands. [10] The alternating electric and magnetic fields present around the coil causes eddy currents. These eddy currents flow through the metallic materials present in the formation producing heat and raising the temperature.[5]

The increase in temperature can be calculated as follows [5]:

, ....................(3)

where and represent the density, specific heat capacity and thermal conductivity of the medium, respectively. and are the density, specific heat capacity and superficial velocity of the fluid phase. The term P is the electromagnetic power that is dissipated per unit of volume and is a function of the electric field, and the effective conductivity of the medium, , and is given by:

, ....................(4)

Additional electrical heating methods

Other recently explored methods of electrical heating include:

  1. Electromagnetic heating.
  2. Electrocarbonization.
  3. Electro-osmosis.
  4. Laser heating.
  5. Ultrasonic wave heating.
  6. Hybrid processes.

Farouq Ali et al. (2018)[10] has gone into detail of the these above explored methods. While these methods have yield viable experimental results, due to cost and logistics they are not widely used in the industry. As an example, ultrasonic wave heating has increased the recovery rate in a Western Siberia field in Russia to 10.2tons/day, an increase of 91% in hydrocarbon production. [13]

A summary and description of the electrical heating methods can be found in Fig.4. below. [9]

Fig. 4. - Summary of electrical heating methods.

Electrical heating selection

Each reservoir is unique, so understandably, different electrical techniques can be applied based on the characterization of the oil reservoir. Water saturation, salinity and frequency are all key factors in the successful implementation of electrical heating. [14]

Comparison between EEOR techniques and SAGD

All thermal recovery methods for heavy oil, tar sands and bitumen reservoirs work on the principle of thermal energy being transferred to the oil, reducing the viscosity and allowing for flow towards the production well. The most popular thermal recovery method is Steam Assisted Gravity Drainage (SAGD), followed by CSS and steam floods. While often used in unconventional reservoirs, these methods have not been yet investigated in thinner, less permeable, heterogeneous reservoirs, or connected by water. [9] For this reason, electrothermal methods have attracted more attention for the difficult reservoirs where conventional thermal methods are not expected to work. [15]

Li (2019) published a comparison between the EEOR and SAGD in part of his dissertation. Reservoirs with different petrophysical properties of the Athabasca McMurray oil sands in Alberta, Canada were modeled using the Computer Modeling Group (CMG) STARS on bitumen reservoirs.

  1. For a pay zone of 5m thickness, simulation results showed the electrical resistance heating to recover more bitumen than SAGD.[9]
  2. For a pay zone with a thick bottom water layer of 15m, SAGD methods were not useful. Electrical heating produced 14% bitumen after 14 years of production whereas SAGD methods only recovered 1%. [9]
  3. SAGD performance dramatically decreases in low permeability reservoirs. Luckily, low permeability has a small effect on the electrical resistance heating process.[9] In the simulation of a 300mD reservoir, electric heating is reported to recover 12% of bitumen, while only 2% of bitumen is produced by SAGD.[15]

An advantage that EEOR methods - specifically Microwave-Assisted Gravity Drainage (MWAGD) - have over SAGD is the speed at which heat transfer occurs. MWAGD is a rapid process, and less time consuming than the conventional thermal methods. Additionally, MWAGD does not cause any consequential damage to the formation.[16] Moreover, reservoir heterogeneity does not significantly affect the overall energy efficiency in electrical heating processes. [17]

Despite the popular use of steam based thermal recovery methods, unavoidable challenges arise. Injecting steam at temperature ranges of 200 to 250C, leads to overheating and heat loss. There are some instances where a top/bottom water or top/bottom gas cap is present in the reservoir. In these cases, steam injection processes negatively affect enhanced oil production since the steam chamber is in touch with these regions. [18] Fortunately, these challenges can be mitigated via EEOR methods.

Advantages and disadvantages of EEOR

Advantages of EEOR techniques

Electrical heating has numerous advantages over conventional thermal methods. Electrical heating works on the basis of targeting part of the reservoir instead of heating the bulk reservoir. [1] The advantage to this, is that the specific heated area can be heated up more effectively and with lower heat losses. Additionally, this proves that these techniques as more efficient and cost effective when compared to the standard EOR methods. Another major advantage of EEOR methods is its applicability in heterogeneous reservoir environments.[19] Geology or characterization is not affected by employing electrical techniques allowing for EEOR to be suitably utilized in different reservoirs having different formation depths, formation porosity and permeability, temperature, pressure and thickness.[20]

Additional advantages include[9]:

