Category:YR
This category was created to show topic pages that have references
Pages in category "YR"
The following 200 pages are in this category, out of 413 total.
(previous page) (next page)A
- Acid additives
- Acid fracturing
- Acid placement and coverage
- Acid treatment design
- Acidizing candidates
- Acidizing horizontal wells
- Acidizing preparations
- Acidizing safety and environmental protection
- Acoustic logging while drilling
- Acquiring bottomhole pressure and temperature data
- Additional causes of formation damage
- Air drilling
- Alternate PCP system configurations
- Artificial lift selection methods
- Associated and nonassociated gas
- Authority for expenditures (AFE)
B
C
- Calculation methods for directional survey
- Carbonate reservoir geology
- Cased hole completions
- Casing and tubing
- Casing collar locator
- Casing drilling
- Casing inspection logs
- Casing-annulus-flow installation design
- CBM basin assessment
- CBM case studies
- CBM economics
- CBM production operations
- CBM reservoir evaluation
- CBM reservoir fundamentals
- CBM well drilling and completion
- Cement bond logs
- Cement composition and classification
- Cement hydration
- Cement slurry design
- Cement slurry extenders
- Cement slurry retarders
- Cementing hardware
- Cementing operations
- Challenges in drilling salt formations and rubble zones
- Chemical gas tracers
- Chemical water tracers
- CHOPS operational and monitoring issues
- CHOPS reservoir assessment and candidate screening
- CHOPS sand management
- Circulatability treatment in cementing
- Coalbed methane
- Coiled tubing
- Coiled tubing applications
- Coiled tubing drilling
- Coiled tubing fatigue
- Cold heavy oil production with sand
- Combination completions
- Completion flow control accessories
- Conducting the acidizing procedure
- Contact time in cementing
- Controlling excess water production
- Controlling precipitates due to acidizing
- Converting geothermal to electric power
- Core analyses in tight gas reservoirs
- Coriolis gas flowmeters
- Cuttings analysis during mud logging
- Cuttings transport
- Cyber security
- Cyclic steam stimulation design
D
- Data driven approaches to production management
- Decision analysis: additional tools
- Decision tree analysis
- Deep hard-rock drilling
- Deepwater drilling
- Dehydration with deliquescing dessicants
- Dehydration with glycol
- Dehydration with refrigeration and hydrate suppression
- Deliverability testing of gas wells
- Desalting
- Design considerations and overall comparisons of artificial lift
- Designing single well chemical tracer test for residual oil
- Determination of flow efficiency and skin
- Determining stress orientation
- Differential calculus refresher
- Differential-pressure pipe sticking
- Digital oilfields
- Directional deviation tools
- Directional survey errors
- Directional survey for 3D reservoir modeling
- Directional well profile: surface-hole section
- Dissolved constituents in produced water
- DNA fingerprinting for reservoir characterization
- Downhole hydraulic pump types
- Downhole magnetic surveys
- Downhole PC pump selection and sizing
- Downhole PC pumps
- Downhole processing candidate screening
- Downhole processing overview
- Downhole processing technology
- Downhole sucker-rod pumps
- Downhole tool communication
- Drill bit hydraulics
- Drilling data management systems
- Drilling dynamics
- Drilling fluid environmental considerations
- Drilling fluid tests
- Drilling fluids
- Drilling HP/HT wells
- Drilling induced formation damage
- Drilling microsystems
- Dry dessicant dehydration
- Dual gradient drilling systems
- Dynamic data
- Dynamic wellbore pressure prediction
E
- Ekofisk field
- Elastic wellbore stress concentration
- Elastomers
- Elastomers for PCP systems
- Electrical submersible pumps
- Electromagnetic logging while drilling
- Empire Abo field
- ESP centrifugal pump
- ESP design
- ESP motors
- ESP optional components
- ESP power cable
- ESP surface motor controllers
- ESP system selection and performance calculations
- Estimating average reservoir pressure from diagnostic plots
- Estimating mechanical properties with seismic
- Estimating permeability considering mineralogy
- Evaluating IOR potential with single well chemical tracer test
- Evaluation of acid treatments
- Extended reach wells
F
- Facilities for steam generation
- Facility operability
- Field experience with well to well tracer tests
- Field tests of electromagnetic heating of oil
- Flow through chokes
- Flow-after-flow tests for gas wells
- Fluid flow in naturally fractured reservoirs
- Fluid flow with formation damage
- Fluid identification and characterization
- Fluid mechanics for drilling
- Fluid sampling
- Foam properties
- Forecasting gas production
- Formation damage
- Formation damage from completion workover fluids
- Formation damage from condensate banking
- Formation damage from fines migration
- Formation damage from perforating and cementing
- Formation damage from swelling clays
- Formation damage in injection wells
- Formation evaluation during mud logging
- Formation evaluation for acidizing
- Formation integrity test
- Formation resistivity determination
- Formation testing while drilling (FTWD)
- Fracture diagnostic techniques
- Fracture mechanics
- Fracture propagation models
- Fracture treatment design
- Fracturing fluids and additives
- Fracturing high-permeability formations
- Fundamentals of gas for gas lift design
G
- Gas as fertilizer feedstock
- Gas chromatography
- Gas condensate properties
- Gas facility
- Gas in place and recoverable volumes
- Gas lift equipment
- Gas lift equipment and facilities
- Gas lift for unusual environments
- Gas lift installation design
- Gas lift installation design methods
- Gas lift operations
- Gas lift valve mechanics
- Geomechanical analysis in real time
- Geomechanics in reservoir simulation
- Geothermal drilling and completion
- Geothermal energy
- Geothermal exploration
- Geothermal production measurement
- Geothermal reservoir engineering
- Gravel pack design
- Gravel placement techniques
- Green’s function for solving transient flow problems