You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


Autonomous vehicles: Difference between revisions

PetroWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
Replace this text with a brief (3-4 lines) introduction to what is covered on this page.  
Autonomous underwater vehicles (AUVs) are programmable robots that function independently from operator input. For the purposes of the oil and gas industry, AUVs are primarily used to survey seafloors before subsea infrastructures are built, to build subsea infrastructures and pipelines, and to survey pipelines after completion. AUVs can provide a less costly and invasive alternative to traditional surveying methods.


==Heading 1==  
== '''History''' ==


Replace header name above, then begin creating your text in place of this text. To make subheads to this heading, use the Heading level 3 style from the drop down. To make another heading at this level, use Heading level 2. The headings below are used on many pages so we’ve created them for you. If one or more doesn’t apply to your page, you can delete them. Make your headings “sentence” case (initial capital followed by all lowercase except proper names or abbreviations normally rendered in uppercase, such as MWD or EOR).  
Torpedoes are technically the first AUVs, and their history can be traced back to submarines (Ref 1). The first submarine, The Turtle, was created in 1775 in Saybrook, Connecticut, by brothers David and Ezra Bushnell. One person could fit inside of the wooden, hand-and-foot-operated vehicle (not fully submersible as it floated on the surface in even the roughest waters) and the air supply lasted for 30 minutes. Although the Turtle was the first submarine to be involved in a naval battle, in New York Harbor in 1776, it was not until 1879 that the world’s first “practical powered” submarine was built by J.B. Cochran.


==References==
It was not, however, until the 1970s that AUVs became widely used and it took about 30 years for them to be introduced into the oil and gas industry. (Ref 2)


==Noteworthy papers in OnePetro==  
== References ==


==External links==  
== Noteworthy papers in OnePetro ==
 
== External links ==


==See also== 
==See also== 

Revision as of 01:08, 26 May 2015

Autonomous underwater vehicles (AUVs) are programmable robots that function independently from operator input. For the purposes of the oil and gas industry, AUVs are primarily used to survey seafloors before subsea infrastructures are built, to build subsea infrastructures and pipelines, and to survey pipelines after completion. AUVs can provide a less costly and invasive alternative to traditional surveying methods.

History

Torpedoes are technically the first AUVs, and their history can be traced back to submarines (Ref 1). The first submarine, The Turtle, was created in 1775 in Saybrook, Connecticut, by brothers David and Ezra Bushnell. One person could fit inside of the wooden, hand-and-foot-operated vehicle (not fully submersible as it floated on the surface in even the roughest waters) and the air supply lasted for 30 minutes. Although the Turtle was the first submarine to be involved in a naval battle, in New York Harbor in 1776, it was not until 1879 that the world’s first “practical powered” submarine was built by J.B. Cochran.

It was not, however, until the 1970s that AUVs became widely used and it took about 30 years for them to be introduced into the oil and gas industry. (Ref 2)

References

Noteworthy papers in OnePetro

External links

==See also==