You must log in to edit PetroWiki. Help with editing
Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information
Category:YR
Jump to navigation
Jump to search
This category was created to show topic pages that have references
Pages in category "YR"
The following 200 pages are in this category, out of 413 total.
(previous page) (next page)H
I
L
M
- Materials for water treating equipment
- Matrix acidizing
- Mature fields
- Measurement while drilling (MWD)
- Sandbox:Mercury production with gas
- Metallurgy for downhole equipment
- Methods to determine pore pressure
- Microbial exploration technology
- Mixing of produced water
- Modeling geothermal reservoirs
- Modeling tight gas reservoirs
- Models for wax deposition in pipelines
- Models for wellbore stability
- Modified isochronal tests for gas wells
- MODU riser and mooring systems
- MODU selection
- Monte Carlo simulation
- Multilateral completions
- Multilateral wells
O
- Offshore decommissioning
- Oil and gas separators
- Oil demulsification
- Oil demulsifier selection and optimization
- Oil emulsions
- Oil well performance
- Oilfield water sampling
- Openhole gravel packing
- Operation of sucker-rod lift systems
- Operational considerations of emulsion treating
- Overpressure prediction using acoustic logging
P
- Packer standards and classifications
- Packers
- Passive seismic monitoring
- PCP system components
- PCP system design
- PCP system operations
- PCP systems for directional and horizontal wells
- PCP systems for gassy wells
- PCP systems for high sand cut wells
- PCP systems for high viscosity oil production
- PCP systems for hostile fluid conditions
- PDC bit classification
- Perforating
- Perforating design
- Perforating equipment
- Perforating methods
- PetroWiki Workgroup Test Page
- Planning and design of well to well tracer tests
- Plunger design considerations and selection
- Plunger lift
- Plunger lift applications
- Plunger lift design and models
- Plunger lift installation and maintenance
- Pore fluid effects on rock mechanics
- Pore pressure prediction using seismic
- Portfolio analysis
- Post-fracture well behavior
- Predicting hydrate formation
- Predicting rock properties
- Predicting sand production
- Prepacking perforations with gravel
- Preparing for fluid sampling
- Preventing formation of hydrate plugs
- Probability and uncertainty analysis
- Problems with deterministic models
- Produced oilfield water
- Produced water compressibility
- Produced water formation volume factor
- Produced water properties
- Producing crude oil from algae
- Production enhancement of geothermal wells
- Production logging
- Production system
- Progressing cavity pump (PCP) systems
- Propping agents and fracture conductivity
- Prudhoe Bay field
- Pseudo steady-state
R
- Radioactive gas tracers
- Radioactive water tracers
- Real options analysis
- Recognizing naturally fractured reservoirs
- Recommended methods for safety analysis
- Recommended SI units and conversion factors
- Recycling hydraulic fracturing wastewater
- Relative permeability in shale gas
- Relief valves and relief systems
- Remedial treatment for asphaltene precipitation
- Remediating wax deposition
- Removing hydrocarbons from water
- Removing solids from water
- Reserves estimation in tight gas reservoirs
- Reserves estimation of coalbed methane
- Reserves estimation of fractured reservoirs
- Reserves estimation of geopressured oil and gas
- Reserves estimation of heavy oil
- Reserves estimation of shale gas
- Reserves estimation of thin oil columns
- Reserves estimation of tight gas reservoirs
- Reservoir inflow performance
- Resin treatment for conformance improvement
- Resource classification
- Resources and reserves models
- Riserless interval
- Risk and decision analysis
- Risk-based casing design
- Robotics
- Rock acoustic velocities and in-situ stress
- Rock acoustic velocities and porosity
- Rock acoustic velocities and pressure
- Rock acoustic velocities and temperature
- Rock density and porosity
- Rock failure relationships
- Rock mechanical properties
- Rock moduli boundary constraints
- Rock strength from log parameters
- Rock type influence on permeability
- Rock types
- Rod and tubing design for PCP systems
- Roller cone bit classification
- Roller cone bit design
S
- Safety systems
- Sampling and analysis of produced water
- Sampling and analyzing emulsions
- Sand control
- Sand control in horizontal and deviated wells
- Sand control techniques
- Seal chamber section
- Second law of thermodynamics
- Seismic monitoring of hydraulic fractures
- Separator process control
- Separator sizing
- SI metric conversion factors
- Simulation of single well chemical tracer tests
- Single well chemical tracer test
- Slotted liners and wire wrapped screens
- Sour gas sweetening
- Spacers and flushers in cementing
- Spatial statistics
- Specialty cements
- Statistical concepts
- Statistical concepts in risk analysis
- Statistical data correlations in tight gas reservoirs
- Strength of casing and tubing
- Stress impact on rock properties
- Stress strain relationships in rocks
- Stuck pipe
- Subsea completion systems
- Subsurface equipment for sucker-rod lift
- Sucker rods
- Sucker-rod lift
- Sucker-rod pumping units
- Surface equipment for sucker rod lift
- Surface sampling of reservoir fluids
- Surge pressure prediction for wellbore flow
- Suspended solids in produced water
- Sustainability
- Sweep pills in hole cleanup for cementing
T
- Tight gas drilling and completion
- Tight gas reservoirs
- Time value of money
- Tracer flow in porous reservoir rock
- Tracer testing in geothermal reservoirs
- Tubing
- Tubing changes from pressure and temperature
- Tubing design factors
- Tubing inspection and handling
- Types of gels used for conformance improvement