You must log in to edit PetroWiki. Help with editing
Content of PetroWiki is intended for personal use only and to supplement, not replace, engineering judgment. SPE disclaims any and all liability for your use of such content. More information
Category:Categories
Jump to navigation
Jump to search
- 1-10
- 1.1.2 Authority for expenditures (AFE)
- 1.10.1 Drill string components and drilling tools
- 1.10.2 Directional drilling systems and equipment
- 1.10.3 Well control equipment
- 1.10.5 Offshore drilling units
- 1.10 Drilling equipment
- 1.11.1 Fluid mechanics for drilling
- 1.11.3 Drilling fluid management and disposal
- 1.11.4 Solids control
- 1.11.7 Cuttings transport
- 1.11 Drilling fluids and materials
- 1.12.1 Measurement while drilling
- 1.12.2 Logging while drilling
- 1.12.3 Mud logging & surface measurements
- 1.12.3 Mud logging and surface measurements
- 1.12.3 Mud logging or surface measurements
- 1.12.4 Real time data transmission
- 1.12.5 Drilling data management
- 1.12 Drilling measurement, data acquisition, and automation
- 1.13.1 Casing design
- 1.13.2 Casing material selection
- 1.13.3 Cement formulation
- 1.13.4 Cement and bond evaluation
- 1.13 Casing and cementing (12 members)
- 1.1 Well planning
- 1.2.1 Wellbore integrity
- 1.2.2 Geomechanics
- 1.2.3 Rock properties
- 1.2 Wellbore design
- 1.3.1 Surface wellheads
- 1.3.2 Subsea wellheads
- 1.3.3 Wellhead integrity
- 1.3 Wellhead design
- 1.4.2 Drill pipe selection
- 1.4 Drillstring design
- 1.5.1 Bit design
- 1.5.1 Drill bit design
- 1.5 Drill bits (12 members)
- 1.6.10 Coring and fishing
- 1.6.11 Running and setting casing
- 1.6.6 Drilling automation
- 1.6.7 Directional drilling
- 1.6 Drilling operations (68 members)
- 1.7.1 Underbalanced drilling
- 1.7.2 Managed pressure drilling
- 1.7.3 Dual gradient drilling
- 1.7.5 Well control
- 1.7.6 Wellbore pressure management
- 1.7 Pressure management
- 1.8.1 Rock or fluid incompatibility
- 1.8.3 Fines invasion
- 1.8 Formation damage
- 1.9.1 Surveying and survey programs
- 1.9.4 Survey tools
- 1.9 Wellbore positioning
- 1 Well drilling
- 2.1.1 Perforating
- 2.1.3 Sand or solids control
- 2.1.4 Screen selection
- 2.1.5 Gravel pack design and evaluation
- 2.1.6 Frac and pack
- 2.1.7 Deepwater completions
- 2.1 Completion operations
- 2.2 Production string design and installation
- 2.3.1 Remote monitoring
- 2.3.2 Downhole sensors and control equipment
- 2.3.3 Inflow control equipment
- 2.3 Well monitoring systems
- 2.3 Well monitoring systems or intelligent wells
- 2.5.1 Fracture design and containment
- 2.5.2 Fracturing Materials (Fluids, Proppant)
- 2.5.2 Fracturing materials
- 2.5 Hydraulic fracturing
- 2.5 Hydraulic fracturing (fluids or proppant)
- 2 Well completion (24 members)
- 3.1.1 Beam and related pumping techniques
- 3.1.2 Electric submersible pumps
- 3.1.3 Hydraulic and jet pumps
- 3.1.5 Plunger lift
- 3.1.6 Gas Lift
- 3.1.6 Gas lift
- 3.1.7 Progressing cavity pumps
- 3.1 Artificial Lift Systems
- 3.1 Artificial lift systems
- 3.2.2 Downhole intervention and remediation
- 3.2.2 Downhole intervention and remediation (including wireline and coiled tubing)
- 3.2.3 Hydraulic fracturing design, implementation, and optimization
- 3.2.4 Acidizing
- 3.2.5 Downhole produced sand or solids management and control
- 3.2.5 Produced sand or solids management and control
- 3.2.6 Produced water management and control
- 3.2.7 Downhole fluid separation, management, and disposal
- 3.2.7 Downhole fluids seperation, management, and disposal
- 3.2.8 Well performance modeling and tubular optimization
- 3.2 Well operations, optimization, and stimulation
- 3.3.1 Production logging
- 3.3.2 Borehole Imaging and Wellbore Seismic
- 3.3.2 Borehole imaging and wellbore seismic
- 3.3.3 Downhole and wellsite flow metering
- 3.3 Well and reservoir surveillance and monitoring
- 3.4.1 Inhibition and remediation of hydrates, scale, paraffin or wax, and asphaltene
- 3.4.2 Well fluid analysis
- 3.4.3 Corrosion inhibition and management
- 3.4 Production chemistry, metallurgy, and biology
- 3.5 Well decommissioning and site remediation
- 3.6 Fundamental research in production and operations
- 3 Production and Well Operations
- 3 Production and well operations
- 4.1.2 Separate and treating
- 4.1.2 Separation and treating (33 members)
- 4.1.3 Dehydration
- 4.1.4 Gas processing
- 4.1.5 Processing Equipment
- 4.1.5 Processing equipment
- 4.1.6 Compressors, engines, and turbines (25 members)
- 4.1.7 Electrical systems