  1. Oil production rate improvements - Due to a reduction in water flowing in an oil reservoir because of elimination of water injection.
  2. Improved volumetric sweep efficiency - Effective heating occurring in low permeability zones.
  3. Applicability in deep reservoirs - Overcoming the limitation caused by high reservoir pressures in steam injection processes.
  4. Reduced energy requirements - Significantly lower operating temperatures equate to reduced energy requirements.
  5. Reduced sensitivity - No fluid injection reduces sensitivity in reservoirs containing clays.
  6. Cost reduction - Elimination of equipment associated with fluid injection and reduction in energy lowers OPEX costs.
  7. Versatility - Some EEOR methods rely on the presence of the water phase to establish ionic conduction paths of heating. Others have the ability to have the heating adjusted to accommodate any water saturation, especially for low water content. [21]
  8. Efficiency - Significantly faster operations than SAGD and other EOR methods. EEOR operates during hydrocarbon production thus avoiding a differential in reservoir and wellbore pressure, consequently avoiding formation damage.

Disadvantages of EEOR techniques

One of the most common operation problem with EEOR is the possibility of high water saturation zones in the wellbore. Most heating occurs in those zones. [10] EEOR additionally raises the temperature of rocks and other inorganic materials present in the reservoir. While this can be seen as advantageous when looking at the Athabasca oil sands in Alberta, Canada, it is disadvantageous when one considers shales. Much leakage if electric currents occur in non-productive adjacent formations.[10] It has also been reported that extensive use in crude oil reservoirs has resulted in formation damages due to the deposition of paraffin near the wellbore[22], reducing the formation permeability and ultimately decreasing oil production. EEOR methods are not environmentally friendly as they cause an increase in greenhouse gas production. [1]

Comparison of different EEOR techniques

Table 1.0: Comparisons between EEOR Techniques [23]
Electrical Enhanced Oil Recovery Method Benefits Limitations
Low Frequency
  • Suitable for reservoirs with high permeability or fractures. [5]
  • Non-uniform temperature pattern.[24] To maintain continuity the temperature must be below the boiling point of water.
  • Electrodes must be utilized which introduces the possibility of corrosion in high salt concentrated reservoirs. [5]
High Frequency
  • Propagation ability is independent of transporting material. [25]
  • Suitable for heavy oil reservoirs. [26]
  • Favourable for off-shore oil fields in terms of equipment compactness.[27]
  • Effective energy is only able to penetrate into the very near-wellbore region. [28]
  • Production must be shut down during the recovery method. [26]
  • Not suitable for water flooded reservoirs [5]
  • The source may get damaged because of the extensive heat produced. [5]
Inductive
  • High quality of the heating procedure, high efficiency and faster heating. [29]
  • Applicable on various types of reservoirs with different characteristics. [20]
  • Favourable for reservoirs whose thermal methods are not suitable.[5]
  • Useful in reservoirs with low in situ water saturation. [5]
  • Providing only limited heat around the wellbore. [28]
Ultrasonic
  • Applicable recovery method during oil production operation. [30]
  • Suitable for high water-saturated and depleted reservoirs. [5]
  • Heavy oil lying behind the water is still applicable to be produced. [26]
  • Low capacity and efficiency of ultrasonic cavitation.[31]
  • Not suitable with a slurry mixture of sand and water. [26]
  • Not recommended for unconsolidated formations with compressive strength of less than 150psi.[26]

Applications

Due to the favorable results of electric heating, technologies for electrical heating have grown quickly. Countries like Russia, USA, Canada and China have begun utilizing these methods for oil production in their unconventional reservoirs, since the mid - 1960's. Electrical field trials continue to be underway in these areas as technologies continue to advance and improve.

United States of America

In 1981, Bridges et al. [32] conducted field tests on tar sands in Asphalt Ridge, Utah, USA. Even though this was a pilot test, the results from electrical heating were favorable in the tar sands field. Temperatures exceeded 473K and 30-35% recovery was achieved in just 20 days. [32] These results were encouraging and exceeded the expectations of researchers; continuation of heating would result in a greater continuation of hydrocarbon production. Also noted, the power loss was minimal in all of the experiments, which proved the efficiency of the heating. [32]

Kasevich et al.[33] conducted a series of qualitative field tests in Bakersfield, California, United States of America in early 1992 to better understand EEOR methods underground. While oil production rates were not reported, Kasevich et al. successfully proved that the radio frequency producer used could efficiently focus its radiation pattern into the desired region by measuring return loss and electromagnetic radiation. [33]

Canada

Commercial electric heating was first introduced in the Wildmere Field in Alberta, Canada in 1986. Wildmere Field is characterized as a heavy oil field with an oil viscosity of 20 Pa.s. It was reported that primary production methods yield 0.95 tonnes/day of oil production. EEOR methods were quickly introduced in the field (eight months after initial production began) and production increased to 3.18 tonnes/day. [34] Also, another well in the same field tripled its oil production rate after the introduction of EM heating.

