You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Drilling problems

PetroWiki
Jump to navigation Jump to search

It is almost certain that problems will occur while drilling a well, even in very carefully planned wells. For example, in areas in which similar drilling practices are used, hole problems may have been reported where no such problems existed previously because formations are nonhomogeneous. Therefore, two wells near each other may have totally different geological conditions.

Types of drilling problems

In well planning, the key to achieving objectives successfully is to design drilling programs on the basis of anticipation of potential hole problems rather than on caution and containment. Drilling problems can be very costly. The most prevalent drilling problems include:

Understanding and anticipating drilling problems, understanding their causes, and planning solutions are necessary for overall-well-cost control and for successfully reaching the target zone.

See also

Drilling induced formation damage

PEH:Drilling Problems and Solutions