- 4.1.9 Tanks and storage systems
- 4.11 Fundamental research in facilities design, construction, and operation
- 4.1 Processing Systems and Design
- 4.1 Processing systems and design
- 4.2.1 Piping design and simulation
- 4.2.2 Pipeline transient behavior
- 4.2.3 Materials and corrosion
- 4.2 Pipelines, flowlines, and risers
- 4.3.1 Hydrates
- 4.3.2 Precipitates
- 4.3.3 Solids
- 4.3.4 Scale
- 4.3 Flow assurance
- 4.4.3 Multiphase measurement
- 4.4 Measurement and control
- 4.5.10 Remotely operated vehicles
- 4.5.7 Controls and umbilicals
- 4.5.9 Subsea processing
- 4.5 Offshore facilities and subsea systems
- 4.6.1 Compressed natural gas
- 4.6.2 Liquified natural gas
- 4.6.3 Gas to liquids
- 4.6 Natural gas
- 4.7 Unconventional production facilities
- 4.8.1 Onshore construction management
- 4.9.3 Pipeline pigging
- 4 Facilities design, construction, and operation
- 5.1.10 Reservoir geomechanics
- 5.1.1 Exploration, development, and structural geology
- 5.1.3 Sedimentology
- 5.1.5 Geologic modeling
- 5.1.6 Near well and vertical seismic profiles
- 5.1.7 Seismic processing and interpretation
- 5.1.8 Seismic modeling
- 5.1.8 Seismic modelling
- 5.1.9 Four dimensional and four component seismic
- 5.10.1 CO2 capture and sequestration
- 5.1 Reservoir characterization
- 5.2.1 Phase behavior and PVT measurements (25 members)
- 5.2.2 Fluid modeling, equations of state
- 5.2.4 Compaction
- 5.2 Fluid characterization
- 5.3.1 Flow in porous media
- 5.3.2 Multiphase flow
- 5.3.4 Integration of geomechanics in models
- 5.3.4 Reduction of residual oil saturation
- 5.3.9 Steam assisted gravity drainage
- 5.3 Enhanced recovery
- 5.3 Reservoir fluid dynamics
- 5.4.11 Cold heavy oil production
- 5.4.1 Waterflooding
- 5.4.2 Gas injection methods
- 5.4.4 Reduction of residual oil saturation
- 5.4.5 Conformance Improvement
- 5.4.5 Conformance improvement
- 5.4.6 Thermal methods
- 5.4.7 Chemical flooding methods
- 5.4.9 Miscible methods
- 5.4 Improved and enhanced recovery
- 5.5.3 Scaling methods
- 5.5.7 Streamline simulation
- 5.5.8 History matching
- 5.5 Reservoir simulation
- 5.6.1 Open hole or cased hole log analysis
- 5.6.2 Core analysis
- 5.6.3 Pressure transient analysis
- 5.6.3 Pressure transient testing
- 5.6.4 Drillstem or well testing
- 5.6.5 Tracer test analysis
- 5.6.6 Cross well tomography
- 5.6.7 Formation test analysis
- 5.6.8 Well performance monitoring or inflow performance
- 5.6.9 Production forecasting
- 5.6 Formation evaluation and management
- 5.7.1 Estimates of resource in place
- 5.7.2 Recovery factors
- 5.7.3 Deterministic methods
- 5.7.5 Economic evaluations
- 5.7.6 Reserves classification
- 5.7 Reserves evaluation
- 5.8.1 Tight gas
- 5.8.2 Shale gas
- 5.8.3 Coal seam gas
- 5.8.5 Oil sand, oil shale, or bitumen
- 5.8.6 Naturally fractured reservoir
- 5.8.7 Carbonate reservoir
- 5.8.8 Gas condensate reservoirs
- 5.8 Unconventional and complex reservoirs
- 5.9.1 Gas hydrates
- 5.9.2 Geothermal resources
- 5 Reservoir description and dynamics
- 6.1.5 Human resources, competence, and training
- 6.3.1 Human factors
- 6.3.5 Process safety
- 6.3 Safety
- 6.4 Security
- 6.5.1 Air emissions
- 6.5.3 Waste management
- 6.5.4 Naturally occurring radioactive materials
- 6.5 Environment
- 6.6.4 Sustainable development
- 6 Reservoir description and dynamics
- 7.1.5 Portfolio analysis, management, and optimization
- 7.1.9 Project economics or valuation
- 7.2.1 Risk, uncertainty, and risk assessment
- 7.2.3 Decision making processes
- 7.2.4 Statistical techniques for managing risk
- 7.2 Risk management and decision making
- 7.3.3 Project management
- 7.4.4 Energy policy and regulation
- 7.4.5 Future of energy, oil and gas
- 7.4 Energy economics
- 7.6.1 Knowledge management
- 7.6.2 Data integration
- 7.6 Information management and systems
- A
- Acronyms
- Alaska
- Asia Pacific
- B
- Basins
- C
- California
- Carbonates
- Category: 1.10 Drilling equipment
- D
- E
- F
- Fields
- G
- Giant oil fields
- Glossary
- H
- Heavy Oil
- Help
- I
- Iran
- Iraq
- J
- K
- Kuwait
- L
- M
- Malaysia
- Middle East
- N
- New Mexico
- O
- Oil
- P
- PEH
- POST
- Pages with broken file links
- Petroleum Engineering Handbook
- Petrophysics
- Prudhoe Bay field
- Q
- R
- Random page
- RichText editor
- S
- SPE Bookstore
- Saudi Arabia
- Search
- Super giant fields
- Symbols
- T
- Texas
- Tutorials
- U
- US
- V
- W
- West Howard-Glasscock unit
- Whitney Canyon-Carter Creek field
- X
- Y
- Z
This category currently contains no pages or media.