Two pilot tests were conducted in 1988-1989 in the Lloydminster Heavy Oil Area, Saskatchewan, Canada. While long-term heating could not be achieved (due to equipment failure and unique reservoir conditions), the technical results looked promising. Water cut drop in the field decreased by 5%, while production rate doubled. [34] This is directly related to the electric heating effects and improvement of oil mobility.

References

  1. 1.0 1.1 1.2 Mukhametshina, A., and Martynova, E. 2013. Electromagnetic Heating of Heavy Oil and Bitumen: A Review of Experimental Studies and Field Applications. J. Pet. Engineering 2013, 476519:1-7. http://dx.doi.org/10.1155/2013/476519
  2. Salager, J.L., Briceño, M.I., and Bracho, C.L. 2001. Heavy Hydrocarbons Emulsions. In Encyclopedic Handbook of Emulsion Technology, 455-495, ed. J. Sjöblom. New York City: Dekker
  3. Smalley, C. 2000. Heavy Oil and Viscous Oil. In Modern Petroleum Technology, Vol. 1 Upstream, Ch. 11, 409-435, sixth edition, ed. R.A. Dawe. New York City: Wiley & Sons Inc.
  4. Layrisse, I. 1999. Heavy Oil Production in Venezuela: Historical Recap and Scenarios for Next Century. Presented at the SPE International Symposium on Oilfield Chemistry, Houston, Texas, 16-19 February 1999. SPE-53464-MS. http://dx.doi.org/10.2118/53464-MS
  5. 5.00 5.01 5.02 5.03 5.04 5.05 5.06 5.07 5.08 5.09 5.10 5.11 5.12 Mohsin Rehman, M., and Meribout, M. 2012. Conventional versus electrical enhanced oil recovery: a review. J Petrol Explor Prod Technol 2:157-167
  6. Kern, L., 1974. Method of Producing Bitumen from a Subterranean Tar Sand Formation. U.S. Patent 3,848,671.
  7. Chhetri AB, Islam MR (2008) A critical review of electromag- netic heating for enhanced oil recovery. Pet Sci Technol 26(14):1619–1631
  8. Okassa FD, Godi A, De Simoni M, Manotti M, Maddinelli G (2010) A nonconventional EOR technology using RF/MW heating coupled with a new patented well/reservoir interface. In: SPE annual tech- nical conference and exhibition. Society of Petroleum Engineers
  9. 9.0 9.1 9.2 9.3 9.4 9.5 9.6 Li, D. (2019). Comparative Evaluation of Electrical Heating Methods for Oil Sand Reservoirs (Unpublished doctoral thesis). University of Calgary, Calgary, AB. http://hdl.handle.net/1880/110916
  10. 10.0 10.1 10.2 10.3 10.4 Ali, S. M., and B.. Bayestehparvin. "Electrical Heating — Doing the Same Thing Over and Over Again …." Paper presented at the SPE Canada Heavy Oil Technical Conference, Calgary, Alberta, Canada, March 2018. doi: https://doi.org/10.2118/189724-MS
  11. Henry, I.W., 1929. Process and Apparatus for the production, from Hydrocarbon Material, of Gasses or Liquids of Changed Molecular Weight. U.S. Patent 321,910.
  12. Fisher, S.T., 1981. Induction Heating of Oil Shale In Situ: Eddy Currents vs Displacement Currents. In Situ;(United States), 5(3), pp. 221–237.
  13. Abramov VO, Abramova AV, Bayazitov VM, Marnosov AV, Kuleshov SP, Gerasin AS (2016) Selective ultrasonic treatment of perfora- tion zones in horizontal oil wells for water cut reduction. Appl Acoust 103:214–220
  14. Eskandari S, Jalalalhosseini S, Mortezazadeh E (2015) Microwave heating as an enhanced oil recovery method—potentials and effective parameters. Energy Sources Part A Recovery Util Environ Effects 37(7):742–749
  15. 15.0 15.1 Wang, J., Bryan, J. L., & Kantzas, A. (2008, January). Comparative Investigation of thermal processes for marginal bitumen resources. In International Petroleum Technology Conference. International Petroleum Technology Conference.
  16. Jha, K. N., & Chakma, A. (1999). Heavy-oil recovery from thin pay zones by electromagnetic heating. Energy Sources, 21(1-2), 63-73. Heavy Oil Conference and Exhibition. Society of Petroleum Engineers
