You must log in to edit PetroWiki. Help with editing

Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information


"internal diameter"

PetroWiki
Revision as of 11:57, 6 November 2020 by D Nathan Meehan (D nathanmeehan) (talk | contribs) (Definition of internal diameter to reference drift and nominal for tubulars)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The internal width of a tubular such as casing or tubing measured from one wall to the opposite wall passing through the center. Units are length. can refer to drift diameter or nominal diameter.