  17. Rangel-German, E. R., Schembre, J., Sandberg, C., & Kovscek, A. R. (2004). Electrical-heating- assisted recovery for heavy oil. Journal of Petroleum Science and Engineering, 45(3-4), 213-231.
  18. Wacker, B., Karmeileopardus, D., Trautmann, B., Helget, A., & Torlak, M. (2011, January). Electromagnetic Heating for In-situ Production of heavy oil and bitumen Reservoirs. In Canadian Unconventional Resources Conference. Society of Petroleum Engineers.
  19. Carrizales M, Lake LW (2009) Two-dimensional COMSOL simulation of heavy-oil recovery by electromagnetic heating. In: COMSOL conference held in Boston, Massachusetts, USA
  20. 20.0 20.1 Oliveira H, Barillas JL et al (2009) Energetic optimization to heavy oil recovery by electromagnetic resistive heating (ERH). In: SPE Latin American and Caribbean Petroleum Engineering Conference, Colombia
  21. Sresty, G.C., Dev, H., Snow, R.H. and Bridges, J.E., 1986. Recovery of Bitumen from Tar Sand Deposits with the Radio Frequency Process. SPE Reservoir Engineering, 1(01), pp. 85–94.
  22. Mohsin M, Meribout M (2015) An extended model for ultrasonic-based enhanced oil recovery with experimental validation. Ultrason Sonochem 23:413–423
  23. Shafiai, S.H., Gohari, A. Conventional and electrical EOR review: the development trend of ultrasonic application in EOR. J Petrol Explor Prod Technol 10, 2923–2945 (2020). https://doi.org/10.1007/s13202-020-00929-x
  24. Saeedfar A, Lawton D, Osadetz K (2016) Directional RF heating for heavy oil recovery using antenna array beam-forming. In: SPE Canada heavy oil technical conference. Society of Petroleum Engineers
  25. Carrizales MA, Lake L, Johns RT (2008) Production improvement of heavy-oil recovery by using electromagnetic heating. In: SPE annual technical conference and exhibition. Society of Petroleum Engineers
  26. 26.0 26.1 26.2 26.3 26.4 Hasibuan, M.Y.; Regina, S.; Wahyu, R.; Situmorang, D.; Azmi, F.; Syahputra, R.; Batubara, L.P.Y.; Prabowo, F.; Setiawan, A.; Afin, M.F.; Afdhol, M.K.; Erfando, T. Electrical Heating for Heavy Oil: Past, Current, and Future Prospect. Preprints 2020, 2020010115 (doi: 10.20944/preprints202001.0115.v1).
  27. Bientinesi M, Petarca L, Cerutti A, Bandinelli M, De Simoni M, Manotti M, Maddinelli G (2013) A radiofrequency/microwave heating method for thermal heavy oil recovery based on a novel tight-shell conceptual design. J Pet Sci Eng 107:18–30
  28. 28.0 28.1 Hasanvand MZ, Golparvar A (2014) A critical review of improved oil recovery by electromagnetic heating. Pet Sci Technol 32(6):631–637
  29. Lucía Ó, Domínguez A, Sarnago H, Burdío JM (2018) Induction heat- ing. Control Power Electron Convert Syst Chapter 21(2):265–287
  30. Sun R, Liang C, Liu J, Lin L, Xiong Q, Wu S (2011) Effect of ultra- sonic treatment on damage relieving of porous media. In: 2011 international conference on electrical and control engineering (ICECE). IEEE
  31. Wan C, Wang R, Zhou W, Li L (2019) Experimental study on viscosity reduction of heavy oil by hydrogen donors using a cavitating jet. RSC Adv 9(5):2509–2515
  32. 32.0 32.1 32.2 ] J. E. Bridges, J. J. Krstansky, A. Taflove, and G. C. Sresty, “The IITRI in situ RF fuel recovery process,” Journal of Microwave Power, vol. 18, no. 1, pp. 3–14, 1983.
  33. 33.0 33.1 R.S.Kasevich,S.L.Price,D.L.Faust,andM.F.Fontaine,“Pilot testing of a radio frequency heating system for enhanced oil recovery from diatomaceous earth,” in Proceedings of the SPE Annual Technical Conference & Exhibition, pp. 105–113, New Orleans, La, USA, September 1994.
  34. 34.0 34.1 H. L. Spencer, “Electromagnetic Oil Recovery, Ltd,” Calgary, Canada, 1987.

See also

Electromagnetic heating of oil

Electromagnetic heating process

Production Optimization Through Intelligent Multilateral Wells in Heavy Oil Fields via Electrical Heating

Experimental and Numerical Modeling of Heavy-Oil Recovery by Electrical Heating